Skip to content
ATO Pathways
  Log In

Standard System Security Profile for openEuler 22.03 LTS

Rules and Groups employed by this XCCDF Profile

  • Disable rpcbind Service

    The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they a...
    Rule Low Severity
    Show

  • Configure NFS Clients

    The steps in this section are appropriate for systems which operate as NFS clients.
    Group
    Show

  • Disable NFS Server Daemons

    There is no need to run the NFS server daemons <code>nfs</code> and <code>rpcsvcgssd</code> except on a small number of properly secured systems de...
    Group
    Show

  • Disable Network File System (nfs)

    The Network File System (NFS) service allows remote hosts to mount and interact with shared filesystems on the local system. If the local system is...
    Rule Unknown Severity
    Show

  • Network Time Protocol

    The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictabl...
    Group
    Show

  • The Chronyd service is enabled

    chrony is a daemon which implements the Network Time Protocol (NTP) is designed to synchronize system clocks across a variety of systems and use a ...
    Rule Medium Severity
    Show

  • Enable the NTP Daemon

    The ntpd service can be enabled with the following command: 
    $ sudo systemctl enable ntpd.service
    Rule Medium Severity
    Show

  • A remote time server for Chrony is configured

    <code>Chrony</code> is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of s...
    Rule Medium Severity
    Show

  • Configure server restrictions for ntpd

    ntpd is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use ...
    Rule Medium Severity
    Show

  • Specify a Remote NTP Server

    To specify a remote NTP server for time synchronization, edit the file <code>/etc/ntp.conf</code>. Add or correct the following lines, substituting...
    Rule Medium Severity
    Show

  • Obsolete Services

    This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or...
    Group
    Show

  • Ensure rsyncd service is disabled

    The rsyncd service can be disabled with the following command: 
    $ sudo systemctl mask --now rsyncd.service
    Rule Medium Severity
    Show

  • NIS

    The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and oth...
    Group
    Show

  • Remove NIS Client

    The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system conf...
    Rule Unknown Severity
    Show

  • Uninstall ypserv Package

    The ypserv package can be removed with the following command: 
    $ sudo dnf erase ypserv
    Rule High Severity
    Show

  • Telnet

    The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication informat...
    Group
    Show

  • Uninstall telnet-server Package

    The telnet-server package can be removed with the following command: 
    $ sudo dnf erase telnet-server
    Rule High Severity
    Show

  • Remove telnet Clients

    The telnet client allows users to start connections to other systems via the telnet protocol.
    Rule Low Severity
    Show

  • TFTP Server

    TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides littl...
    Group
    Show

  • Uninstall tftp-server Package

    The tftp-server package can be removed with the following command: 
     $ sudo dnf erase tftp-server
    Rule High Severity
    Show

  • Remove tftp Daemon

    Trivial File Transfer Protocol (TFTP) is a simple file transfer protocol, typically used to automatically transfer configuration or boot files betw...
    Rule Low Severity
    Show

  • Print Support

    The Common Unix Printing System (CUPS) service provides both local and network printing support. A system running the CUPS service can accept print...
    Group
    Show

  • Uninstall CUPS Package

    The cups package can be removed with the following command: 
    $ sudo dnf erase cups
    Rule Unknown Severity
    Show

  • Samba(SMB) Microsoft Windows File Sharing Server

    When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two soft...
    Group
    Show

  • Disable Samba if Possible

    Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to pr...
    Group
    Show

  • Uninstall Samba Package

    The samba package can be removed with the following command: 
     $ sudo dnf erase samba
    Rule Unknown Severity
    Show

  • SNMP Server

    The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP w...
    Group
    Show

  • Disable SNMP Server if Possible

    The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but...
    Group
    Show

  • Uninstall net-snmp Package

    The <code>net-snmp</code> package provides the snmpd service. The <code>net-snmp</code> package can be removed with the following command: <pre> $...
    Rule Unknown Severity
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between tw...
    Group
    Show

  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_confi...
    Group
    Show

  • Disable Host-Based Authentication

    SSH's cryptographic host-based authentication is more secure than <code>.rhosts</code> authentication. However, it is not recommended that hosts un...
    Rule Medium Severity
    Show

  • Allow Only SSH Protocol 2

    Only SSH protocol version 2 connections should be permitted. The default setting in <code>/etc/ssh/sshd_config</code> is correct, and can be verifi...
    Rule High Severity
    Show

  • Disable SSH Access via Empty Passwords

    Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used ...
    Rule High Severity
    Show

  • Disable SSH Support for .rhosts Files

    SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via <code>.rhosts</code> fil...
    Rule Medium Severity
    Show

  • Disable SSH Root Login

    The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following lin...
    Rule Medium Severity
    Show

  • Disable SSH TCP Forwarding

    The <code>AllowTcpForwarding</code> parameter specifies whether TCP forwarding is permitted. To disable TCP forwarding, add or correct the followin...
    Rule Medium Severity
    Show

  • Disable SSH Support for User Known Hosts

    SSH can allow system users to connect to systems if a cache of the remote systems public keys is available. This should be disabled. <br> ...
    Rule Medium Severity
    Show

  • Disable X11 Forwarding

    The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the cap...
    Rule Medium Severity
    Show

  • Do Not Allow SSH Environment Options

    Ensure that users are not able to override environment variables of the SSH daemon. <br> The default SSH configuration disables environment process...
    Rule Medium Severity
    Show

  • Enable PAM

    UsePAM Enables the Pluggable Authentication Module interface. If set to “yes” this will enable PAM authentication using ChallengeResponseAuthentica...
    Rule Medium Severity
    Show

  • Enable SSH Warning Banner

    To enable the warning banner and ensure it is consistent across the system, add or correct the following line in <code>/etc/ssh/sshd_config</code>...
    Rule Medium Severity
    Show

  • Ensure SSH LoginGraceTime is configured

    The <code>LoginGraceTime</code> parameter to the SSH server specifies the time allowed for successful authentication to the SSH server. The longer ...
    Rule Medium Severity
    Show

  • Set SSH Daemon LogLevel to VERBOSE

    The <code>VERBOSE</code> parameter configures the SSH daemon to record login and logout activity. To specify the log level in SSH, add or correct t...
    Rule Medium Severity
    Show

  • Set SSH authentication attempt limit

    The <code>MaxAuthTries</code> parameter specifies the maximum number of authentication attempts permitted per connection. Once the number of failur...
    Rule Medium Severity
    Show

  • Set SSH MaxSessions limit

    The <code>MaxSessions</code> parameter specifies the maximum number of open sessions permitted from a given connection. To set MaxSessions edit <co...
    Rule Medium Severity
    Show

  • Ensure SSH MaxStartups is configured

    The MaxStartups parameter specifies the maximum number of concurrent unauthenticated connections to the SSH daemon. Additional connections will be ...
    Rule Medium Severity
    Show

  • Use Only Strong Ciphers

    Limit the ciphers to strong algorithms. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in <code>/et...
    Rule Medium Severity
    Show

  • Use Only Strong Key Exchange algorithms

    Limit the Key Exchange to strong algorithms. The following line in <code>/etc/ssh/sshd_config</code> demonstrates use of those: <pre>KexAlgorithms ...
    Rule Medium Severity
    Show

  • Use Only Strong MACs

    Limit the MACs to strong hash algorithms. The following line in <code>/etc/ssh/sshd_config</code> demonstrates use of those MACs: <pre>MACs <xccdf-...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules