Skip to content
ATO Pathways
  Log In

Arista MLS EOS 4.2x L2S Security Technical Implementation Guide

Rules, Groups, and Values defined within the XCCDF Benchmark

  • The Arista MLS layer 2 switch must have IGMP or MLD Snooping configured on all VLANs.

    <VulnDiscussion>IGMP and MLD snooping provides a way to constrain multicast traffic at Layer 2. By monitoring the IGMP or MLD membership repo...
    Rule Low Severity
    Show

  • SRG-NET-000512-L2S-000003

    <GroupDescription></GroupDescription>
    Group
    Show

  • SRG-NET-000193-L2S-000020

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must be configured for Storm Control to limit the effects of packet flooding types of denial-of-service (DoS) attacks.

    &lt;VulnDiscussion&gt;Denial of service is a condition when a resource is not available for legitimate users. Packet flooding distributed DOS (DDoS...
    Rule Medium Severity
    Show

  • SRG-NET-000362-L2S-000021

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS switch must have Root Guard enabled on all switch ports connecting to access layer switches and hosts.

    &lt;VulnDiscussion&gt;Spanning Tree Protocol (STP) does not provide any means for the network administrator to securely enforce the topology of the...
    Rule Low Severity
    Show

  • SRG-NET-000362-L2S-000022

    <GroupDescription></GroupDescription>
    Group
    Show

  • SRG-NET-000512-L2S-000002

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have BPDU Guard enabled on all switch ports connecting to access layer switches and hosts.

    &lt;VulnDiscussion&gt;If a rogue switch is introduced into the topology and transmits a Bridge Protocol Data Unit (BPDU) with a lower bridge priori...
    Rule Medium Severity
    Show

  • SRG-NET-000362-L2S-000023

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS switch must have STP Loop Guard enabled on all nondesignated STP switch ports.

    &lt;VulnDiscussion&gt;The Spanning Tree Protocol (STP) loop guard feature provides additional protection against STP loops. An STP loop is created ...
    Rule Medium Severity
    Show

  • SRG-NET-000362-L2S-000025

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources.

    &lt;VulnDiscussion&gt;In an enterprise network, devices under administrative control are trusted sources. These devices include the switches, route...
    Rule Medium Severity
    Show

  • SRG-NET-000362-L2S-000026

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports.

    &lt;VulnDiscussion&gt;IP Source Guard (IPSG) provides source IP address filtering on a layer 2 port to prevent a malicious host from impersonating ...
    Rule Medium Severity
    Show

  • SRG-NET-000362-L2S-000027

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have Dynamic Address Resolution Protocol (ARP) Inspection (DAI) enabled on all user VLANs.

    &lt;VulnDiscussion&gt;DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC addre...
    Rule Medium Severity
    Show

  • The Arista MLS layer 2 Arista MLS switch must implement Rapid STP where VLANs span multiple switches with redundant links.

    &lt;VulnDiscussion&gt;Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent layer 2 loops when a broadcast domain spans mu...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000004

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must enable Unidirectional Link Detection (UDLD) to protect against one-way connections.

    &lt;VulnDiscussion&gt;In topologies where fiber optic interconnections are used, physical misconnections can occur that allow a link to appear to b...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000005

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have all trunk links enabled statically.

    &lt;VulnDiscussion&gt;When trunk negotiation is enabled via Dynamic Trunk Protocol (DTP), considerable time can be spent negotiating trunk settings...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000007

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have all disabled switch ports assigned to an unused VLAN.

    &lt;VulnDiscussion&gt;It is possible that a disabled port that is assigned to a user or management VLAN becomes enabled by accident or by an attack...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000008

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must not have the default VLAN assigned to any host-facing switch ports.

    &lt;VulnDiscussion&gt;In a VLAN-based network, switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with other ne...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000009

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have the default VLAN pruned from all trunk ports that do not require it.

    &lt;VulnDiscussion&gt;The default VLAN (i.e., VLAN 1) is a special VLAN used for control plane traffic such as Spanning-Tree Protocol (STP), Dynami...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000010

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must not use the default VLAN for management traffic.

    &lt;VulnDiscussion&gt;Switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with directly connected switches using...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000011

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have all user-facing or untrusted ports configured as access switch ports.

    &lt;VulnDiscussion&gt;Double encapsulation can be initiated by an attacker who has access to a switch port belonging to the native VLAN of the trun...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000012

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must have the native VLAN assigned to an ID other than the default VLAN for all 802.1q trunk links.

    &lt;VulnDiscussion&gt;VLAN hopping can be initiated by an attacker who has access to a switch port belonging to the same VLAN as the native VLAN of...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000013

    <GroupDescription></GroupDescription>
    Group
    Show

  • The Arista MLS layer 2 switch must not have any switch ports assigned to the native VLAN.

    &lt;VulnDiscussion&gt;Double encapsulation can be initiated by an attacker who has access to a switch port belonging to the native VLAN of the trun...
    Rule Low Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules