III - Administrative Sensitive
Rules and Groups employed by this XCCDF Profile
-
NET2001
<GroupDescription></GroupDescription>Group -
Multi-Protocol Labeled Switching (MPLS) labels must not be exchanged between the enclaves edge routers and any external neighbor routers.
<VulnDiscussion>MPLS label exchange via Label Distribution Protocol (LDP) or Resource Reservation Protocol (RSVP) with any external neighbor ...Rule Medium Severity -
NET2002
<GroupDescription></GroupDescription>Group -
Label Distribution Protocol (LDP) must be synchronized with the Interior Gateway Protocol (IGP) to minimize packet loss when an IGP adjacency is established prior to LDP peers completing label exchange.
<VulnDiscussion>Packet loss can occur when an IGP adjacency is established and the router begins forwarding packets using the new adjacency b...Rule Low Severity -
NET2004
<GroupDescription></GroupDescription>Group -
Rapid Spanning Tree Protocol (STP) must be implemented at the access and distribution layers where Virtual Local Area Networks (VLANs) span multiple switches.
<VulnDiscussion>Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent Layer 2 loops when a broadcast domain spans mu...Rule Low Severity -
NET2005
<GroupDescription></GroupDescription>Group -
A Quality of Service (QoS) policy must be implemented to provide preferred treatment for Command and Control (C2) real-time services and control plane traffic.
<VulnDiscussion>Different applications have unique requirements and toleration levels for delay, jitter, packet loss, and availability. To ma...Rule Low Severity -
NET2006
<GroupDescription></GroupDescription>Group -
Protocol Independent Multicast (PIM) must be disabled on all router interfaces that are not required to support multicast routing.
<VulnDiscussion>PIM is a routing protocol that is used by the IP core for forwarding multicast traffic. PIM operates independent of any parti...Rule Medium Severity -
NET2007
<GroupDescription></GroupDescription>Group -
A Protocol Independent Multicast (PIM) neighbor filter must be implemented to restrict and control multicast traffic.
<VulnDiscussion>Protocol Independent Multicast (PIM) is a routing protocol that is used by the IP core for forwarding multicast traffic. PIM ...Rule Low Severity -
NET2008
<GroupDescription></GroupDescription>Group -
The multicast domain must block inbound and outbound administratively-scoped multicast traffic at the edge.
<VulnDiscussion>A multicast boundary must be established to ensure that administratively-scoped multicast traffic does not flow into or out o...Rule Low Severity -
NET2009
<GroupDescription></GroupDescription>Group -
The multicast domain must block inbound and outbound Auto-RP discovery and announcement messages at the edge.
<VulnDiscussion>With static RP, the RP address for any multicast group must be consistent across all routers in a multicast domain. A static ...Rule Low Severity -
NET2010
<GroupDescription></GroupDescription>Group -
Protocol Independent Multicast (PIM) register messages received from a downstream multicast Designated Routers (DR) must be filtered for any reserved or any other undesirable multicast groups.
<VulnDiscussion>Customer networks that do not maintain a multicast domain and only require the IP multicast service will be required to stand...Rule Low Severity -
NET2011
<GroupDescription></GroupDescription>Group -
Protocol Independent Multicast (PIM) join messages received from a downstream multicast Designated Routers (DR) must be filtered for any reserved or any other undesirable multicast groups.
<VulnDiscussion>Customer networks that do not maintain a multicast domain and only require the IP multicast service will be required to stand...Rule Low Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.