Skip to content
Log In

CIS Amazon Linux 2023 Benchmark for Level 1 - Server

Rules and Groups employed by this XCCDF Profile

  • Rlogin, Rsh, and Rexec

    The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.
    Group
    Show

  • Remove Rsh Trust Files

    The files <code>/etc/hosts.equiv</code> and <code>~/.rhosts</code> (in each user's home directory) list remote hosts and users that are trusted by the local system when using the rshd daemon. To re...
    Rule High Severity
    Show

  • Telnet

    The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use tel...
    Group
    Show

  • Uninstall telnet-server Package

    The telnet-server package can be removed with the following command: 
    $ sudo dnf remove telnet-server
    Rule High Severity
    Show

  • Remove telnet Clients

    The telnet client allows users to start connections to other systems via the telnet protocol.
    Rule Low Severity
    Show

  • TFTP Server

    TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking oper...
    Group
    Show

  • Uninstall tftp-server Package

    The tftp-server package can be removed with the following command: 
     $ sudo dnf remove tftp-server
    Rule High Severity
    Show

  • Print Support

    The Common Unix Printing System (CUPS) service provides both local and network printing support. A system running the CUPS service can accept print jobs from other systems, process them, and send t...
    Group
    Show

  • Uninstall CUPS Package

    The cups package can be removed with the following command: 
    $ sudo dnf remove cups
    Rule Unknown Severity
    Show

  • Proxy Server

    A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow through it. Therefore, if one is required, the system ac...
    Group
    Show

  • Disable Squid if Possible

    If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.
    Group
    Show

  • Uninstall squid Package

    The squid package can be removed with the following command: 
     $ sudo dnf remove squid
    Rule Unknown Severity
    Show

  • Samba(SMB) Microsoft Windows File Sharing Server

    When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two software packages that provide Samba support. The firs...
    Group
    Show

  • Disable Samba if Possible

    Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to provide Microsoft Windows file and print sharing fun...
    Group
    Show

  • Uninstall Samba Package

    The samba package can be removed with the following command: 
     $ sudo dnf remove samba
    Rule Unknown Severity
    Show

  • SNMP Server

    The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP were well-known for weak security, such as plaintex...
    Group
    Show

  • Disable SNMP Server if Possible

    The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but is not needed, the software should be disabled an...
    Group
    Show

  • Uninstall net-snmp Package

    The net-snmp package provides the snmpd service. The net-snmp package can be removed with the following command: 
    $ sudo dnf remove net-snmp
    Rule Unknown Severity
    Show

  • Disable snmpd Service

    The snmpd service can be disabled with the following command: 
    $ sudo systemctl mask --now snmpd.service
    Rule Low Severity
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, throu...
    Group
    Show

  • Verify Group Who Owns SSH Server config file

    To properly set the group owner of /etc/ssh/sshd_config, run the command: 
    $ sudo chgrp root /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Group Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be group-owned by ssh_keys group.
    Rule Medium Severity
    Show

  • Verify Group Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be group-owned by root group.
    Rule Medium Severity
    Show

  • Verify Owner on SSH Server config file

    To properly set the owner of /etc/ssh/sshd_config, run the command: 
    $ sudo chown root /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be owned by root user.
    Rule Medium Severity
    Show

  • Verify Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be owned by root user.
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server config file

    To properly set the permissions of /etc/ssh/sshd_config, run the command: 
    $ sudo chmod 0600 /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Private *_key Key Files

    SSH server private keys - files that match the <code>/etc/ssh/*_key</code> glob, have to have restricted permissions. If those files are owned by the <code>root</code> user and the <code>root</code...
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Public *.pub Key Files

    To properly set the permissions of /etc/ssh/*.pub, run the command: 
    $ sudo chmod 0644 /etc/ssh/*.pub
    Rule Medium Severity
    Show

  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_config</code>. The following recommendations can be app...
    Group
    Show

  • Set SSH Client Alive Count Max

    The SSH server sends at most <code>ClientAliveCountMax</code> messages during a SSH session and waits for a response from the SSH client. The option <code>ClientAliveInterval</code> configures time...
    Rule Medium Severity
    Show

  • Set SSH Client Alive Interval

    SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automatically logged out. <br> <br> To set this t...
    Rule Medium Severity
    Show

  • Disable Host-Based Authentication

    SSH's cryptographic host-based authentication is more secure than <code>.rhosts</code> authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organ...
    Rule Medium Severity
    Show

  • Disable SSH Access via Empty Passwords

    Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used if no value is set for <code>PermitEmptyPasswords<...
    Rule High Severity
    Show

  • Disable SSH Support for .rhosts Files

    SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via <code>.rhosts</code> files. <br> The default SSH configuration disables su...
    Rule Medium Severity
    Show

  • Disable SSH Root Login

    The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following line in <code>/etc/ssh/sshd_config.d/00-compliancea...
    Rule Medium Severity
    Show

  • Do Not Allow SSH Environment Options

    Ensure that users are not able to override environment variables of the SSH daemon. <br> The default SSH configuration disables environment processing. The appropriate configuration is used if no v...
    Rule Medium Severity
    Show

  • Enable PAM

    UsePAM Enables the Pluggable Authentication Module interface. If set to “yes” this will enable PAM authentication using ChallengeResponseAuthentication and PasswordAuthentication in addition to PAM...
    Rule Medium Severity
    Show

  • Enable SSH Warning Banner

    To enable the warning banner and ensure it is consistent across the system, add or correct the following line in <code>/etc/ssh/sshd_config</code>: <pre>Banner /etc/issue.net</pre> Another sectio...
    Rule Medium Severity
    Show

  • Limit Users' SSH Access

    By default, the SSH configuration allows any user with an account to access the system. There are several options available to limit which users and group can access the system via SSH. It is recom...
    Rule Unknown Severity
    Show

  • Ensure SSH LoginGraceTime is configured

    The <code>LoginGraceTime</code> parameter to the SSH server specifies the time allowed for successful authentication to the SSH server. The longer the Grace period is the more open unauthenticated ...
    Rule Medium Severity
    Show

  • Set SSH Daemon LogLevel to VERBOSE

    The <code>VERBOSE</code> parameter configures the SSH daemon to record login and logout activity. To specify the log level in SSH, add or correct the following line in <code>/etc/ssh/sshd_config....
    Rule Medium Severity
    Show

  • Set SSH authentication attempt limit

    The <code>MaxAuthTries</code> parameter specifies the maximum number of authentication attempts permitted per connection. Once the number of failures reaches half this value, additional failures ar...
    Rule Medium Severity
    Show

  • Set SSH MaxSessions limit

    The <code>MaxSessions</code> parameter specifies the maximum number of open sessions permitted from a given connection. To set MaxSessions edit <code>/etc/ssh/sshd_config</code> as follows: <pre>Ma...
    Rule Medium Severity
    Show

  • Ensure SSH MaxStartups is configured

    The MaxStartups parameter specifies the maximum number of concurrent unauthenticated connections to the SSH daemon. Additional connections will be dropped until authentication succeeds or the Login...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules