The Juniper router must be configured to implement message authentication for all control plane protocols.
An XCCDF Rule
Description
<VulnDiscussion>A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to learn confidential information about the site's network or used to disrupt the network's ability to communicate with other networks. This is known as a "traffic attraction attack" and is prevented by configuring neighbor router authentication for routing updates. This requirement applies to all IPv4 and IPv6 protocols that are used to exchange routing or packet forwarding information; this includes all Interior Gateway Protocols (such as OSPF, EIGRP, and IS-IS) and Exterior Gateway Protocols (such as BGP), MPLS-related protocols (such as LDP), and multicast-related protocols.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-254025r945861_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure authentication to be enabled for every protocol that affects the routing or forwarding tables.
set security ipsec security-association <sa name> manual direction bidirectional protocol esp
set security ipsec security-association <sa name> manual direction bidirectional spi <SPI value>
set security ipsec security-association <sa name> manual direction bidirectional authentication algorithm hmac-sha-256-128
set security ipsec security-association <sa name> manual direction bidirectional authentication key ascii-text <PSK value>