The NSX Tier-1 Gateway firewall must be configured to inspect traffic at the application layer.
An XCCDF Rule
Description
<VulnDiscussion>Application inspection enables the firewall to control traffic based on different parameters that exist within the packets such as enforcing application-specific message and field length. Inspection provides improved protection against application-based attacks by restricting the types of commands allowed for the applications. Application inspection all enforces conformance against published RFCs. Some applications embed an IP address in the packet that needs to match the source address that is normally translated when it goes through the firewall. Enabling application inspection for a service that embeds IP addresses, the firewall translates embedded addresses and updates any checksum or other fields that are affected by the translation. Enabling application inspection for a service that uses dynamically assigned ports, the firewall monitors sessions to identify the dynamic port assignments, and permits data exchange on these ports for the duration of the specific session.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-263408r977991_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
From the NSX Manager web interface, go to Security >> Policy Management >> Gateway Firewall >> Gateway Specific Rules.
For each Tier-1 Gateway and each rule that should have a Context Profile enabled, click the pencil icon in the Context Profile column.
Select an existing Context Profile or create a custom one then click "Apply".