Skip to content
ATO Pathways
  Log In

Standard System Security Profile for openEuler 22.03 LTS

Rules and Groups employed by this XCCDF Profile

  • Disable Avahi Server if Possible

    Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Disabling it can reduce the system's vulnerability t...
    Group
    Show

  • Disable Avahi Server Software

    The avahi-daemon service can be disabled with the following command: 
    $ sudo systemctl mask --now avahi-daemon.service
    Rule Medium Severity
    Show

  • Cron and At Daemons

    The cron and at services are used to allow commands to be executed at a later time. The cron service is required by almost all systems to perform n...
    Group
    Show

  • Enable cron Service

    The <code>crond</code> service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary mainte...
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.d

    To properly set the group owner of /etc/cron.d, run the command: 
    $ sudo chgrp root /etc/cron.d
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.daily

    To properly set the group owner of /etc/cron.daily, run the command: 
    $ sudo chgrp root /etc/cron.daily
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.hourly

    To properly set the group owner of /etc/cron.hourly, run the command: 
    $ sudo chgrp root /etc/cron.hourly
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.monthly

    To properly set the group owner of /etc/cron.monthly, run the command: 
    $ sudo chgrp root /etc/cron.monthly
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.weekly

    To properly set the group owner of /etc/cron.weekly, run the command: 
    $ sudo chgrp root /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Group Who Owns Crontab

    To properly set the group owner of /etc/crontab, run the command: 
    $ sudo chgrp root /etc/crontab
    Rule Medium Severity
    Show

  • Verify Owner on cron.d

    To properly set the owner of /etc/cron.d, run the command: 
    $ sudo chown root /etc/cron.d
    Rule Medium Severity
    Show

  • Verify Owner on cron.daily

    To properly set the owner of /etc/cron.daily, run the command: 
    $ sudo chown root /etc/cron.daily
    Rule Medium Severity
    Show

  • Verify Owner on cron.hourly

    To properly set the owner of /etc/cron.hourly, run the command: 
    $ sudo chown root /etc/cron.hourly
    Rule Medium Severity
    Show

  • Verify Owner on cron.monthly

    To properly set the owner of /etc/cron.monthly, run the command: 
    $ sudo chown root /etc/cron.monthly
    Rule Medium Severity
    Show

  • Verify Owner on cron.weekly

    To properly set the owner of /etc/cron.weekly, run the command: 
    $ sudo chown root /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Owner on crontab

    To properly set the owner of /etc/crontab, run the command: 
    $ sudo chown root /etc/crontab
    Rule Medium Severity
    Show

  • Verify Permissions on cron.d

    To properly set the permissions of /etc/cron.d, run the command: 
    $ sudo chmod 0700 /etc/cron.d
    Rule Medium Severity
    Show

  • Verify Permissions on cron.daily

    To properly set the permissions of /etc/cron.daily, run the command: 
    $ sudo chmod 0700 /etc/cron.daily
    Rule Medium Severity
    Show

  • Verify Permissions on cron.hourly

    To properly set the permissions of /etc/cron.hourly, run the command: 
    $ sudo chmod 0700 /etc/cron.hourly
    Rule Medium Severity
    Show

  • Verify Permissions on cron.monthly

    To properly set the permissions of /etc/cron.monthly, run the command: 
    $ sudo chmod 0700 /etc/cron.monthly
    Rule Medium Severity
    Show

  • Verify Permissions on cron.weekly

    To properly set the permissions of /etc/cron.weekly, run the command: 
    $ sudo chmod 0700 /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Permissions on crontab

    To properly set the permissions of /etc/crontab, run the command: 
    $ sudo chmod 0600 /etc/crontab
    Rule Medium Severity
    Show

  • Restrict at and cron to Authorized Users if Necessary

    The <code>/etc/cron.allow</code> and <code>/etc/at.allow</code> files contain lists of users who are allowed to use <code>cron</code> and at to del...
    Group
    Show

  • Ensure that /etc/at.deny does not exist

    The file /etc/at.deny should not exist. Use /etc/at.allow instead.
    Rule Medium Severity
    Show

  • Ensure that /etc/cron.deny does not exist

    The file /etc/cron.deny should not exist. Use /etc/cron.allow instead.
    Rule Medium Severity
    Show

  • Verify Group Who Owns /etc/at.allow file

    If <code>/etc/at.allow</code> exists, it must be group-owned by <code>root</code>. To properly set the group owner of <code>/etc/at.allow</code>, ...
    Rule Medium Severity
    Show

  • Verify Group Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be group-owned by <code>root</code>. To properly set the group owner of <code>/etc/cron.allow</cod...
    Rule Medium Severity
    Show

  • Verify User Who Owns /etc/at.allow file

    If <code>/etc/at.allow</code> exists, it must be owned by <code>root</code>. To properly set the owner of <code>/etc/at.allow</code>, run the comm...
    Rule Medium Severity
    Show

  • Verify User Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be owned by <code>root</code>. To properly set the owner of <code>/etc/cron.allow</code>, run the ...
    Rule Medium Severity
    Show

  • Verify Permissions on /etc/at.allow file

    If <code>/etc/at.allow</code> exists, it must have permissions <code>0640</code> or more restrictive. To properly set the permissions of <code>/e...
    Rule Medium Severity
    Show

  • Verify Permissions on /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must have permissions <code>0640</code> or more restrictive. To properly set the permissions of <code>...
    Rule Medium Severity
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server....
    Group
    Show

  • Disable DHCP Server

    The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not n...
    Group
    Show

  • Disable DHCP Service

    The <code>dhcpd</code> service should be disabled on any system that does not need to act as a DHCP server. The <code>dhcpd</code> service can be ...
    Rule Medium Severity
    Show

  • DNS Server

    Most organizations have an operational need to run at least one nameserver. However, there are many common attacks involving DNS server software, a...
    Group
    Show

  • Disable DNS Server

    DNS software should be disabled on any systems which does not need to be a nameserver. Note that the BIND DNS server software is not installed on o...
    Group
    Show

  • Disable named Service

    The named service can be disabled with the following command: 
    $ sudo systemctl mask --now named.service
    Rule Medium Severity
    Show

  • FTP Server

    FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data...
    Group
    Show

  • Remove ftp Package

    FTP (File Transfer Protocol) is a traditional and widely used standard tool for transferring files between a server and clients over a network, esp...
    Rule Low Severity
    Show

  • Web Server

    The web server is responsible for providing access to content via the HTTP protocol. Web servers represent a significant security risk because: <br...
    Group
    Show

  • Disable Apache if Possible

    If Apache was installed and activated, but the system does not need to act as a web server, then it should be disabled and removed from the system.
    Group
    Show

  • Uninstall httpd Package

    The httpd package can be removed with the following command: 
    $ sudo dnf erase httpd
    Rule Unknown Severity
    Show

  • LDAP

    LDAP is a popular directory service, that is, a standardized way of looking up information from a central database. openEuler 2203 includes softwar...
    Group
    Show

  • Configure OpenLDAP Clients

    This section provides information on which security settings are important to configure in OpenLDAP clients by manually editing the appropriate con...
    Group
    Show

  • Ensure LDAP client is not installed

    The Lightweight Directory Access Protocol (LDAP) is a service that provides a method for looking up information from a central database. The <code>...
    Rule Low Severity
    Show

  • Configure OpenLDAP Server

    This section details some security-relevant settings for an OpenLDAP server.
    Group
    Show

  • Uninstall openldap-servers Package

    The openldap-servers package is not installed by default on a openEuler 2203 system. It is needed only by the OpenLDAP server, not by the clients w...
    Rule Low Severity
    Show

  • NFS and RPC

    The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circ...
    Group
    Show

  • Disable All NFS Services if Possible

    If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable sub...
    Group
    Show

  • Disable Services Used Only by NFS

    If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd. <br> <br> All of these daemons run with elevated priv...
    Group
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules