Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Documents
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
Enterprise Voice, Video, and Messaging Endpoint Security Requirements Guide
Enterprise Voice, Video, and Messaging Endpoint Security Requirements Guide
An XCCDF Benchmark
Details
Profiles
Items
Prose
46 rules organized in 46 groups
SRG-NET-000015
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to prevent the configuration or display of configuration settings without the use of a PIN or password.
Medium Severity
<VulnDiscussion>Many Enterprise Voice, Video, and Messaging Endpoints can set or display configuration settings in the instrument itself. This presents a risk if a user obtains information such as the IP addresses and URLs of system components. This obtained information could be used to facilitate an attack on the system. Therefore, these devices should be considered a target to be defended against such individuals that would collect voice network information for illicit purposes. To mitigate information gathering by the adversaries, measures must be taken to protect this information.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000015
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to register with an Enterprise Voice, Video, and Messaging Session Manager.
High Severity
<VulnDiscussion>For most VoIP systems, registration is the process of centrally recording the user ID, endpoint MAC address, service/policy profile with two-stage authentication prior to authorizing the establishment of the session and user service. The event of successful registration creates the session record immediately. VC systems register using a similar process with a gatekeeper. Without enforcing registration, an adversary could impersonate a legitimate device on the Voice Video network.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000018
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint PC port must be configured to maintain VLAN separation from the voice video VLAN, or be disabled.
Medium Severity
<VulnDiscussion>Virtualized networking is used to separate voice video traffic from other types of traffic, such as data, management, and other special types. VLANs provide segmentation at layer 2. Virtual Routing and Forwarding (VRF) provides segmentation at layer 3 and works with Multiprotocol Label Switching (MPLS) for enterprise and WAN environments. When VRF is used without MPLS, it is referred to as VRF lite. For Voice Video systems, subnets, VLANs, and VRFs are used to separate media and signaling streams from all other traffic.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000018
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to integrate into the implemented 802.1x network access control system.
Medium Severity
<VulnDiscussion>IEEE 802.1x is a protocol used to control access to LAN services via a network access switchport or wireless access point that requires a device or user to authenticate to the network element and become authorized by the authentication server before accessing the network. This standard is used to activate the network access switchport limiting traffic to a specific VLAN or install traffic filters. Implementing 802.1x port security on each access switchport denies all other MAC users, which eliminates the security risk of additional users attaching to a switch to bypass authentication. The hardware Enterprise Voice, Video, and Messaging Endpoint must be an 802.1x supplicant and integrate into the 802.1x access control system. When 802.1x is used, all devices connecting to the LAN are required to use 802.1x. MAC Authentication Bypass is permitted by the Enterprise Voice, Video, and Messaging Requirements Guide when the endpoint does not support 802.1x or required by mission continuity of operation requirements.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000018
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint PC port must be configured to connect to an 802.1x supplicant or the PC port must be disabled.
Medium Severity
<VulnDiscussion>IEEE 802.1x is a protocol used to control access to LAN services via a network access switchport or wireless access point that requires a device or user to authenticate to the network element and become authorized by the authentication server before accessing the network. This standard is used to activate the network access switchport limiting traffic to a specific VLAN or install traffic filters. Implementing 802.1x port security on each access switchport denies all other MAC users, which eliminates the security risk of additional users attaching to a switch to bypass authentication. The hardware Enterprise Voice, Video, and Messaging Endpoint must be an 802.1x supplicant and integrate into the 802.1x access control system. When 802.1x is used, all devices connecting to the LAN are required to use 802.1x. An Enterprise Voice, Video, and Messaging Endpoint with a PC port may break 802.1x LAN access control mechanisms when the network access switchport is authorized during the Enterprise Voice, Video, and Messaging Endpoint authentication to the network. This condition may permit devices connected to the PC port to access the LAN. The access switchport can be configured in one of the following modes: single-host, multi-host, or multi-domain. Single-host allows only one device to authenticate, and only packets from this devices MAC address will be allowed, dropping all other packets. Multi-host mode requires one host to authenticate but once this is done, all packets regardless of source MAC address will be allowed. For both the PC attached to the PC port and the Enterprise Voice, Video, and Messaging Endpoint to authenticate separately, multi-domain authentication on the access switchport must be configured. This divides the switchport into a data and a voice domain. In this case if more than one device attempts authorization on either the voice or the data domain of a port, the switchport goes into an error disable state. Disabling the PC port requires the network access switchports are configured with the appropriate VLAN for the VVoIP or VTC traffic and placing the disabled PC port traffic on the unused VLAN. MAC Address Bypass (MAB) is a possible mitigation for this vulnerability.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000018
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint not supporting 802.1x must be configured to use MAC Authentication Bypass (MAB) on the access switchport.
Medium Severity
<VulnDiscussion>IEEE 802.1x is a protocol used to control access to LAN services via a network access switchport or wireless access point that requires a device or user to authenticate to the network element and become authorized by the authentication server before accessing the network. This standard is used to activate the network access switchport limiting traffic to a specific VLAN or install traffic filters. Implementing 802.1x port security on each access switchport denies all other MAC users, which eliminates the security risk of additional users attaching to a switch to bypass authentication. The hardware Enterprise Voice, Video, and Messaging Endpoint must be an 802.1x supplicant and integrate into the 802.1x access control system. When 802.1x is used, all devices connecting to the LAN are required to use 802.1x. An Enterprise Voice, Video, and Messaging Endpoint with a PC port may break 802.1x LAN access control mechanisms when the network access switchport is authorized during the Enterprise Voice, Video, and Messaging Endpoint authentication to the network. This condition may permit devices connected to the PC port to access the LAN. Daisy chaining devices on a single LAN drop protected by 802.1x must be prohibited unless the PC port is an 802.1x authenticator and configured to work with an approved authentication server. Disabling the PC port requires the network access switchports are configured with the appropriate VLAN for the VVoIP or VTC traffic and placing the disabled PC port traffic on the unused VLAN. MAC Address Bypass (MAB) is a possible mitigation for this vulnerability.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000018
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to use a voice video VLAN, separate from all other VLANs.
Medium Severity
<VulnDiscussion>Virtualized networking is used to separate voice video traffic from other types of traffic, such as data, management, and other special types. VLANs provide segmentation at layer 2. Virtual Routing and Forwarding (VRF) provides segmentation at layer 3 and works with Multiprotocol Label Switching (MPLS) for enterprise and WAN environments. When VRF is used without MPLS, it is referred to as VRF lite. For Voice Video systems, subnets, VLANs, and VRFs are used to separate media and signaling streams from all other traffic.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000018
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to disable the Far End Camera Control feature if supported.
Medium Severity
<VulnDiscussion>Many VTC endpoints support Far End Camera Control (FECC). This feature uses H.281 protocol, which must be supported by both VTUs. Typically, this is only available during an active VTC session but could be available if the VTU is compromised or if a call is automatically answered. Allowing another conference attendee to take control of the camera can place the confidentiality of nonconference-related information at risk. FECC should be disabled to prevent the control of the near end camera by the far end unless required to satisfy validated mission requirements.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000029
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to apply 802.1Q VLAN tags to signaling and media traffic.
Medium Severity
<VulnDiscussion>When Enterprise Voice, Video, and Messaging Endpoints do not dynamically assign 802.1Q VLAN tags as data is created and combined, it is possible the VLAN tags will not correctly reflect the data type with which they are associated. VLAN tags are used as security attributes. These attributes are typically associated with signaling and media streams within the application and are used to enable the implementation of access control and flow control policies. Security labels for packets may include traffic flow information (e.g., source, destination, protocol combination), traffic classification based on QoS markings for preferred treatment, and VLAN identification. Virtualized networking is used to separate voice video traffic from other types of traffic, such as data, management, and other special types. VLANs provide segmentation at layer 2. Virtual Routing and Forwarding (VRF) provides segmentation at layer 3 and works with Multiprotocol Label Switching (MPLS) for enterprise and WAN environments. When VRF is used without MPLS, it is referred to as VRF lite. For Voice Video systems, subnets, VLANs, and VRFs are used to separate media and signaling streams from all other traffic.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000041
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to display the Standard Mandatory DOD Notice and Consent Banner before granting access to the network.
Medium Severity
<VulnDiscussion>Display of a standardized and approved use notification before granting access to the network ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. System use notifications are required only for access via logon interfaces with human users and are not required when such human interfaces do not exist. This requirement applies to network elements that have the concept of a user account and have the logon function residing on the network element. The banner must be formatted in accordance with DTM-08-060. Use the following verbiage for network elements that can accommodate banners of 1300 characters: "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details." Use the following verbiage for operating systems that have severe limitations on the number of characters that can be displayed in the banner: "I've read & consent to terms in IS user agreem't."</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000042
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to retain the Standard Mandatory DOD Notice and Consent Banner on the screen until users acknowledge the usage conditions and take explicit actions to log on for further access.
Medium Severity
<VulnDiscussion>The banner must be acknowledged by the user prior to allowing the user access to the network. This provides assurance that the user has seen the message and accepted the conditions for access. If the consent banner is not acknowledged by the user, DOD will not be in compliance with system use notifications required by law. To establish acceptance of the application usage policy, a click-through banner at application logon is required. The network element must prevent further activity until the user executes a positive action to manifest agreement by clicking on a box indicating "OK". This requirement applies to network elements that have the concept of a user account and have the logon function residing on the network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000048
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must notify the user, upon successful logon (access) to the network element, of the date and time of the last logon (access).
Medium Severity
<VulnDiscussion>Users need to be aware of activity that occurs regarding their account. Providing users with information regarding the date and time of their last successful login allows the user to determine if any unauthorized activity has occurred and gives them an opportunity to notify administrators. This applies to network elements that have the concept of a user account and have the login function residing on the network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000049
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must notify the user, upon successful logon (access), of the number of unsuccessful logon (access) attempts since the last successful logon (access).
Medium Severity
<VulnDiscussion>Users need to be aware of activity that occurs regarding their account. Providing users with information regarding the number of unsuccessful attempts that were made to login to their account allows the user to determine if any unauthorized activity has occurred and gives them an opportunity to notify administrators. This applies to network elements that have the concept of a user account and have the login function residing on the network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000053
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to limit the number of concurrent sessions to an organizationally defined number.
Medium Severity
<VulnDiscussion>Enterprise Voice, Video, and Messaging Endpoint management includes the ability to control the number of user sessions and limiting the number of allowed user sessions helps limit risk related to DoS attacks. Enterprise Voice, Video, and Messaging Endpoint sessions occur peer-to-peer for media streams and client-server with session managers. For those endpoints that conference together multiple streams, the limit may be increased according to policy but a limit must still exist.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000074
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to produce session (call detail) records containing what type of connection occurred.
Medium Severity
<VulnDiscussion>Session records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing session records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing session records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate session records. Session record content that may be necessary to satisfy this requirement includes, for example, type of connection, connection origination, time stamps, outcome, user identities, and user identifiers. Additionally, an adversary must not be able to modify or delete session records. Detailed records are typically produced by the session manager but can be augmented by nontelephone endpoint records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000075
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to produce session (call detail) records containing when (date and time) the connection occurred.
Medium Severity
<VulnDiscussion>Session records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing session records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing session records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate session records. Session record content that may be necessary to satisfy this requirement includes, for example, type of connection, connection origination, time stamps, outcome, user identities, and user identifiers. Additionally, an adversary must not be able to modify or delete session records. Detailed records are typically produced by the session manager but can be augmented by nontelephone endpoint records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000076
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to produce session (call detail) records containing where the connection occurred.
Medium Severity
<VulnDiscussion>Session records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing session records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing session records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate session records. Session record content that may be necessary to satisfy this requirement includes, for example, type of connection, connection origination, time stamps, outcome, user identities, and user identifiers. Additionally, an adversary must not be able to modify or delete session records. Detailed records are typically produced by the session manager but can be augmented by nontelephone endpoint records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000077
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to produce session (call detail) records containing the source of the connection.
Medium Severity
<VulnDiscussion>Session records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing session records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing session records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate session records. Session record content that may be necessary to satisfy this requirement includes, for example, type of connection, connection origination, time stamps, outcome, user identities, and user identifiers. Additionally, an adversary must not be able to modify or delete session records. Detailed records are typically produced by the session manager but can be augmented by nontelephone endpoint records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000078
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to produce session (call detail) records containing the outcome of the connection.
Medium Severity
<VulnDiscussion>Session records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing session records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing session records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate session records. Session record content that may be necessary to satisfy this requirement includes, for example, type of connection, connection origination, time stamps, outcome, user identities, and user identifiers. Additionally, an adversary must not be able to modify or delete session records. Detailed records are typically produced by the session manager but can be augmented by nontelephone endpoint records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000079
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to produce session (call detail) records containing the identity of all users.
Medium Severity
<VulnDiscussion>Without information that establishes the identity of the subjects (i.e., users or processes acting on behalf of users) associated with the events, security personnel cannot determine responsibility for the potentially harmful event. Audit records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing audit records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing audit records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate audit records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000113
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to provide session (call detail) record generation capability.
Medium Severity
<VulnDiscussion>Session records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing session records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing session records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate session records. Session records for Voice Video systems are generally handled in a similar fashion to audit records for other systems and are used for billing, usage analysis, and record support for actions taken. Detailed records are typically produced by the session manager but can be augmented by nontelephone endpoint records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000131
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to disable or remove nonessential capabilities.
Medium Severity
<VulnDiscussion>It is detrimental for Enterprise Voice, Video, and Messaging Endpoints when unnecessary features are enabled by default. Often these features are enabled by default with functionality exceeding requirements or mission objectives. These unnecessary capabilities or services are often overlooked and therefore may remain unsecured. They increase the risk to the platform by providing additional attack vectors. Network elements are capable of providing a wide variety of functions and services. Some of the functions and services, provided by default, may not be necessary to support essential organizational operations (e.g., key missions, functions).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000132
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to only use ports, protocols, and services allowed per the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL) and Vulnerability Assessments (VAs).
High Severity
<VulnDiscussion>In order to prevent unauthorized connection of devices, unauthorized transfer of information, or unauthorized tunneling (i.e., embedding of data types within data types), organizations must disable or restrict unused or unnecessary physical and logical ports/protocols on information systems. Network elements are capable of providing a wide variety of functions and services. Some of the functions and services provided by default may not be necessary to support essential organizational operations. Additionally, it is sometimes convenient to provide multiple services from a single component (e.g., VPN and IPS); however, doing so increases risk over limiting the services provided by any one component. To support the requirements and principles of least functionality, the network element must support the organizational requirements providing only essential capabilities and limiting the use of ports, protocols, and/or services to only those required, authorized, and approved to conduct official business or to address authorized quality of life issues.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000138
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to uniquely identify participating users.
High Severity
<VulnDiscussion>To ensure accountability and prevent unauthenticated access, users must be identified to prevent potential misuse and compromise of the system. The Enterprise Voice, Video, and Messaging Endpoint must display the source of an incoming call and the participant's identity to aid the user in deciding whether to answer a call. The information potentially at risk is that which can be seen in the physical area of the Enterprise Voice, Video, and Messaging Endpoint or carried by the conference in which it is participating. This does not apply to authentication for the purpose of configuring the device itself (i.e., device management).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000140
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must use multifactor authentication for network access to nonprivileged (nonadmin) accounts.
Medium Severity
<VulnDiscussion>To ensure accountability and prevent unauthenticated access, nonprivileged users must use multifactor authentication to prevent potential misuse and compromise of the system. Multifactor authentication is implemented most often with software type endpoints, as this can be implemented at the operating system level. More recent advances in hardware may allow implementation at the hardware endpoint. Multifactor authentication uses two or more factors to achieve authentication. Factors include: (i) Something you know (e.g., password/PIN); (ii) Something you have (e.g., cryptographic identification device, token); or (iii) Something you are (e.g., biometric). The DOD CAC with DOD-approved PKI is an example of multifactor authentication.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000147
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to implement replay-resistant authentication mechanisms for network access.
Medium Severity
<VulnDiscussion>A replay attack may enable an unauthorized user to gain access to the application. Authentication sessions between the authenticator and the application validating the user credentials must not be vulnerable to a replay attack. An authentication process resists replay attacks if it is impractical to achieve a successful authentication by recording and replaying a previous authentication message. A nonprivileged account is any operating system account with authorizations of a nonprivileged user. Techniques used to address this include protocols using nonces (e.g., numbers generated for a specific one time use) or challenges (e.g., TLS, WS_Security). Additional techniques include time-synchronous or challenge-response one-time authenticators. This requirement only applies to components where this is specific to the function of the device or has the concept of an organizational user (e.g., VPN, proxy capability). This does not apply to authentication for the purpose of configuring the device itself (i.e., device management).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000213
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to terminate all network connections associated with a communications session at the end of the session.
High Severity
<VulnDiscussion>Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, and de-allocating networking assignments at the application level if multiple application sessions are using a single, operating system level network connection. This requirement applies to any network element that tracks individual sessions (e.g., stateful inspection firewall, ALG, or VPN).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000230
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to use FIPS-validated SHA-2 or higher to protect the authenticity of communications sessions.
Medium Severity
<VulnDiscussion>Authenticity protection provides protection against man-in-the-middle attacks/session hijacking and the insertion of false information into sessions. Although allowed by SP800-131Ar2 for some applications, SHA-1 is considered a compromised hashing standard and is being phased out of use by industry and government standards. Unless required for legacy use, DOD systems should not be configured to use SHA-1 for integrity of remote access sessions. This requirement focuses on communications protection for the application session rather than for the network packet and establishes grounds for confidence at both ends of communications sessions in ongoing identities of other parties and in the validity of information transmitted. Depending on the required degree of confidentiality and integrity, web services/SOA will require the use of mutual authentication (two-way/bidirectional). This requirement applies only to network elements that act as an intermediary for individual sessions (e.g., proxy, ALG, or SSL VPN).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000236
1 Rule
<GroupDescription></GroupDescription>
In the event of a device failure, Enterprise Voice, Video, and Messaging Endpoints must preserve any information necessary to determine cause of failure and return to operations with least disruption to service.
Medium Severity
<VulnDiscussion>Failure in a known state can address safety or security in accordance with the mission needs of the organization. Failure to a known secure state helps prevent a loss of confidentiality, integrity, or availability in the event of a failure of the information system or a component of the system. Preserving network element state information helps to facilitate network element restart and return to the operational mode of the organization with less disruption to mission-essential processes.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000334
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must offload audit records onto a different system or media than the system being audited.
Medium Severity
<VulnDiscussion>Information stored in one location is vulnerable to accidental or incidental deletion or alteration. Offloading is a common process in information systems with limited audit storage capacity. Audit records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing audit records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing audit records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that support audit records must support offloading.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000352
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to use cryptographic algorithms approved by NSA to protect NSS when transporting classified traffic across an unclassified network.
Medium Severity
<VulnDiscussion>Use of weak or untested encryption algorithms undermines the purposes of using encryption to protect data. NIST cryptographic algorithms are approved by NSA to protect NSS. Based on an analysis of the impact of quantum computing, cryptographic algorithms specified by CNSSP-15 and approved for use in products in the CSfC program have been changed to more stringent protocols and configured with increased bit sizes and other secure characteristics to protect against quantum computing threats. The Commercial National Security Algorithm Suite (CNSA Suite) replaces Suite B.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000353
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must provide an explicit indication of current participants in all Videoconference (VC)-based and IP-based online meetings and conferences.
Medium Severity
<VulnDiscussion>Providing an explicit indication of current participants in teleconferences helps to prevent unauthorized individuals from participating in collaborative teleconference sessions without the explicit knowledge of other participants. Teleconferences allow groups of users to collaborate and exchange information. Without knowing who is in attendance, information could be compromised. Network elements that provide a teleconference capability must provide a clear indication of who is attending the meeting, thus providing all attendees with the capability to clearly identify users who are in attendance.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000371
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to use FIPS-compliant algorithms for network traffic.
High Severity
<VulnDiscussion>Without protection of the transmitted information, confidentiality and integrity may be compromised as unprotected communications can be intercepted and either read or altered. TLS can be used to secure SIP and SCCP signaling by configuring the session manager in a secure mode. DOD-to-DOD voice communications are generally considered to contain sensitive information and therefore DOD voice and data traffic crossing the unclassified DISN must be encrypted. Cryptographic mechanisms such as Media Access Control Security (MACsec) implemented to protect information include cryptographic hash functions that have common application in digital signatures, checksums, and message authentication codes.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000400
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint, when using passwords or PINs for authentication or authorization, must be configured to cryptographically protect the PIN or password.
High Severity
<VulnDiscussion>Passwords need to be protected at all times and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. This does not apply to authentication for the purpose of configuring the device itself (management).</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000503
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must generate audit records when successful/unsuccessful logon attempts occur.
Medium Severity
<VulnDiscussion>Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident, or identify those responsible for one. Audit records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing audit records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing audit records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate audit records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000504
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must generate audit records for privileged activities or other system-level access.
Medium Severity
<VulnDiscussion>Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident, or identify those responsible for one. Audit records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing audit records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing audit records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate audit records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000505
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must generate audit records showing starting and ending time for user access to the system.
Medium Severity
<VulnDiscussion>Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident, or identify those responsible for one. Audit records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing audit records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing audit records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that communicate beyond these defined environments must generate audit records.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000511
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must, at a minimum, offload interconnected systems in real-time and offload standalone systems weekly.
Medium Severity
<VulnDiscussion>Information stored in one location is vulnerable to accidental or incidental deletion or alteration. Offloading is a common process in information systems with limited audit storage capacity. Audit records are commonly produced by session management and border elements. Many Enterprise Voice, Video, and Messaging Endpoints are not capable of providing audit records and instead rely on session management and border elements. Enterprise Voice, Video, and Messaging Endpoints capable of producing audit records provide supplemental confirmation of monitored events. Enterprise Voice, Video, and Messaging Endpoints that support audit records must support offloading.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured in accordance with the security configuration settings based on DOD security configuration or implementation guidance, including STIGs, NSA configuration guides, CTOs, and DTMs.
Medium Severity
<VulnDiscussion>Configuring the network element to implement organization-wide security implementation guides and security checklists ensures compliance with federal standards and establishes a common security baseline across DOD that reflects the most restrictive security posture consistent with operational requirements. Configuration settings are the set of parameters that can be changed that affect the security posture and/or functionality of the network element. Security-related parameters are those parameters impacting the security state of the network element, including the parameters required to satisfy other security control requirements. For the network element, security-related parameters include settings for network traffic management configurations.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured with a firmware release supported by the vendor.
High Severity
<VulnDiscussion>Operating a device with outdated firmware may leave the device with unmitigated security vulnerabilities. Vendors routinely update and patch firmware to address vulnerabilities. Operating with current supported firmware mitigates the vulnerabilities known by the vendor.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to dynamically implement configuration file changes.
Medium Severity
<VulnDiscussion>Configuration management includes the management of security features and assurances through control of changes made to device hardware, software, and firmware throughout the life cycle of a product. Secure configuration management relies on performance and functional attributes of products to determine the appropriate security features and assurances used to measure a system configuration state. When configuration changes are made, it is critical for those changes to be implemented by the Enterprise Voice, Video, and Messaging Endpoint as quickly as possible. This ensures that Enterprise Voice, Video, and Messaging Endpoints communicate using the correct address books, session managers, gateways, and border elements.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000512
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must be configured to disable any auto answer features.
Medium Severity
<VulnDiscussion>An Enterprise Voice, Video, and Messaging Endpoint set to automatically answer a call with audio or video capabilities enabled risks transmitting information not intended for the caller. In the event an Enterprise Voice, Video, and Messaging Endpoint automatically answered a call during a classified meeting or discussion, potentially sensitive or classified information could be transmitted. The auto-answer feature must not be activated by a user unless the feature is required to satisfy mission requirements.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000518
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must provide a logout capability for user-initiated communications sessions.
Medium Severity
<VulnDiscussion>If a user cannot explicitly end a session, the session may remain open and be exploited by an attacker; this is referred to as a zombie session. However, for some types of interactive sessions including, for example, remote login, information systems typically send logout messages as final messages prior to terminating sessions. This applies to network elements that have the concept of a user account and have the login function residing on the network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000519
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must display an explicit logout message to users indicating the reliable termination of communications sessions.
Medium Severity
<VulnDiscussion>If a user cannot explicitly end a session, the session may remain open and be exploited by an attacker; this is referred to as a zombie session. Users need to be aware of whether or not the session has been terminated. Logout messages for access, for example, can be displayed after authenticated sessions have been terminated. However, for some types of interactive sessions including, for example, remote login, information systems typically send logout messages as final messages prior to terminating sessions. This applies to network elements that have the concept of a user account and have the login function residing on the network element.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000522
1 Rule
<GroupDescription></GroupDescription>
For accounts using password or PINs for authentication, the Enterprise Voice, Video, and Messaging Endpoint must store only cryptographic representations of passwords.
Medium Severity
<VulnDiscussion>If passwords and PINs are not encrypted when stored, they may be read if the storage location is compromised. Note that DOD requires the use two-factor, CAC-enabled authentication and the use of passwords incurs a permanent finding. Passwords should be used only in limited situations. Examples of situations where a user ID and password might be used include: - When the user does not use a CAC and is not a current DOD employee, member of the military, or DOD contractor. - When a user has been officially designated as temporarily unable to present a CAC for some reason (lost, damaged, not yet issued, broken card reader) (i.e., Temporary Exception User) and to satisfy urgent organizational needs must be temporarily permitted to use user ID/password authentication until the problem with CAC use has been remedied. - When the application is publicly available and/or hosting publicly releasable data requiring some degree of need-to-know protection. If the password is already encrypted and not a plaintext password, this meets this requirement. Implementation of this requirement requires configuration of FIPS-approved cipher block algorithm and block cipher modes for encryption. This method uses a one-way hashing encryption algorithm with a salt value to validate a user's password without having to store the actual password. Performance and time required to access are factors that must be considered, and the one-way hash is the most feasible means of securing the password and providing an acceptable measure of password security. Verify the user knows a password is performed using a password verifier. In its simplest form, a password verifier is a computational function that is capable of creating a hash of a password and determining if the value provided by the user matches the hash. A more secure version of verifying a user knowing a password is to store the result of an iterating hash function and a large random salt value as follows: H0 = H(pwd, H(salt)) Hn = H(Hn-1,H(salt)) In the above, "n" is a cryptographically strong random [*3] number. "Hn" is stored along with the salt. When the application wishes to verify that the user knows a password, it simply repeats the process and compares "Hn" with the stored "Hn". A salt is essentially a fixed-length cryptographically strong random value. Another method is using a keyed hash message authentication code (HMAC). HMAC calculates a message authentication code via a cryptographic hash function used in conjunction with an encryption key. The key must be protected as with any private key. This requirement applies to all accounts including authentication server; Authentication, Authorization, and Accounting (AAA), and local accounts, including the root account, and the account of last resort.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>
SRG-NET-000530
1 Rule
<GroupDescription></GroupDescription>
The Enterprise Voice, Video, and Messaging Endpoint must prohibit client negotiation to TLS 1.1, TLS 1.0, SSL 2.0, or SSL 3.0.
High Severity
<VulnDiscussion>Using older unauthorized versions or incorrectly configuring protocol negotiation makes the gateway vulnerable to known and unknown attacks that exploit vulnerabilities in this protocol. This requirement applies to TLS gateways (also known as SSL gateways), web servers, and web applications. Application protocols such as HTTPS and DNSSEC use TLS as the underlying security protocol and thus are in scope for this requirement. NIST SP 800-52 provides guidance for client negotiation on either DOD-only or public-facing servers.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>