RHEL 9 must not forward IPv6 source-routed packets by default.
An XCCDF Rule
Description
<VulnDiscussion>Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It must be disabled unless it is absolutely required.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
- ID
- SV-257977r943011_rule
- Severity
- Medium
- References
- Updated
Remediation - Manual Procedure
Configure RHEL 9 to not forward IPv6 source-routed packets by default.
Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory:
net.ipv6.conf.default.accept_source_route = 0