II - Mission Support Public
Rules and Groups employed by this XCCDF Profile
-
SRG-NET-000362-L2S-000025
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to enable DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources.
<VulnDiscussion>In an enterprise network, devices under administrative control are trusted sources. These devices include the switches, route...Rule Medium Severity -
SRG-NET-000362-L2S-000026
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to enable IP Source Guard on all user-facing or untrusted access VLANs.
<VulnDiscussion>IP Source Guard provides source IP address filtering on an untrusted layer 2 interface to prevent a malicious host from imper...Rule Medium Severity -
SRG-NET-000362-L2S-000027
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to enable Dynamic Address Resolution Protocol (ARP) Inspection (DAI) on all user VLANs.
<VulnDiscussion>DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC addre...Rule Medium Severity -
SRG-NET-000512-L2S-000001
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to enable Storm Control on all host-facing access interfaces.
<VulnDiscussion>A traffic storm occurs when packets flood a LAN, creating excessive traffic and degrading network performance. Traffic storm ...Rule Low Severity -
SRG-NET-000512-L2S-000002
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to enable IGMP or MLD Snooping on all VLANs.
<VulnDiscussion>IGMP and MLD snooping provides a way to constrain multicast traffic at layer 2. By monitoring the IGMP or MLD membership repo...Rule Low Severity -
SRG-NET-000512-L2S-000003
<GroupDescription></GroupDescription>Group -
If STP is used, the Juniper EX switch must be configured to implement Rapid STP, or Multiple STP, where VLANs span multiple switches with redundant links.
<VulnDiscussion>Spanning Tree Protocol (STP) is implemented on bridges and switches to prevent layer 2 loops when a broadcast domain spans mu...Rule Medium Severity -
SRG-NET-000512-L2S-000004
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to verify two-way connectivity on all interswitch trunked interfaces.
<VulnDiscussion>In topologies where fiber optic interconnections are used, physical misconnections can occur that allow a link to appear to b...Rule Medium Severity -
SRG-NET-000512-L2S-000007
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to assign all disabled access interfaces to an unused VLAN.
<VulnDiscussion>It is possible that a disabled access interface that is assigned to a user or management VLAN becomes enabled by accident or ...Rule Medium Severity -
SRG-NET-000512-L2S-000008
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must not be configured with VLANs used for L2 control traffic assigned to any host-facing access interface.
<VulnDiscussion>In a switched Ethernet network, some protocols use L2 Protocol Data Units (PDU) to communicate in-band management or other co...Rule Medium Severity -
SRG-NET-000512-L2S-000009
<GroupDescription></GroupDescription>Group -
The Juniper EX switch must be configured to prune the default VLAN from all trunked interfaces that do not require it.
<VulnDiscussion>All unassigned interfaces are placed into the default VLAN and devices connected to enabled, but unassigned interfaces can co...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.