Skip to content
ATO Pathways
  Log In

Sample expanded Security Profile for OpenEmbedded Distros

Rules and Groups employed by this XCCDF Profile

  • Verify Group Who Owns /etc/at.allow file

    If <code>/etc/at.allow</code> exists, it must be group-owned by <code>root</code>. To properly set the group owner of <code>/etc/at.allow</code>, ...
    Rule Medium Severity
    Show

  • Verify Group Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be group-owned by <code>root</code>. To properly set the group owner of <code>/etc/cron.allow</cod...
    Rule Medium Severity
    Show

  • Verify User Who Owns /etc/at.allow file

    If <code>/etc/at.allow</code> exists, it must be owned by <code>root</code>. To properly set the owner of <code>/etc/at.allow</code>, run the comm...
    Rule Medium Severity
    Show

  • Verify User Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be owned by <code>root</code>. To properly set the owner of <code>/etc/cron.allow</code>, run the ...
    Rule Medium Severity
    Show

  • Verify Permissions on /etc/at.allow file

    If <code>/etc/at.allow</code> exists, it must have permissions <code>0640</code> or more restrictive. To properly set the permissions of <code>/e...
    Rule Medium Severity
    Show

  • Verify Permissions on /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must have permissions <code>0640</code> or more restrictive. To properly set the permissions of <code>...
    Rule Medium Severity
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server....
    Group
    Show

  • Disable DHCP Server

    The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not n...
    Group
    Show

  • Disable DHCP Service

    The <code>dhcpd</code> service should be disabled on any system that does not need to act as a DHCP server. The <code>dhcpd</code> service can be ...
    Rule Medium Severity
    Show

  • DNS Server

    Most organizations have an operational need to run at least one nameserver. However, there are many common attacks involving DNS server software, a...
    Group
    Show

  • Disable DNS Server

    DNS software should be disabled on any systems which does not need to be a nameserver. Note that the BIND DNS server software is not installed on O...
    Group
    Show

  • Disable named Service

    The named service can be disabled with the following command: 
    $ sudo systemctl mask --now named.service
    Rule Medium Severity
    Show

  • FTP Server

    FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data...
    Group
    Show

  • Disable vsftpd if Possible

    To minimize attack surface, disable vsftpd if at all possible.
    Group
    Show

  • Disable vsftpd Service

    The vsftpd service can be disabled with the following command: 
    $ sudo systemctl mask --now vsftpd.service
    Rule Medium Severity
    Show

  • Web Server

    The web server is responsible for providing access to content via the HTTP protocol. Web servers represent a significant security risk because: <br...
    Group
    Show

  • Disable Apache if Possible

    If Apache was installed and activated, but the system does not need to act as a web server, then it should be disabled and removed from the system.
    Group
    Show

  • Disable httpd Service

    The httpd service can be disabled with the following command: 
    $ sudo systemctl mask --now httpd.service
    Rule Unknown Severity
    Show

  • IMAP and POP3 Server

    Dovecot provides IMAP and POP3 services. It is not installed by default. The project page at <a href="http://www.dovecot.org">http://www.dovec...
    Group
    Show

  • Disable Dovecot

    If the system does not need to operate as an IMAP or POP3 server, the dovecot software should be disabled and removed.
    Group
    Show

  • Disable Dovecot Service

    The dovecot service can be disabled with the following command: 
    $ sudo systemctl mask --now dovecot.service
    Rule Unknown Severity
    Show

  • LDAP

    LDAP is a popular directory service, that is, a standardized way of looking up information from a central database. OpenEmbedded includes software ...
    Group
    Show

  • Configure OpenLDAP Server

    This section details some security-relevant settings for an OpenLDAP server.
    Group
    Show

  • Disable LDAP Server (slapd)

    The Lightweight Directory Access Protocol (LDAP) is a service that provides a method for looking up information from a central database.
    Rule Medium Severity
    Show

  • NFS and RPC

    The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circ...
    Group
    Show

  • Disable All NFS Services if Possible

    If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable sub...
    Group
    Show

  • Disable Services Used Only by NFS

    If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd. <br> <br> All of these daemons run with elevated priv...
    Group
    Show

  • Disable rpcbind Service

    The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they a...
    Rule Low Severity
    Show

  • Configure NFS Clients

    The steps in this section are appropriate for systems which operate as NFS clients.
    Group
    Show

  • Disable NFS Server Daemons

    There is no need to run the NFS server daemons <code>nfs</code> and <code>rpcsvcgssd</code> except on a small number of properly secured systems de...
    Group
    Show

  • Disable Network File System (nfs)

    The Network File System (NFS) service allows remote hosts to mount and interact with shared filesystems on the local system. If the local system is...
    Rule Unknown Severity
    Show

  • Obsolete Services

    This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or...
    Group
    Show

  • Ensure rsyncd service is disabled

    The rsyncd service can be disabled with the following command: 
    $ sudo systemctl mask --now rsyncd.service
    Rule Medium Severity
    Show

  • NIS

    The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and oth...
    Group
    Show

  • Disable ypserv Service

    The <code>ypserv</code> service, which allows the system to act as a client in a NIS or NIS+ domain, should be disabled. The <code>ypserv</code> s...
    Rule Medium Severity
    Show

  • Rlogin, Rsh, and Rexec

    The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.
    Group
    Show

  • Remove Rsh Trust Files

    The files <code>/etc/hosts.equiv</code> and <code>~/.rhosts</code> (in each user's home directory) list remote hosts and users that are trusted by ...
    Rule High Severity
    Show

  • Print Support

    The Common Unix Printing System (CUPS) service provides both local and network printing support. A system running the CUPS service can accept print...
    Group
    Show

  • Disable the CUPS Service

    The cups service can be disabled with the following command: 
    $ sudo systemctl mask --now cups.service
    Rule Unknown Severity
    Show

  • Proxy Server

    A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow throug...
    Group
    Show

  • Disable Squid if Possible

    If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.
    Group
    Show

  • Disable Squid

    The squid service can be disabled with the following command: 
    $ sudo systemctl mask --now squid.service
    Rule Unknown Severity
    Show

  • Samba(SMB) Microsoft Windows File Sharing Server

    When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two soft...
    Group
    Show

  • Disable Samba if Possible

    Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to pr...
    Group
    Show

  • Disable Samba

    The smb service can be disabled with the following command: 
    $ sudo systemctl mask --now smb.service
    Rule Low Severity
    Show

  • SNMP Server

    The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP w...
    Group
    Show

  • Disable SNMP Server if Possible

    The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but...
    Group
    Show

  • Disable snmpd Service

    The snmpd service can be disabled with the following command: 
    $ sudo systemctl mask --now snmpd.service
    Rule Low Severity
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between tw...
    Group
    Show

  • Verify Group Who Owns SSH Server config file

    To properly set the group owner of /etc/ssh/sshd_config, run the command: 
    $ sudo chgrp root /etc/ssh/sshd_config
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules