Skip to content
Log In

Standard System Security Profile for Kylin Server V10

Rules and Groups employed by this XCCDF Profile

  • TFTP Server

    TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking oper...
    Group
    Show

  • Uninstall tftp-server Package

    The tftp-server package can be removed with the following command: 
     $ sudo dnf remove tftp-server
    Rule High Severity
    Show

  • Remove tftp Daemon

    Trivial File Transfer Protocol (TFTP) is a simple file transfer protocol, typically used to automatically transfer configuration or boot files between systems. TFTP does not support authentication ...
    Rule Low Severity
    Show

  • SNMP Server

    The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP were well-known for weak security, such as plaintex...
    Group
    Show

  • Disable SNMP Server if Possible

    The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but is not needed, the software should be disabled an...
    Group
    Show

  • Uninstall net-snmp Package

    The net-snmp package provides the snmpd service. The net-snmp package can be removed with the following command: 
    $ sudo dnf remove net-snmp
    Rule Unknown Severity
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, throu...
    Group
    Show

  • Install the OpenSSH Server Package

    The openssh-server package should be installed. The openssh-server package can be installed with the following command: 
    $ sudo dnf install openssh-server
    Rule Medium Severity
    Show

  • Enable the OpenSSH Service

    The SSH server service, sshd, is commonly needed. The sshd service can be enabled with the following command: 
    $ sudo systemctl enable sshd.service
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Private *_key Key Files

    SSH server private keys - files that match the <code>/etc/ssh/*_key</code> glob, have to have restricted permissions. If those files are owned by the <code>root</code> user and the <code>root</code...
    Rule Medium Severity
    Show

  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_config</code>. The following recommendations can be app...
    Group
    Show

  • Disable Host-Based Authentication

    SSH's cryptographic host-based authentication is more secure than <code>.rhosts</code> authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organ...
    Rule Medium Severity
    Show

  • Allow Only SSH Protocol 2

    Only SSH protocol version 2 connections should be permitted. The default setting in <code>/etc/ssh/sshd_config</code> is correct, and can be verified by ensuring that the following line appears: <p...
    Rule High Severity
    Show

  • Disable SSH Access via Empty Passwords

    Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used if no value is set for <code>PermitEmptyPasswords<...
    Rule High Severity
    Show

  • Disable PubkeyAuthentication Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms. To disable PubkeyAuthentication authentication, add or correct the following line in <code>/etc/ssh/sshd_...
    Rule Medium Severity
    Show

  • Disable SSH Support for .rhosts Files

    SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via <code>.rhosts</code> files. <br> The default SSH configuration disables su...
    Rule Medium Severity
    Show

  • Disable SSH Root Login

    The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following line in <code>/etc/ssh/sshd_config</code>: <pre>Pe...
    Rule Medium Severity
    Show

  • Disable X11 Forwarding

    The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the capability to encrypt remote X11 connections when SSH...
    Rule Medium Severity
    Show

  • Do Not Allow SSH Environment Options

    Ensure that users are not able to override environment variables of the SSH daemon. <br> The default SSH configuration disables environment processing. The appropriate configuration is used if no v...
    Rule Medium Severity
    Show

  • Limit Users' SSH Access

    By default, the SSH configuration allows any user with an account to access the system. There are several options available to limit which users and group can access the system via SSH. It is recom...
    Rule Unknown Severity
    Show

  • Enable SSH Print Last Log

    Ensure that SSH will display the date and time of the last successful account logon. <br> The default SSH configuration enables print of the date and time of the last login. The appropriate configu...
    Rule Medium Severity
    Show

  • Set SSH Daemon LogLevel to VERBOSE

    The <code>VERBOSE</code> parameter configures the SSH daemon to record login and logout activity. To specify the log level in SSH, add or correct the following line in <code>/etc/ssh/sshd_config<...
    Rule Medium Severity
    Show

  • Set SSH authentication attempt limit

    The <code>MaxAuthTries</code> parameter specifies the maximum number of authentication attempts permitted per connection. Once the number of failures reaches half this value, additional failures ar...
    Rule Medium Severity
    Show

  • Use Only Strong Ciphers

    Limit the ciphers to strong algorithms. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in <code>/etc/ssh/sshd_config</code> demonstrates use of those...
    Rule Medium Severity
    Show

  • System Accounting with auditd

    The audit service provides substantial capabilities for recording system activities. By default, the service audits about SELinux AVC denials and certain types of security-relevant events such as s...
    Group
    Show

  • Enable auditd Service

    The <code>auditd</code> service is an essential userspace component of the Linux Auditing System, as it is responsible for writing audit records to disk. The <code>auditd</code> service can be ena...
    Rule Medium Severity
    Show

  • Configure auditd Data Retention

    The audit system writes data to <code>/var/log/audit/audit.log</code>. By default, <code>auditd</code> rotates 5 logs by size (6MB), retaining a maximum of 30MB of data in total, and refuses to wri...
    Group
    Show

  • Configure auditd space_left on Low Disk Space

    The <code>auditd</code> service can be configured to take an action when disk space is running low but prior to running out of space completely. Edit the file <code>/etc/audit/auditd.conf</code>. A...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules