The Juniper BGP router must be configured to enable the Generalized TTL Security Mechanism (GTSM).
An XCCDF Rule
Description
<VulnDiscussion>GTSM is designed to protect a router's IP-based control plane from DoS attacks. Many attacks focused on CPU load and line-card overload can be prevented by implementing GTSM on all Exterior Border Gateway Protocol speaking routers. GTSM is based on the fact that the vast majority of control plane peering is established between adjacent routers; that is, the Exterior Border Gateway Protocol peers are either between connecting interfaces or between loopback interfaces. Since TTL spoofing is considered nearly impossible, a mechanism based on an expected TTL value provides a simple and reasonably robust defense from infrastructure attacks based on forged control plane traffic.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-254044r997536_rule
- Severity
- Low
- References
- Updated
Remediation - Manual Procedure
Configure all Exterior Border Gateway Protocol peering sessions to use GTSM.
set firewall family inet filter gtsm term 1 from protocol tcp
set firewall family inet filter gtsm term 1 from ttl 255
set firewall family inet filter gtsm term 1 from destination-port bgp
set firewall family inet filter gtsm term 1 then accept