The Cisco BGP router must be configured to enable the Generalized TTL Security Mechanism (GTSM).
An XCCDF Rule
Description
<VulnDiscussion>As described in RFC 3682, GTSM is designed to protect a router's IP-based control plane from denial of service (DoS) attacks. Many attacks focused on CPU load and line-card overload can be prevented by implementing GTSM on all Exterior Border Gateway Protocol-speaking routers. GTSM is based on the fact that the vast majority of control plane peering is established between adjacent routers; that is, the Exterior Border Gateway Protocol peers are either between connecting interfaces or between loopback interfaces. Since TTL spoofing is considered nearly impossible, a mechanism based on an expected TTL value provides a simple and reasonably robust defense from infrastructure attacks based on forged control plane traffic.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-216999r855842_rule
- Severity
- Low
- References
- Updated
Remediation - Manual Procedure
Configure TTL security on all external BGP neighbors as shown in the example below:
R1(config)#router bgp xx
R1(config-router)#neighbor x.1.1.9 ttl-security hops 1
R1(config-router)#neighbor x.2.1.7 ttl-security hops 1