The Cisco BGP switch must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS).

An XCCDF Rule

Description

<VulnDiscussion>Accepting route advertisements belonging to the local AS can result in traffic looping or being black-holed, or at a minimum, using a non-optimized path.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID: SV-221104r999713_rule
Severity: Medium
References: CCI-001368
Updated: 23 days ago

Configure the switch to reject inbound route advertisements for any prefixes belonging to the local AS.

Step 1: Add to the prefix filter list those prefixes belonging to the local autonomous system.

SW1(config)# ip prefix-list PREFIX_FILTER seq 74 deny x.13.1.0/24 le 32
Step 2: If not already completed to be compliant with previous requirement, apply the prefix list filter inbound to each external BGP neighbor as shown in the example below:

SW1(config)# router bgp xx
SW1(config-router)# neighbor x.1.12.2
SW1(config-router-neighbor)# address-family ipv4 unicast
SW1(config-router-neighbor-af)# prefix-list PREFIX_FILTER in
SW1(config-router-neighbor-af)# exit
SW1(config-router-neighbor)# exit
SW1(config-router)# neighbor x.2.44.4
SW1(config-router-neighbor)# address-family ipv4 unicast
SW1(config-router-neighbor-af)# prefix-list PREFIX_FILTER in
SW1(config-router-neighbor-af)# end

The Cisco BGP switch must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS).

Description

Remediation - Manual Procedure