The Juniper multicast Designated Router (DR) must be configured to filter the IGMP and MLD Report messages to allow hosts to join only multicast groups that have been approved by the organization.
An XCCDF Rule
Description
<VulnDiscussion>Real-time multicast traffic can entail multiple large flows of data. Large unicast flows tend to be fairly isolated (i.e., someone downloading a file here or there), whereas multicast can have broader impact on bandwidth consumption, resulting in extreme network congestion. Hence, it is imperative that there is multicast admission control to restrict which multicast groups hosts are allowed to join via IGMP or MLD.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-254050r844262_rule
- Severity
- Low
- References
- Updated
Remediation - Manual Procedure
Configure the DR to filter the IGMP and MLD report messages to allow hosts to join only those multicast groups that have been approved.
set policy-options policy-statement <name> term unauth-groups from route-filter 224.0.1.2/32 exact
set policy-options policy-statement <name> term unauth-groups from route-filter 224.0.2.2/32 exact
set policy-options policy-statement <name> term unauth-groups then reject
set policy-options policy-statement <name> term accept-others then accept