The Juniper router must be configured to enforce approved authorizations for controlling the flow of management information within the device based on control policies.
An XCCDF Rule
Description
<VulnDiscussion>A mechanism to detect and prevent unauthorized communication flow must be configured or provided as part of the system design. If management information flow is not enforced based on approved authorizations, the network device may become compromised. Information flow control regulates where management information is allowed to travel within a network device. The flow of all management information must be monitored and controlled so it does not introduce any unacceptable risk to the network device or data. Application-specific examples of enforcement occur in systems that employ rule sets or establish configuration settings that restrict information system services or message-filtering capability based on message content (e.g., implementing key word searches or using document characteristics). Applications providing information flow control must be able to enforce approved authorizations for controlling the flow of management information within the system in accordance with applicable policy.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-217310r991980_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Step 1: Configure the router to restrict management access to specific IP addresses via SSH as shown in the example below.
[edit firewall family inet]
set filter RESTRICT_MGMT_ACCESS term ALLOW_SSH from source-address x.x.x.x/24
set filter RESTRICT_MGMT_ACCESS term ALLOW_SSH from protocol tcp
set filter RESTRICT_MGMT_ACCESS term ALLOW_SSH from port ssh