The Juniper BGP router must be configured to reject outbound route advertisements for any prefixes that do not belong to any customers or the local autonomous system (AS).
An XCCDF Rule
Description
<VulnDiscussion>Advertisement of routes by an AS for networks that do not belong to any of its customers pulls traffic away from the authorized network. This causes a denial of service (DoS) on the network that allocated the block of addresses and may cause a DoS on the network that is inadvertently advertising it as the originator. It is also possible that a misconfigured or compromised router within the GIG IP core could redistribute IGP routes into BGP, thereby leaking internal routes.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-253977r843964_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure all eBGP routers to filter outbound route advertisements for prefixes that are not allocated to or belong to any customer or the local AS.
set policy-options route-filter-list customer1-routes <customer route 1/mask> exact
set policy-options route-filter-list customer1-routes <customer route 2/mask> exact
set policy-options route-filter-list customer1-routes-ipv6 <customer route 1/prefix> exact
set policy-options route-filter-list customer1-routes-ipv6 <customer route 2/prefix> exact