Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Resources
Documents
Publishers
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
Juniper EX Series Switches Layer 2 Switch Security Technical Implementation Guide
Juniper EX Series Switches Layer 2 Switch Security Technical Implementation Guide
An XCCDF Benchmark
Details
Profiles
Items
Prose
File Metadata
25 rules organized in 25 groups
SRG-NET-000148-L2S-000015
1 Rule
The Juniper EX switch must be configured to uniquely identify all network-connected endpoint devices before establishing any connection.
High Severity
Controlling LAN access via 802.1x authentication can assist in preventing a malicious user from connecting an unauthorized PC to an access interface to inject or receive data from the network without detection. 802.1x includes Static MAC Bypass and MAC RADIUS for those devices that do not offer a supplicant.
SRG-NET-000168-L2S-000019
1 Rule
The Juniper layer 2 switch must be configured to disable all dynamic VLAN registration protocols.
Medium Severity
Dynamic VLAN registration protocols provide centralized management of VLAN domains, which can reduce administration in a switched network. Interfaces are assigned to VLANs and the VLAN is dynamically registered on the trunked interface. Removing the last active interface from the VLAN automatically prunes the VLAN from the trunked interface, preserving bandwidth. Member switches remain synchronized via the exchange of Protocol Data Units (PDU). Protocols like Cisco VLAN Trunk Protocol (VTP) and IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP) permit dynamically registering/de-registering VLANs on trunked interfaces. Without authentication, forged PDUs can allow access to previously inaccessible VLANs, or inclusion of unauthorized VLANs or switches. Only VTP currently supports authentication.
SRG-NET-000193-L2S-000020
1 Rule
The Juniper EX switch must be configured to manage excess bandwidth to limit the effects of packet flooding types of denial-of-service (DoS) attacks.
Medium Severity
DoS attacks can be mitigated by ensuring sufficient capacity is available for mission-critical traffic. Managing capacity may include, for example, establishing selected network usage priorities or quotas and enforcing them using rate limiting, quality of service (QoS), or other resource reservation control methods. These measures may also mitigate the effects of sudden decreases in network capacity that are the result of accidental or intentional physical damage to telecommunications facilities (such as cable cuts or weather-related outages). A Junos OS classifier identifies and separates traffic flows and provides the means to prioritize traffic later in the class-of-service (CoS) process. By default, Junos implements a standard CoS (QoS) strategy. Although some devices implement different queues or queue numbers, generally there is at least a four-queue model with two active queues: 95 percent Best Effort (BE) and 5 percent Network Control (NE). A behavior aggregate (BA) classifier performs this function by associating discriminating values with forwarding classes and loss priorities. Unless overridden, Junos OS applies the default CoS to all interfaces. Junos OS provides multiple predefined BA classifier types, which the site can combine and supplement with custom CoS configuration as needed to achieve overall traffic classification goals.
SRG-NET-000331-L2S-000001
1 Rule
The Juniper EX switch must be configured to permit authorized users to select a user session to capture.
Medium Severity
Without the capability to select a user session to capture/record or view/hear, investigations into suspicious or harmful events would be hampered by the volume of information captured. The volume of information captured may also adversely impact the operation for the network. Session audits may include port mirroring, tracking websites visited, and recording information and/or file transfers.
SRG-NET-000332-L2S-000002
1 Rule
The Juniper EX switch must be configured to permit authorized users to remotely view, in real time, all content related to an established user session from a component separate from the layer 2 switch.
Medium Severity
Without the capability to remotely view/hear all content related to a user session, investigations into suspicious user activity would be hampered. Real-time monitoring allows authorized personnel to take action before additional damage is done. The ability to observe user sessions as they are happening allows for interceding in ongoing events that after-the-fact review of captured content would not allow.
SRG-NET-000343-L2S-000016
1 Rule
The Juniper EX switch must be configured to authenticate all network-connected endpoint devices before establishing any connection.
Medium Severity
Without authenticating devices, unidentified or unknown devices may be introduced, thereby facilitating malicious activity. Device authentication is a solution enabling an organization to manage devices. It is an additional layer of authentication ensuring only specific pre-authorized devices can access the system. This requirement applies to applications that connect either locally, remotely, or through a network to an endpoint device (including, but not limited to, workstations, printers, servers (outside a datacenter), VoIP Phones, and VTC CODECs. Gateways and SOA applications are examples of where this requirement would apply. For Juniper EX, configure 802.1 x authentication on all host-facing access interfaces. To authenticate those devices that do not support an 802.1x supplicant, Static MAC Bypass or MAC RADIUS must be configured. Junos supports three supplicant types: single-secure (authenticate and permit only a single device), multiple (separately authenticate and permit multiple devices), and single (authenticate the first supplicant and permit all others). The authentication order must be appropriate for the target environment. Authentication must be configured on all access interfaces connecting to LAN outlets or devices not located in the telecom room, wiring closets, or equipment rooms.
SRG-NET-000362-L2S-000021
1 Rule
The Juniper EX switch must be configured to enable Root Protection on STP switch ports connecting to access layer switches.
Low Severity
Spanning Tree Protocol (STP) does not provide any means for the network administrator to securely enforce the topology of the switched network. Any switch can be the root bridge in a network. However, a more optimal forwarding topology places the root bridge at a specific predetermined location. With the standard STP, any bridge in the network with a lower bridge ID takes the role of the root bridge. The administrator cannot enforce the position of the root bridge but can set the root bridge priority to zero in an effort to secure the root bridge position. The Root Protection feature provides a way to enforce the root bridge placement in the network. If the bridge receives superior STP Bridge Protocol Data Units (BPDUs) on a Root Protection-enabled interface, Root Protection ignores the superior BPDU and places the interface into block and a root-inconsistent state. To enforce the position of the root bridge it is imperative that Root Protection is enabled on all interfaces where the root bridge should never appear. Note: Although Loop Protection can be applied to all non-designated ports, JUEX-L2-000100 requires that Root Protection be applied to all user-facing access switch ports. Thus, Loop Protection must only be applied to all nondesignated ports that are not also user-facing access switch ports. Loop Protection and Root Protection cannot be applied to the same port. Additionally, note that configuring BPDU Protection and Root Protection on the same interface is supported because BPDU protection includes Root Protection.
SRG-NET-000362-L2S-000022
1 Rule
The Juniper EX switch must be configured to enable BPDU Protection on all user-facing or untrusted access switch ports.
Medium Severity
If a rogue switch is introduced into the topology and transmits a Bridge Protocol Data Unit (BPDU) with a lower bridge priority than the existing root bridge, it will become the new root bridge and cause a topology change, rendering the network in a suboptimal state. BPDU Protection allows network designers to enforce the STP domain borders and keep the active topology predictable. The devices behind interfaces that have BPDU Protection enabled are not able to influence the STP topology. At the reception of BPDUs, BPDU Protection disables the port and logs the condition.
SRG-NET-000362-L2S-000023
1 Rule
The Juniper EX switch must be configured to enable STP Loop Protection on all non-designated STP switch ports.
Medium Severity
The Spanning Tree Protocol (STP) Loop Protection feature provides additional protection against STP loops. An STP loop is created when an STP blocking port in a redundant topology erroneously transitions to the forwarding state. In its operation, STP relies on continuous reception and transmission of BPDUs based on the port role. The designated port transmits BPDUs, and the non-designated port receives BPDUs. When one of the ports in a physically redundant topology no longer receives BPDUs, the STP conceives that the topology is loop free. Eventually, the blocking port from the alternate or backup port becomes a designated port and moves to a forwarding state. This situation creates a loop. The loop protection feature makes additional checks. If BPDUs are not received on a non-designated port and loop protection is enabled, that port is moved into the STP loop-inconsistent blocking state.
SRG-NET-000362-L2S-000024
1 Rule
The Juniper EX switch must be configured not to forward unknown unicast traffic to access interfaces.
Medium Severity
Access layer switches use the Content Addressable Memory (CAM) table to direct traffic to specific interfaces based on the VLAN number and the destination MAC address of the frame. When a router has an Address Resolution Protocol (ARP) entry for a destination host and forwards it to the access layer switch and there is no entry corresponding to the frame's destination MAC address in the incoming VLAN, the frame will be sent to all forwarding interfaces within the respective VLAN, which causes flooding. Large amounts of flooded traffic can saturate low-bandwidth links, causing network performance issues or complete connectivity outage to the connected devices. Unknown unicast flooding has been a nagging problem in networks that have asymmetric routing and default timers. To mitigate the risk of a connectivity outage, the unknown unicast traffic must not be flooded to all access interfaces.
SRG-NET-000362-L2S-000025
1 Rule
The Juniper EX switch must be configured to enable DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources.
Medium Severity
In an enterprise network, devices under administrative control are trusted sources. These devices include the switches, routers, and servers in the network. Host interfaces and unknown DHCP servers are considered untrusted sources. An unknown DHCP server on the network on an untrusted interface is called a spurious DHCP server, any device (PC, Wireless Access Point) that is loaded with DHCP server enabled. The DHCP snooping feature determines whether traffic sources are trusted or untrusted. The potential exists for a spurious DHCP server to respond to DHCPDISCOVER messages before the real server has time to respond. DHCP snooping allows switches on the network to trust the interface a DHCP server is connected to and not trust the other interfaces. The DHCP snooping feature validates DHCP messages received from untrusted sources and filters out invalid messages as well as rate-limits DHCP traffic from trusted and untrusted sources. The DHCP snooping feature builds and maintains a binding database, which contains information about untrusted hosts with leased IP addresses, and it utilizes the database to validate subsequent requests from untrusted hosts. Other security features, such as IP Source Guard and Dynamic Address Resolution Protocol (ARP) Inspection (DAI), also use information stored in the DHCP snooping binding database. Hence, it is imperative that the DHCP snooping feature is enabled on all user-facing or untrusted VLANs.
SRG-NET-000362-L2S-000026
1 Rule
The Juniper EX switch must be configured to enable IP Source Guard on all user-facing or untrusted access VLANs.
Medium Severity
IP Source Guard provides source IP address filtering on an untrusted layer 2 interface to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature uses dynamic DHCP snooping and static IP source binding to match IP addresses to hosts on untrusted layer 2 access interfaces. Initially, all IP traffic on the protected interface is blocked except for DHCP packets. After a client receives an IP address from the DHCP server, or after static IP source binding is configured by the administrator, all traffic with that IP source address is permitted from that client. Traffic from other hosts is denied. This filtering limits a host's ability to attack the network by claiming a neighbor host's IP address.
SRG-NET-000362-L2S-000027
1 Rule
The Juniper EX switch must be configured to enable Dynamic Address Resolution Protocol (ARP) Inspection (DAI) on all user VLANs.
Medium Severity
DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and before forwarding the packet to the appropriate destination. Invalid ARP packets are dropped and logged. DAI determines the validity of an ARP packet based on valid IP-to-MAC address bindings stored in the DHCP snooping binding database. If the ARP packet is received on a trusted interface, the switch forwards the packet without any checks. On untrusted interfaces, the switch forwards the packet only if it is valid.
SRG-NET-000512-L2S-000001
1 Rule
The Juniper EX switch must be configured to enable Storm Control on all host-facing access interfaces.
Low Severity
A traffic storm occurs when packets flood a LAN, creating excessive traffic and degrading network performance. Traffic storm control prevents network disruption by suppressing ingress traffic when the number of packets reaches configured threshold levels. Traffic storm control monitors ingress traffic levels on a port and drops traffic when the number of packets reaches the configured threshold level during any one-second interval.
SRG-NET-000512-L2S-000002
1 Rule
The Juniper EX switch must be configured to enable IGMP or MLD Snooping on all VLANs.
Low Severity
IGMP and MLD snooping provides a way to constrain multicast traffic at layer 2. By monitoring the IGMP or MLD membership reports sent by hosts within a VLAN, the snooping application can set up layer 2 multicast forwarding tables to deliver specific multicast traffic only to interfaces connected to hosts interested in receiving the traffic, thereby significantly reducing the volume of multicast traffic that would otherwise flood the VLAN.
SRG-NET-000512-L2S-000003
1 Rule
If STP is used, the Juniper EX switch must be configured to implement Rapid STP, or Multiple STP, where VLANs span multiple switches with redundant links.
Medium Severity
Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent layer 2 loops when a broadcast domain spans multiple bridges and switches and when redundant links are provisioned to provide high availability in case of link failures. Convergence time can be significantly reduced using Rapid STP (802.1w) instead of STP (802.1d), resulting in improved availability. Rapid STP should be deployed by implementing either Rapid Spanning-Tree Protocol (RSTP) or Multiple Spanning-Tree Protocol (MSTP), the latter scales much better when there are many VLANs. In cases where VLANs do not span multiple switches, it is a best practice to not implement STP. Avoiding the use of STP will provide the most deterministic and highly available network topology. If STP is required, then review the switch configuration to verify that Rapid STP or Multiple STP has been implemented. RSTP and MSTP are similar, except MSTP is more granular, flexible, and scalable. RTSP and MSTP can be enabled simultaneously, but in general only one STP is configured.
SRG-NET-000512-L2S-000004
1 Rule
The Juniper EX switch must be configured to verify two-way connectivity on all interswitch trunked interfaces.
Medium Severity
In topologies where fiber optic interconnections are used, physical misconnections can occur that allow a link to appear to be up when there is a mismatched set of transmit/receive pairs. When such a physical misconfiguration occurs, protocols such as STP can cause network instability. OAM LFM and LAG are industry standard layer 2 protocols that can detect these physical misconfigurations by verifying that traffic is flowing bidirectionally between neighbors. Interfaces with OAM configured, and LAG interfaces, periodically transmit packets to neighbor devices. If the packets are not exchanged within a specific time frame, the link is flagged as unidirectional and the interface is shut down. OAM LFM and LAG require both connected devices to be configured.
SRG-NET-000512-L2S-000007
1 Rule
The Juniper EX switch must be configured to assign all disabled access interfaces to an unused VLAN.
Medium Severity
It is possible that a disabled access interface that is assigned to a user or management VLAN becomes enabled by accident or by an attacker and as a result gains access to that VLAN as a member.
SRG-NET-000512-L2S-000008
1 Rule
The Juniper EX switch must not be configured with VLANs used for L2 control traffic assigned to any host-facing access interface.
Medium Severity
In a switched Ethernet network, some protocols use L2 Protocol Data Units (PDU) to communicate in-band management or other control information. This control traffic is inappropriate for host-facing access interfaces because those devices are not part of the switching infrastructure. Juniper switches do not automatically carry this L2 control traffic in the default VLAN or automatically assign the default VLAN to all trunks, reducing the scope of potential misuse. Preventing host-facing access interfaces from participating in the L2 control traffic communications further reduces the risk of inadvertent (or malicious) interference.
SRG-NET-000512-L2S-000009
1 Rule
The Juniper EX switch must be configured to prune the default VLAN from all trunked interfaces that do not require it.
Medium Severity
All unassigned interfaces are placed into the default VLAN and devices connected to enabled, but unassigned interfaces can communicate within that VLAN. Although the default VLAN is not automatically assigned to any trunked interface, if the default VLAN must be trunked or a misconfigured trunk unintentionally includes the default VLAN, unauthorized devices connected to enabled but unassigned access interfaces could gain network connectivity beyond the local switch.
SRG-NET-000512-L2S-000010
1 Rule
The Juniper EX switch must not use the default VLAN for management traffic.
Medium Severity
By default, all unassigned interfaces are placed into the default VLAN and if used for management, could unintentionally expose sensitive traffic or protected resources to unauthorized devices.
SRG-NET-000512-L2S-000011
1 Rule
The Juniper EX switch must be configured to set all user-facing or untrusted ports as access interfaces.
Medium Severity
Configuring user-facing or untrusted interfaces as trunked may expose network traffic to an unauthorized, or unintended, connected endpoint. Access interfaces can belong to a single VLAN rather than the multiple VLANs supported by trunks, which limits potential exposure to a smaller subset of the total network traffic. Access interfaces also behave differently than trunked interfaces, especially with respect to control plane traffic. For example, access interfaces can be marked as "edge" for protocols like Rapid Spanning Tree (RSTP) or Multiple Spanning Tree (MSTP) where specific protections can be applied to prevent the switch from accepting Bridge Protocol Data Units (BPDU) from unauthorized sources and causing a network topology change or disruption. Additionally, network level protection mechanisms, like 802.1x or sticky-mac, are applied to access interfaces and these protection mechanisms help prevent unauthorized network access.
SRG-NET-000512-L2S-000012
1 Rule
The Juniper EX switch must not have a native VLAN ID assigned, or have a unique native VLAN ID, for all 802.1q trunk links.
Medium Severity
By default, Juniper switches do not assign a native VLAN to any trunked interface. Allowing trunked interfaces to accept untagged data packets may unintentionally expose VLANs to unauthorized devices that could result in network exploration, unauthorized resource access, or a DoS condition. If a network function requires a native VLAN it must be unique.
SRG-NET-000512-L2S-000013
1 Rule
The Juniper EX switch must not have any access interfaces assigned to a VLAN configured as native for any trunked interface.
Low Severity
Trunked interfaces without an assigned native VLAN do not accept untagged data packets. Allowing trunked interfaces to accept untagged data packets may unintentionally expose VLANs to unauthorized devices that could result in network exploration, unauthorized resource access, or a DoS condition. If a network function requires a native VLAN, and access interfaces are members of the assigned VLAN, authorized devices connected to those interfaces may gain unauthorized access to protected resources.
SRG-NET-000131-L2S-000014
1 Rule
The Juniper EX switch must be configured to disable non-essential capabilities.
High Severity
A compromised switch introduces risk to the entire network infrastructure as well as data resources that are accessible via the network. The perimeter defense has no oversight or control of attacks by malicious users within the network. Preventing network breaches from within is dependent on implementing a comprehensive defense-in-depth strategy, including securing each device connected to the network. This is accomplished by following and implementing all security guidance applicable for each node type. A fundamental step in securing each switch is to enable only the capabilities required for operation.