Skip to content

The Photon operating system must configure sshd to use FIPS 140-2 ciphers.

An XCCDF Rule

Description

<VulnDiscussion>Privileged access contains control and configuration information and is particularly sensitive, so additional protections are necessary. This is maintained by using cryptographic mechanisms such as encryption to protect confidentiality. Nonlocal maintenance and diagnostic activities are conducted by individuals communicating through an external network (e.g., the internet) or internal network. Local maintenance and diagnostic activities are carried out by individuals physically present at the information system or information system component and not communicating across a network connection. This requirement applies to hardware/software diagnostic test equipment or tools. It does not cover hardware/software components that may support information system maintenance, yet are a part of the system (e.g., the software implementing "ping," "ls," "ipconfig," or the hardware and software implementing the monitoring port of an Ethernet switch). The operating system can meet this requirement by leveraging a cryptographic module. Satisfies: SRG-OS-000394-GPOS-00174, SRG-OS-000424-GPOS-00188</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID
SV-256534r942493_rule
Severity
Low
References
Updated



Remediation - Manual Procedure

Navigate to and open:

/etc/ssh/sshd_config

Ensure the "Ciphers" line is uncommented and set to the following: