Skip to content
Catalogs
XCCDF
Juniper SRX Services Gateway IDPS Security Technical Implementation Guide
SRG-NET-000249-IDPS-00222
The Juniper Networks SRX Series Gateway IDPS must send an immediate alert to, at a minimum, the Security Control Auditor (SCA) when malicious code is detected.
The Juniper Networks SRX Series Gateway IDPS must send an immediate alert to, at a minimum, the Security Control Auditor (SCA) when malicious code is detected. An XCCDF Rule
The Juniper Networks SRX Series Gateway IDPS must send an immediate alert to, at a minimum, the Security Control Auditor (SCA) when malicious code is detected.
Medium Severity
<VulnDiscussion>Without an alert, security personnel may be unaware of an impending failure of the audit capability, and the ability to perform forensic analysis and detect rate-based and other anomalies will be impeded.
The IDPS generates an immediate (within seconds) alert which notifies designated personnel of the incident. Sending a message to an unattended log or console does not meet this requirement since that will not be seen immediately. These messages should include a severity level indicator or code as an indicator of the criticality of the incident.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>