Skip to content
Log In

DISA STIG for SUSE Linux Enterprise Micro (SLEM) 5

Rules and Groups employed by this XCCDF Profile

  • Ensure that Users Path Contains Only Local Directories

    Ensure that all interactive user initialization files executable search path statements do not contain statements that will reference a working directory other than the users home directory.
    Rule Medium Severity
    Show

  • All Interactive Users Must Have A Home Directory Defined

    Assign home directories to all interactive users that currently do not have a home directory assigned. This rule checks if the home directory is properly defined in a folder which has at least one...
    Rule Medium Severity
    Show

  • All Interactive Users Home Directories Must Exist

    Create home directories to all local interactive users that currently do not have a home directory assigned. Use the following commands to create the user home directory assigned in <code>/etc/pass...
    Rule Medium Severity
    Show

  • All Interactive User Home Directories Must Be Group-Owned By The Primary Group

    Change the group owner of interactive users home directory to the group found in <code>/etc/passwd</code>. To change the group owner of interactive users home directory, use the following command: ...
    Rule Medium Severity
    Show

  • Ensure All User Initialization Files Have Mode 0740 Or Less Permissive

    Set the mode of the user initialization files to 0740 with the following command: 
    $ sudo chmod 0740 /home/USER/.INIT_FILE
    Rule Medium Severity
    Show

  • All Interactive User Home Directories Must Have mode 0750 Or Less Permissive

    Change the mode of interactive users home directories to <code>0750</code>. To change the mode of interactive users home directory, use the following command: <pre>$ sudo chmod 0750 /home/<i>USER</...
    Rule Medium Severity
    Show

  • Ensure that Users Have Sensible Umask Values

    The umask setting controls the default permissions for the creation of new files. With a default <code>umask</code> setting of 077, files and directories created by users will not be readable by an...
    Group
    Show

  • Ensure the Default Umask is Set Correctly in login.defs

    To ensure the default umask controlled by <code>/etc/login.defs</code> is set properly, add or correct the <code>UMASK</code> setting in <code>/etc/login.defs</code> to read as follows: <pre>UMASK ...
    Rule Medium Severity
    Show

  • GRUB2 bootloader configuration

    During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly ...
    Group
    Show

  • Non-UEFI GRUB2 bootloader configuration

    Non-UEFI GRUB2 bootloader configuration
    Group
    Show

  • Set Boot Loader Password in grub2

    The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br> <br> Since plaintext passwords are a security risk, generate a hash...
    Rule High Severity
    Show

  • UEFI GRUB2 bootloader configuration

    UEFI GRUB2 bootloader configuration
    Group
    Show

  • Set the UEFI Boot Loader Password

    The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br> <br> Since plaintext passwords are a security risk, generate a hash...
    Rule High Severity
    Show

  • Configure Syslog

    The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lac...
    Group
    Show

  • systemd-journald

    systemd-journald is a system service that collects and stores logging data. It creates and maintains structured, indexed journals based on logging information that is received from a variety of sou...
    Group
    Show

  • Install systemd-journal-remote Package

    Journald (via systemd-journal-remote ) supports the ability to send log events it gathers to a remote log host or to receive messages from remote hosts, thus enabling centralised log management.
    Rule Medium Severity
    Show

  • Enable systemd-journal-upload Service

    SUSE Linux Enterprise Micro 5 must offload rsyslog messages for networked systems in real time and offload standalone systems at least weekly. The <code>systemd-journal-upload</code> service can b...
    Rule Medium Severity
    Show

  • Configure systemd-journal-upload TLS parameters: ServerKeyFile,ServerCertificateFile and TrustedCertificateFile

    SUSE Linux Enterprise Micro 5 must offload rsyslog messages for networked systems in real time and offload standalone systems at least weekly
    Rule Medium Severity
    Show

  • Configure systemd-journal-upload URL

    SUSE Linux Enterprise Micro 5 must offload rsyslog messages for networked systems in real time and offload standalone systems at least weekly
    Rule Medium Severity
    Show

  • Network Configuration and Firewalls

    Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking wh...
    Group
    Show

  • Ensure System is Not Acting as a Network Sniffer

    The system should not be acting as a network sniffer, which can capture all traffic on the network to which it is connected. Run the following to determine if any interface is running in promiscuou...
    Rule Medium Severity
    Show

  • firewalld

    The dynamic firewall daemon <code>firewalld</code> provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections an...
    Group
    Show

  • Inspect and Activate Default firewalld Rules

    Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. <code>NetworkManager</code>...
    Group
    Show

  • Verify firewalld Enabled

    The firewalld service can be enabled with the following command: 
    $ sudo systemctl enable firewalld.service
    Rule Medium Severity
    Show

  • IPv6

    The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important featu...
    Group
    Show

  • Configure IPv6 Settings if Necessary

    A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually...
    Group
    Show

  • Disable Accepting ICMP Redirects for All IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0</pre> To mak...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0</pre> ...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for IPv6 Forwarding

    To set the runtime status of the <code>net.ipv6.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.all.forwarding=0</pre> To make sure that ...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces

    To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0</pre...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default

    To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for IPv6 Forwarding by default

    To set the runtime status of the <code>net.ipv6.conf.default.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv6.conf.default.forwarding=0</pre> To make su...
    Rule Medium Severity
    Show

  • Kernel Parameters Which Affect Networking

    The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.
    Group
    Show

  • Network Related Kernel Runtime Parameters for Hosts and Routers

    Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.
    Group
    Show

  • Disable Accepting ICMP Redirects for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0</pre> To mak...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0</pre> ...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0</pre...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=...
    Rule Medium Severity
    Show

  • Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces

    To set the runtime status of the <code>net.ipv4.tcp_syncookies</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.tcp_syncookies=1</pre> To make sure that the settin...
    Rule Medium Severity
    Show

  • Network Parameters for Hosts Only

    If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.
    Group
    Show

  • Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0</pre> To make su...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0</pre> To...
    Rule Medium Severity
    Show

  • Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.ip_forward</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.ip_forward=0</pre> To make sure that the setting is per...
    Rule Medium Severity
    Show

  • Wireless Networking

    Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be include...
    Group
    Show

  • Disable Wireless Through Software Configuration

    If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following methods can disable software support for wireless ...
    Group
    Show

  • Deactivate Wireless Network Interfaces

    Deactivating wireless network interfaces should prevent normal usage of the wireless capability. <br> <br> Configure the system to disable wireless network interfaces by issuing the follo...
    Rule Medium Severity
    Show

  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access. <br> <br> Severa...
    Group
    Show

  • Verify Permissions on Important Files and Directories

    Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verifie...
    Group
    Show

  • Verify that All World-Writable Directories Have Sticky Bits Set

    When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...
    Rule Medium Severity
    Show

  • Ensure All World-Writable Directories Are Group Owned by a System Account

    All directories in local partitions which are world-writable should be group owned by root or another system account. If any world-writable directories are not group owned by a system account, this...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules