Skip to content
ATO Pathways
  Log In

No profile (default benchmark)

Rules and Groups employed by this XCCDF Profile

  • SRG-NET-000019-RTR-000003

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to disable Protocol Independent Multicast (PIM) on all interfaces that are not required to support multicast routing.

    &lt;VulnDiscussion&gt;If multicast traffic is forwarded beyond the intended boundary, it is possible that it can be intercepted by unauthorized or ...
    Rule High Severity
    Show

  • SRG-NET-000019-RTR-000007

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to have all inactive interfaces removed.

    &lt;VulnDiscussion&gt;An inactive interface is rarely monitored or controlled and may expose a network to an undetected attack on that interface. U...
    Rule High Severity
    Show

  • SRG-NET-000131-RTR-000035

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to have the Dynamic Host Configuration Protocol (DHCP) service disabled if not in use.

    &lt;VulnDiscussion&gt;A compromised router introduces risk to the entire network infrastructure, as well as data resources that are accessible via ...
    Rule Info Severity
    Show

  • SRG-NET-000168-RTR-000077

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to use encryption for Open Shortest Path First (OSPF) routing protocol authentication.

    &lt;VulnDiscussion&gt;A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect o...
    Rule High Severity
    Show

  • SRG-NET-000205-RTR-000014

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to restrict it from accepting outbound IP packets that contain an illegitimate address in the source address field by enabling Unicast Reverse Path Forwarding (uRPF).

    &lt;VulnDiscussion&gt;A compromised host in an enclave can be used by a malicious platform to launch cyber attacks on third parties. This is a comm...
    Rule High Severity
    Show

  • SRG-NET-000230-RTR-000001

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to implement message authentication for all control plane protocols.

    &lt;VulnDiscussion&gt;A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect o...
    Rule High Severity
    Show

  • SRG-NET-000230-RTR-000002

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway must be configured to use a unique password for each autonomous system (AS) with which it peers.

    &lt;VulnDiscussion&gt;If the same keys are used between External Border Gateway Protocol (eBGP) neighbors, the chance of a hacker compromising any ...
    Rule Medium Severity
    Show

  • SRG-NET-000362-RTR-000113

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to have Internet Control Message Protocol (ICMP) unreachable notifications disabled on all external interfaces.

    &lt;VulnDiscussion&gt;The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ...
    Rule Medium Severity
    Show

  • SRG-NET-000362-RTR-000114

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to have Internet Control Message Protocol (ICMP) mask replies disabled on all external interfaces.

    &lt;VulnDiscussion&gt;The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ...
    Rule Medium Severity
    Show

  • SRG-NET-000362-RTR-000115

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to have Internet Control Message Protocol (ICMP) redirects disabled on all external interfaces.

    &lt;VulnDiscussion&gt;The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ...
    Rule Medium Severity
    Show

  • SRG-NET-000362-RTR-000117

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to use the Border Gateway Protocol (BGP) maximum prefixes feature to protect against route table flooding and prefix de-aggregation attacks.

    &lt;VulnDiscussion&gt;The effects of prefix de-aggregation can degrade router performance due to the size of routing tables and also result in blac...
    Rule Medium Severity
    Show

  • SRG-NET-000512-RTR-000001

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to use its loopback address as the source address for Internal Border Gateway Protocol (IBGP) peering sessions.

    &lt;VulnDiscussion&gt;Using a loopback address as the source address offers a multitude of uses for security, access, management, and scalability o...
    Rule Info Severity
    Show

  • SRG-NET-000512-RTR-000012

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to advertise a hop limit of at least 32 in Router Advertisement messages for IPv6 stateless auto-configuration deployments.

    &lt;VulnDiscussion&gt;The Neighbor Discovery (ND) protocol allows a hop limit value to be advertised by routers in a Router Advertisement message b...
    Rule Info Severity
    Show

  • SRG-NET-000131-RTR-000035

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to have routing protocols disabled if not in use.

    &lt;VulnDiscussion&gt;A compromised router introduces risk to the entire network infrastructure, as well as data resources that are accessible via ...
    Rule Info Severity
    Show

  • SRG-NET-000131-RTR-000035

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to have multicast disabled if not in use.

    &lt;VulnDiscussion&gt;A compromised router introduces risk to the entire network infrastructure, as well as data resources that are accessible via ...
    Rule Info Severity
    Show

  • SRG-NET-000168-RTR-000077

    <GroupDescription></GroupDescription>
    Group
    Show

  • The NSX Tier-0 Gateway router must be configured to use encryption for border gateway protocol (BGP) routing protocol authentication.

    &lt;VulnDiscussion&gt;A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect o...
    Rule High Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules