ANSSI-BP-028 (intermediary)
Rules and Groups employed by this XCCDF Profile
-
IPv6
The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the numb...Group -
Configure IPv6 Settings if Necessary
A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from ...Group -
Kernel Parameters Which Affect Networking
The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...Group -
Network Related Kernel Runtime Parameters for Hosts and Routers
Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...Group -
Disable Accepting Packets Routed Between Local Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net...Rule Medium Severity -
Configure ARP filtering for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.arp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...Rule Medium Severity -
Configure Response Mode of ARP Requests for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.arp_ignore</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...Rule Medium Severity -
Prevent Routing External Traffic to Local Loopback on All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.route_localnet</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w n...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects by Default
To set the runtime status of the <code>net.ipv4.conf.default.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Network Parameters for Hosts Only
If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network ...Group -
nftables
<code>If firewalld or iptables are being used in your environment, please follow the guidance in their respective section and pass-over the guidanc...Group -
File Permissions and Masks
Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...Group -
Verify Permissions on Important Files and Directories
Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses impo...Group -
Verify that All World-Writable Directories Have Sticky Bits Set
When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky b...Rule Medium Severity -
Ensure No World-Writable Files Exist
It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific a...Rule Medium Severity -
Enable Kernel Parameter to Enforce DAC on Hardlinks
To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protecte...Rule Medium Severity -
Enable Kernel Parameter to Enforce DAC on Symlinks
To set the runtime status of the <code>fs.protected_symlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected...Rule Medium Severity -
Verify Permissions on Files with Local Account Information and Credentials
The default restrictive permissions for files which act as important security databases such as <code>passwd</code>, <code>shadow</code>, <code>gro...Group -
Verify Group Who Owns group File
To properly set the group owner of/etc/group, run the command:$ sudo chgrp root /etc/group
Rule Medium Severity -
Verify Group Who Owns gshadow File
To properly set the group owner of/etc/gshadow, run the command:$ sudo chgrp shadow /etc/gshadow
Rule Medium Severity -
Verify Group Who Owns passwd File
To properly set the group owner of/etc/passwd, run the command:$ sudo chgrp root /etc/passwd
Rule Medium Severity -
Verify Group Who Owns shadow File
To properly set the group owner of/etc/shadow, run the command:$ sudo chgrp shadow /etc/shadow
Rule Medium Severity -
Verify User Who Owns group File
To properly set the owner of/etc/group, run the command:$ sudo chown root /etc/group
Rule Medium Severity -
Verify User Who Owns gshadow File
To properly set the owner of/etc/gshadow, run the command:$ sudo chown root /etc/gshadow
Rule Medium Severity -
Verify User Who Owns passwd File
To properly set the owner of/etc/passwd, run the command:$ sudo chown root /etc/passwd
Rule Medium Severity -
Verify User Who Owns shadow File
To properly set the owner of/etc/shadow, run the command:$ sudo chown root /etc/shadow
Rule Medium Severity -
Verify Permissions on group File
To properly set the permissions of/etc/group, run the command:$ sudo chmod 0644 /etc/group
Rule Medium Severity -
Verify Permissions on gshadow File
To properly set the permissions of/etc/gshadow, run the command:$ sudo chmod 0640 /etc/gshadow
Rule Medium Severity -
Verify Permissions on passwd File
To properly set the permissions of/etc/passwd, run the command:$ sudo chmod 0644 /etc/passwd
Rule Medium Severity -
Verify Permissions on shadow File
To properly set the permissions of/etc/shadow, run the command:$ sudo chmod 0640 /etc/shadow
Rule Medium Severity -
Verify File Permissions Within Some Important Directories
Some directories contain files whose confidentiality or integrity is notably important and may also be susceptible to misconfiguration over time, p...Group -
Verify that System Executables Have Root Ownership
System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/libexec /usr/local/bin /usr/local/sbin /usr/sb...Rule Medium Severity -
Verify that System Executables Have Restrictive Permissions
System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/libexec /usr/local/bin /usr/local/sbin /usr/sb...Rule Medium Severity -
Restrict Partition Mount Options
System partitions can be mounted with certain options that limit what files on those partitions can do. These options are set in the <code>/etc/fst...Group -
Restrict Programs from Dangerous Execution Patterns
The recommendations in this section are designed to ensure that the system's features to protect against potentially dangerous program execution ar...Group -
Kernel panic on oops
To set the runtime status of the <code>kernel.panic_on_oops</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.panic_...Rule Medium Severity -
Disable Core Dumps
A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases,...Group -
Disable Core Dumps for SUID programs
To set the runtime status of the <code>fs.suid_dumpable</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.suid_dumpable=...Rule Medium Severity -
Enable ExecShield
ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These featu...Group -
Restrict Exposed Kernel Pointer Addresses Access
To set the runtime status of the <code>kernel.kptr_restrict</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.kptr_r...Rule Medium Severity -
Enable Randomized Layout of Virtual Address Space
To set the runtime status of the <code>kernel.randomize_va_space</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.r...Rule Medium Severity -
Memory Poisoning
Memory Poisoning consists of writing a special value to uninitialized or freed memory. Poisoning can be used as a mechanism to prevent leak of info...Group -
SELinux
SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that p...Group -
SELinux - Booleans
Enable or Disable runtime customization of SELinux system policies without having to reload or recompile the SELinux policy.Group -
Services
The best protection against vulnerable software is running less software. This section describes how to review the software which Debian 12 install...Group -
DHCP
The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server....Group -
Disable DHCP Server
The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not n...Group -
Mail Server Software
Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious target...Group -
Configure SMTP For Mail Clients
This section discusses settings for Postfix in a submission-only e-mail configuration.Group
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.