Skip to content
ATO Pathways
  Log In

Australian Cyber Security Centre (ACSC) ISM Official

Rules and Groups employed by this XCCDF Profile

  • Disable telnet Service

    Make sure that the activation of the <code>telnet</code> service on system boot is disabled. The <code>telnet</code> socket can be disabled with t...
    Rule High Severity
    Show

  • Proxy Server

    A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow throug...
    Group
    Show

  • Disable Squid if Possible

    If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.
    Group
    Show

  • Uninstall squid Package

    The squid package can be removed with the following command: 
     $ sudo yum erase squid
    Rule Unknown Severity
    Show

  • Disable Squid

    The squid service can be disabled with the following command: 
    $ sudo systemctl mask --now squid.service
    Rule Unknown Severity
    Show

  • SNMP Server

    The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP w...
    Group
    Show

  • Disable SNMP Server if Possible

    The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but...
    Group
    Show

  • Configure SNMP Server if Necessary

    If it is necessary to run the snmpd agent on the system, some best practices should be followed to minimize the security risk from the installation...
    Group
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between tw...
    Group
    Show

  • Verify Permissions on SSH Server Private *_key Key Files

    SSH server private keys - files that match the <code>/etc/ssh/*_key</code> glob, have to have restricted permissions. If those files are owned by t...
    Rule Medium Severity
    Show

  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_confi...
    Group
    Show

  • Disable Host-Based Authentication

    SSH's cryptographic host-based authentication is more secure than <code>.rhosts</code> authentication. However, it is not recommended that hosts un...
    Rule Medium Severity
    Show

  • Enable SSH Server firewalld Firewall Exception

    If the SSH server is in use, inbound connections to SSH's port should be allowed to permit remote access through SSH. In more restrictive firewalld...
    Rule Medium Severity
    Show

  • Disable SSH Access via Empty Passwords

    Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used ...
    Rule High Severity
    Show

  • Disable GSSAPI Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like GSSAPI. <br> The default SSH configuration disallows ...
    Rule Medium Severity
    Show

  • Disable Kerberos Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like Kerberos. <br> The default SSH configuration disallow...
    Rule Medium Severity
    Show

  • Disable SSH Support for .rhosts Files

    SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via <code>.rhosts</code> fil...
    Rule Medium Severity
    Show

  • Disable SSH Root Login

    The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following lin...
    Rule Medium Severity
    Show

  • Disable SSH Support for User Known Hosts

    SSH can allow system users to connect to systems if a cache of the remote systems public keys is available. This should be disabled. <br> ...
    Rule Medium Severity
    Show

  • Disable X11 Forwarding

    The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the cap...
    Rule Medium Severity
    Show

  • Do Not Allow SSH Environment Options

    Ensure that users are not able to override environment variables of the SSH daemon. <br> The default SSH configuration disables environment process...
    Rule Medium Severity
    Show

  • Enable Use of Strict Mode Checking

    SSHs <code>StrictModes</code> option checks file and ownership permissions in the user's home directory <code>.ssh</code> folder before accepting l...
    Rule Medium Severity
    Show

  • Enable SSH Warning Banner

    To enable the warning banner and ensure it is consistent across the system, add or correct the following line in <code>/etc/ssh/sshd_config</code...
    Rule Medium Severity
    Show

  • Enable SSH Print Last Log

    Ensure that SSH will display the date and time of the last successful account logon. <br> The default SSH configuration enables print of the date a...
    Rule Medium Severity
    Show

  • Set LogLevel to INFO

    The INFO parameter specifices that record login and logout activity will be logged. <br> The default SSH configuration sets the log level to INFO. ...
    Rule Low Severity
    Show

  • Set SSH authentication attempt limit

    The <code>MaxAuthTries</code> parameter specifies the maximum number of authentication attempts permitted per connection. Once the number of failur...
    Rule Medium Severity
    Show

  • System Security Services Daemon

    The System Security Services Daemon (SSSD) is a system daemon that provides access to different identity and authentication providers such as Red H...
    Group
    Show

  • Enable Smartcards in SSSD

    SSSD should be configured to authenticate access to the system using smart cards. To enable smart cards in SSSD, set <code>pam_cert_auth</code> to ...
    Rule Medium Severity
    Show

  • USBGuard daemon

    The USBGuard daemon enforces the USB device authorization policy for all USB devices.
    Group
    Show

  • Install usbguard Package

    The usbguard package can be installed with the following command: 
    $ sudo yum install usbguard
    Rule Medium Severity
    Show

  • Enable the USBGuard Service

    The USBGuard service should be enabled. The <code>usbguard</code> service can be enabled with the following command: <pre>$ sudo systemctl enable ...
    Rule Medium Severity
    Show

  • Prevent non-Privileged Users from Modifying Network Interfaces using nmcli

    By default, non-privileged users are given permissions to modify networking interfaces and configurations using the <code>nmcli</code> command. Non...
    Rule Medium Severity
    Show

  • Disable the authlogin_nsswitch_use_ldap SELinux Boolean

    By default, the SELinux boolean <code>authlogin_nsswitch_use_ldap</code> is disabled. If this setting is enabled, it should be disabled. To disabl...
    Rule Medium Severity
    Show

  • Disable the authlogin_radius SELinux Boolean

    By default, the SELinux boolean <code>authlogin_radius</code> is disabled. If this setting is enabled, it should be disabled. To disable the <code...
    Rule Medium Severity
    Show

  • Chrony Configure Pool and Server

    <code>Chrony</code> is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of s...
    Rule Medium Severity
    Show

  • Disable snmpd Service

    The snmpd service can be disabled with the following command: 
    $ sudo systemctl mask --now snmpd.service
    Rule Low Severity
    Show

  • Configure SNMP Service to Use Only SNMPv3 or Newer

    Edit <code>/etc/snmp/snmpd.conf</code>, removing any references to <code>rocommunity</code>, <code>rwcommunity</code>, or <code>com2sec</code>. Upo...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules