Skip to content
ATO Pathways
Log In
Overview
Search
Catalogs
SCAP
OSCAL
Catalogs
Profiles
Resources
Documents
Publishers
References
Knowledge Base
Platform Documentation
Compliance Dictionary
Platform Changelog
About
Catalogs
XCCDF
VMware NSX-T Distributed Firewall Security Technical Implementation Guide
VMware NSX-T Distributed Firewall Security Technical Implementation Guide
An XCCDF Benchmark
Details
Profiles
Items
Prose
File Metadata
7 rules organized in 7 groups
SRG-NET-000192-FW-000029
1 Rule
The NSX-T Distributed Firewall must block outbound traffic containing denial-of-service (DoS) attacks to protect against the use of internal information systems to launch any DoS attacks against other networks or endpoints.
Medium Severity
DoS attacks can take multiple forms but have the common objective of overloading or blocking a network or host to deny or seriously degrade performance. If the network does not provide safeguards against DoS attacks, network resources will be unavailable to users. Installation of a firewall at key boundaries in the architecture mitigates the risk of DoS attacks. These attacks can be detected by matching observed communications traffic with patterns of known attacks and monitoring for anomalies in traffic volume/type. The firewall must include protection against DoS attacks that originate from inside the enclave that can affect either internal or external systems. These attacks may use legitimate or rogue endpoints from inside the enclave. These attacks can be simple "floods" of traffic to saturate circuits or devices, malware that consumes CPU and memory on a device or causes it to crash, or a configuration issue that disables or impairs the proper function of a device. For example, an accidental or deliberate misconfiguration of a routing table can misdirect traffic for multiple networks. Satisfies: SRG-NET-000192-FW-000029, SRG-NET-000193-FW-000030
SRG-NET-000202-FW-000039
1 Rule
The NSX-T Distributed Firewall must deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception).
Low Severity
To prevent malicious or accidental leakage of traffic, organizations must implement a deny-by-default security posture at the network perimeter. Such rulesets prevent many malicious exploits or accidental leakage by restricting the traffic to only known sources and only those ports, protocols, or services that are permitted and operationally necessary. As a managed boundary interface, the firewall must block all inbound and outbound network traffic unless a filter is installed to explicitly allow it. The allow filters must comply with the Ports, Protocols, and Services Management (PPSM) Category Assurance List (CAL) and Vulnerability Assessment (VA). Satisfies: SRG-NET-000202-FW-000039, SRG-NET-000236-FW-000027, SRG-NET-000235-FW-000133
SRG-NET-000333-FW-000014
1 Rule
The NSX-T Distributed Firewall must be configured to send traffic log entries to a central audit server for management and configuration of the traffic log entries.
Medium Severity
Without the ability to centrally manage the content captured in the traffic log entries, identification, troubleshooting, and correlation of suspicious behavior would be difficult and could lead to a delayed or incomplete analysis of an ongoing attack. The DoD requires centralized management of all network component audit record content. Network components requiring centralized traffic log management must have the ability to support centralized management. The content captured in traffic log entries must be managed from a central location (necessitating automation). Centralized management of traffic log records and logs provides for efficiency in maintenance and management of records, as well as the backup and archiving of those records. Ensure at least one syslog server is configured on the firewall. If the product inherently has the ability to store log records locally, the local log must also be secured. However, this requirement is not met since it calls for a use of a central audit server.
SRG-NET-000362-FW-000028
1 Rule
The NSX-T Distributed Firewall must employ filters that prevent or limit the effects of all types of commonly known denial-of-service (DoS) attacks, including flooding, packet sweeps, and unauthorized port scanning.
Medium Severity
Not configuring a key boundary security protection device, such as the firewall, against commonly known attacks is an immediate threat to the protected enclave because they are easily implemented by those with little skill. Directions for the attack are obtainable on the internet and in hacker groups. Without filtering enabled for these attacks, the firewall will allow these attacks beyond the protected boundary. Configure the perimeter and internal boundary firewall to guard against the three general methods of well-known DoS attacks: Flooding attacks, protocol sweeping attacks, and unauthorized port scanning. Flood attacks occur when the host receives too much traffic to buffer and slows down or crashes. Popular flood attacks include ICMP flood and SYN flood. A TCP flood attack of SYN packets initiating connection requests can overwhelm the device until it can no longer process legitimate connection requests, resulting in denial of service. An ICMP flood can overload the device with so many echo requests (ping requests) that it expends all its resources responding and can no longer process valid network traffic, also resulting in denial of service. An attacker might use session table floods and SYN-ACK-ACK proxy floods to fill up the session table of a host. In an IP address sweep attack, an attacker sends ICMP echo requests (pings) to multiple destination addresses. If a target host replies, the reply reveals the target's IP address to the attacker. In a TCP sweep attack, an attacker sends TCP SYN packets to the target device as part of the TCP handshake. If the device responds to those packets, the attacker gets an indication that a port in the target device is open, which makes the port vulnerable to attack. In a UDP sweep attack, an attacker sends UDP packets to the target device. If the device responds to those packets, the attacker gets an indication that a port in the target device is open, which makes the port vulnerable to attack. In a port scanning attack, an unauthorized application is used to scan the host devices for available services and open ports for subsequent use in an attack. This type of scanning can be used as a DoS attack when the probing packets are sent excessively.
SRG-NET-000392-FW-000042
1 Rule
The NSX-T Distributed Firewall must configure SpoofGuard to block outbound IP packets that contain illegitimate packet attributes.
Medium Severity
SpoofGuard helps prevent a form of malicious attack called "web spoofing" or "phishing." A SpoofGuard policy blocks traffic determined to be spoofed. SpoofGuard is a tool that is designed to prevent virtual machines in your environment from sending traffic with an IP address from which it is not authorized to send traffic. In the instance that a virtual machine's IP address does not match the IP address on the corresponding logical port and segment address binding in SpoofGuard, the virtual machine's vNIC is prevented from accessing the network entirely. SpoofGuard can be configured at the port or segment level. There are several reasons SpoofGuard might be used in your environment, but for the distributed firewall it will guarantee that rules will not be inadvertently (or deliberately) bypassed. For DFW rules created utilizing IP sets as sources or destinations, the possibility always exists that a virtual machine could have its IP address forged in the packet header, thereby bypassing the rules in question.
SRG-NET-000019-FW-000003
1 Rule
The NSX-T Distributed Firewall must verify time-based firewall rules.
Medium Severity
With time windows, security administrators can restrict traffic from a source or to a destination, for a specific time period. Time windows apply to a firewall policy section, and all the rules in it. Each firewall policy section can have one time window. The same time window can be applied to more than one policy section. If you want the same rule applied on different days or different times for different sites, you must create more than one policy section. Time-based rules are available for distributed and gateway firewalls on both ESXi and KVM hosts. If time windows are not verified and periodically checked, a malicious actor could create time windows to effectively disable rules while not being obvious to firewall administrators.
SRG-NET-000074-FW-000009
1 Rule
The NSX-T Distributed Firewall must generate traffic log entries containing information to establish the details of the event.
Medium Severity
Without sufficient information to analyze the event, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Audit event content that must be included to satisfy this requirement includes, for example, time stamps, source and destination addresses, user/process identifiers, event descriptions, success/fail indications, filenames involved, and access control or flow control rules invoked. The NSX-T Distributed Firewall must also generate traffic log records when traffic is denied, restricted, or discarded as well as when attempts are made to send packets between security zones that are not authorized to communicate. Satisfies: SRG-NET-000074-FW-000009, SRG-NET-000075-FW-000010, SRG-NET-000076-FW-000011, SRG-NET-000077-FW-000012, SRG-NET-000078-FW-000013, SRG-NET-000492-FW-000006, SRG-NET-000493-FW-000007