The Cisco ASA must be configured to generate audit records showing starting and ending time for administrator access to the system.
An XCCDF Rule
Description
<VulnDiscussion>Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-239937r961830_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure the ASA to log session start and ending per admin session as shown in the example below.
ASA(config)# logging enable
ASA(config)# logging timestamp
ASA(config)# logging buffered informational
ASA(config)# end