An IP-based VTC system implementing a single CODEC that supports conferences on multiple networks with different classification levels must be implemented in such a way that configuration information for a network having a higher classification level is not disclosed to a network having a lower classification level.
An XCCDF Rule
Description
<VulnDiscussion>Connecting the CODEC to a network while it is being reconfigured could lead to the disclosure of sensitive configuration information for a network having a higher classification level to a network having a lower classification level. Ideally, the CODEC will be disconnected from any network while it is being reconfigured. However, the requirement can be met by using a procedure that purges the configuration for the currently connected network, power cycling the CODEC as required (for a minimum of 60 seconds per SRG-VOIP-000140) as the CODEC is switched to the next network, and then reconfiguring the CODEC for the next session.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-259897r956911_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Do one of the following:
- Architect, implement, and configure the system so the A/B, A/B/C, or A/B/C/D switch connects the CODEC to an unused switch position while it is being reconfigured during transition from one network to another.
- Architect, implement, and configure the system so the CODEC configuration is purged before it is switched to the next network, the CODEC is power cycled for the required time period as the A/B, A/B/C, or A/B/C/D switch connects the CODEC to the next network, and then the CODEC is reconfigured for that network.
- If a manual switching procedure is used, physically disconnect the CODEC from any network while it is reconfigured for the next network.