Skip to content

The Cisco switch must be configured with only one local account to be used as the account of last resort in the event the authentication server is unavailable.

An XCCDF Rule

Description

<VulnDiscussion>Authentication for administrative (privileged-level) access to the device is required at all times. An account can be created on the device's local database for use when the authentication server is down or connectivity between the device and the authentication server is not operable. This account is referred to as the account of last resort since it is intended to be used as a last resort and when immediate administrative access is absolutely necessary. The account of last resort logon credentials must be stored in a sealed envelope and kept in a safe. The safe must be periodically audited to verify the envelope remains sealed. The signature of the auditor and the date of the audit should be added to the envelope as a record. An alternative to using a sealed envelope in a safe would be credential files, separated by technology, located in a secured location on a file server, with the files only accessible to those administrators authorized to use the accounts of last resort, and access to that location monitored by a central log server. Administrators should secure the credentials and disable the root account (if possible) when not needed for system administration functions.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID
SV-220587r960969_rule
Severity
Medium
References
Updated



Remediation - Manual Procedure

Step 1: Configure a local account with the necessary privilege level to troubleshoot network outage and restore operations as shown in the following example: 

SW2(config)#username xxxxxxxxxxx privilege 10 common-criteria-policy PASSWORD_POLICY password xxxxxxxxxx

Step 2: Configure the authentication order to use the local account if the authentication server is not reachable as shown in the following example: