Exchange message size restrictions must be controlled on Send connectors.
An XCCDF Rule
Description
<VulnDiscussion>Email system availability depends in part on best practice strategies for setting tuning configurations. For message size restrictions, multiple places exist to set or override inbound or outbound message size. Failure to control the configuration strategy can result in loss of data or system availability. This setting enables the administrator to control the maximum message size on a Send connector. Using connectors to control size limits may necessitate applying message size limitations in multiple places, with the potential of introducing conflicts and impediments in the mail flow. Changing this setting at the connector overrides the global one. Therefore, if operational needs require it, the connector value may be set lower than the global value with the rationale documented in the EDSP.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-259602r961155_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Update the EDSP to reflect the maximum message send size.
Open the Exchange Management Shell and enter the following command:
Set-SendConnector -Identity <'IdentityName'> -MaxMessageSize <MaxSendSize>