The Photon operating system must use a reverse-path filter for IPv4 network traffic.
An XCCDF Rule
Description
<VulnDiscussion>Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems that are routers for complicated networks but is helpful for end hosts and routers serving small networks.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-256573r887393_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
At the command line, run the following command:
# for SETTING in $(/sbin/sysctl -aN --pattern "net.ipv4.conf.(all|default|eth.*)\.rp_filter"); do sed -i -e "/^${SETTING}/d" /etc/sysctl.conf;echo $SETTING=1>>/etc/sysctl.conf; done
# /sbin/sysctl --load