Skip to content

II - Mission Support Classified

Rules and Groups employed by this XCCDF Profile

  • SRG-NET-000512-RTR-000004

    <GroupDescription></GroupDescription>
    Group
  • The Juniper MPLS router must be configured to have TTL Propagation disabled.

    &lt;VulnDiscussion&gt;The head end of the label-switched path (LSP), the label edge router (LER) will decrement the IP packet's time-to-live (TTL) ...
    Rule Medium Severity
  • SRG-NET-000512-RTR-000005

    <GroupDescription></GroupDescription>
    Group
  • The Juniper PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs.

    &lt;VulnDiscussion&gt;The primary security model for an MPLS L3VPN infrastructure is traffic separation. The service provider must guarantee the cu...
    Rule High Severity
  • SRG-NET-000512-RTR-000006

    <GroupDescription></GroupDescription>
    Group
  • The Juniper PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT).

    &lt;VulnDiscussion&gt;The primary security model for an MPLS L3VPN as well as a VRF-lite infrastructure is traffic separation. Each interface can o...
    Rule High Severity
  • SRG-NET-000512-RTR-000007

    <GroupDescription></GroupDescription>
    Group
  • The Juniper PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD).

    &lt;VulnDiscussion&gt;An RD provides uniqueness to the customer address spaces within the MPLS L3VPN infrastructure. The concept of the VPN-IPv4 an...
    Rule Medium Severity
  • SRG-NET-000512-RTR-000008

    <GroupDescription></GroupDescription>
    Group
  • The Juniper PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit.

    &lt;VulnDiscussion&gt;VPWS is an L2VPN technology that provides a virtual circuit between two PE routers to forward layer 2 frames between two cust...
    Rule High Severity

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules