The Palo Alto Networks security platform providing encryption intermediary services must implement NIST FIPS-validated cryptography to generate cryptographic hashes.

An XCCDF Rule

Description

<VulnDiscussion>Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The network element must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>

ID: SV-228876r831617_rule
Severity: Medium
References: CCI-002450
Updated: 8 months ago

Power off the device by unplugging it from the electrical outlet.
 
Connect a console cable from the console port to a computer serial port, and use a terminal program to connect to the Palo Alto Networks device.
 
The serial parameters are "9600 baud", "8 data bits", "no parity", and "1 stop bit".
 A USB to serial adapter will be necessary if the computer does not have a serial port.

During the boot sequence, this message will appear:

Autoboot to default partition in 5 seconds.

Enter "maint" to boot to "maint" partition.

Enter "maint" to enter maintenance mode.

Press "Enter", and the "Maintenance Recovery tool" menu will appear.

Select "Set FIPS Mode" (or fips-cc for later versions) from the menu; once the device has finished rebooting, it will be in FIPS mode.

Note: This will remove all installed licenses and disable the serial port.

The Palo Alto Networks security platform providing encryption intermediary services must implement NIST FIPS-validated cryptography to generate cryptographic hashes.

Description

Remediation - Manual Procedure