The Tanium Operating System (TanOS) must notify the ISSO and ISSM of failed security verification tests.
An XCCDF Rule
Description
<VulnDiscussion>If personnel are not notified of failed security verification tests, they will not be able to take corrective action and the unsecure condition(s) will remain. Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes, but is not limited to, establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. Notifications provided by information systems include electronic alerts, messages to local computer consoles, and/or hardware indications, such as lights. This requirement applies to operating systems performing security function verification/testing and/or systems and environments that require this functionality.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-254854r958558_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
1. Access the TanOS interactively.
2. Press "A" for "Appliance Configuration Menu," and then press "Enter".
3. Press "4" for "Syslog Configuration," and then press "Enter".