The Exchange send connector connections count must be limited.
An XCCDF Rule
Description
<VulnDiscussion>The Exchange Send connector setting controls the maximum number of simultaneous outbound connections allowed for a given SMTP connector and can be used to throttle the SMTP service if resource constraints warrant it. If the limit is too low, connections may be dropped. If the limit is too high, some domains may use a disproportionate resource share, denying access to other domains. Appropriate tuning reduces risk of data delay or loss.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-259679r961155_rule
- Severity
- Low
- References
- Updated
Remediation - Manual Procedure
Update the EDSP to specify the "MaxOutboundConnections" value.
Open the Exchange Management Shell and enter the following command:
Set-TransportService -Identity <'IdentityName'> -MaxOutboundConnections 1000