The Cisco ASA must be configured to produce audit records containing information to establish when the events occurred.

An XCCDF Rule

Description

<VulnDiscussion>Without establishing the time (date/time) an event occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Associating the date and time the event occurred with each event log entry provides a means of investigating an attack or identifying an improperly configured IDPS. While auditing and logging are closely related, they are not the same. Logging is recording data about events that take place in a system, while auditing is the use of log records to identify security-relevant information such as system or user accesses. In short, log records are audited to establish an accurate history. Without logging, it would be impossible to establish an audit trail.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID: SV-239874r682908_rule
Severity: Medium
References: CCI-000131
Updated: 17 days ago

Enable logging for connection events.

Step 1: Navigate to Configuration >> ASA Firepower Configuration >> Policies >> Access Control Policy. The Access Control Policy page appears.

Step 2: Click the edit icon next to the access control policy you want to configure. The access control policy editor appears.
Step 3: Click the edit icon next to a rule to edit. Select a logging option either log at Beginning and End of Connection or log at End of Connection. Select the Syslog check box. 

Step 4: Click Save.
---------------------------------------------------
Enable logging for Intrusion events.

Step 1: Navigate to Configuration >> ASA Firepower Configuration >> Policies >> Intrusion Policy >> Intrusion Policy. The Intrusion Policy page appears.

Step 2: Click Advanced Setting. The Advanced Settings page appears.

Step 3: If Syslog Alerting under External Responses is enabled, click Edit. If the configuration is disabled, click Enabled, then click Edit. The Syslog Alerting page appears.

Step 4: In the Logging Hosts field, enter the remote access IP address you want to specify as logging host.

Step 5: Click Save.

The Cisco ASA must be configured to produce audit records containing information to establish when the events occurred.

Description

Remediation - Manual Procedure