Skip to content
Log In

I - Mission Critical Public

Rules and Groups employed by this XCCDF Profile

  • SRG-NET-000512-L2S-000002

    Group
    Show

  • The Dell OS10 Switch must have IGMP or MLD Snooping configured on all VLANs

    IGMP and MLD snooping provides a way to constrain multicast traffic at Layer 2. By monitoring the IGMP or MLD membership reports sent by hosts within a VLAN, the snooping application can set up Lay...
    Rule Low Severity
    Show

  • SRG-NET-000512-L2S-000003

    Group
    Show

  • The Dell OS10 Switch must implement Rapid Spanning Tree Protocol (STP) where VLANs span multiple switches with redundant links.

    STP is implemented on bridges and switches to prevent Layer 2 loops when a broadcast domain spans multiple bridges and switches and when redundant links are provisioned to provide high availability...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000004

    Group
    Show

  • The Dell OS10 Switch must enable Far-End Failure Detection (FEFD) to protect against one-way connections.

    In topologies where fiber-optic interconnections are used, physical misconnections can occur that allow a link to appear to be up when there is a mismatched set of transmit/receive pairs. When such...
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000007

    Group
    Show

  • The Dell OS10 Switch must have all disabled switch ports assigned to an unused VLAN.

    It is possible that a disabled port that is assigned to a user or management VLAN becomes enabled by accident or by an attacker and as a result gains access to that VLAN as a member.
    Rule Medium Severity
    Show

  • SRG-NET-000512-L2S-000008

    Group
    Show

  • The Dell OS10 Switch must not have the default VLAN assigned to any host-facing switch ports.

    In a VLAN-based network, switches use the default VLAN (i.e., VLAN 1) for in-band management and to communicate with other networking devices using Spanning-Tree Protocol (STP), Dynamic Trunking Pr...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules