The vCenter STS service must be configured to use a specified IP address and port.

An XCCDF Rule

Description

<VulnDiscussion>The server must be configured to listen on a specified IP address and port. Without specifying an IP address and port for server to use, the server will listen on all IP addresses available. Accessing the hosted application through an IP address normally used for nonapplication functions opens the possibility of user access to resources, utilities, files, ports, and protocols that are protected on the desired application IP address.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID: SV-258978r934592_rule
Severity: Medium
References: CCI-000382
Updated: 17 days ago

Navigate to and open:

/usr/lib/vmware-sso/vmware-sts/conf/server.xml

The STS service has 2 connectors with the below pairs of ports and addresses.
Navigate to the target <Connector> node and configure the port and address as follows.

port="${bio-custom.http.port}"
address="localhost"

port="${bio-ssl-localhost.https.port}"
address="localhost"

Restart the service with the following command:

# vmon-cli --restart sts

Note: The connector with port="${bio-ssl-clientauth.https.port}" should not have address set.

The vCenter STS service must be configured to use a specified IP address and port.

Description

Remediation - Manual Procedure