ANSSI-BP-028 (high)
Rules and Groups employed by this XCCDF Profile
-
Emulate Privileged Access Never (PAN)
Enabling this option prevents the kernel from accessing user-space memory directly by pointing TTBR0_EL1 to a reserved zeroed area and reserved ASI...Rule Medium Severity -
Trigger a kernel BUG when data corruption is detected
This option makes the kernel BUG when it encounters data corruption in kernel memory structures when they get checked for validity. This configurat...Rule Low Severity -
Warn on W+X mappings found at boot
Generate a warning if any W+X mappings are found at boot. This configuration is available from kernel 5.8. The configuration that was used to buil...Rule Medium Severity -
Harden common str/mem functions against buffer overflows
Detect overflows of buffers in common string and memory functions where the compiler can determine and validate the buffer sizes. This configuratio...Rule Medium Severity -
Harden memory copies between kernel and userspace
This option checks for obviously wrong memory regions when copying memory to/from the kernel (via copy_to_user() and copy_from_user() functions) by...Rule High Severity -
Do not allow usercopy whitelist violations to fallback to object size
This is a temporary option that allows missing usercopy whitelists to be discovered via a WARN() to the kernel log, instead of rejecting the copy, ...Rule High Severity -
Disable vsyscall emulation
The kernel traps and emulates calls into the fixed vsyscall address mapping. This configuration is available from kernel 5.3, but may be available ...Rule Medium Severity -
Disable vsyscall mapping
This config disables the vsyscall mapping at all. Attempts to use the vsyscalls will be reported to dmesg, so that either old or malicious userspac...Rule Medium Severity -
Disable vsyscall emulate execution only
The kernel traps and emulates calls into the fixed vsyscall address mapping and does not allow reads. This configuration is available from kernel 5...Rule Medium Severity -
Disable the LDT (local descriptor table)
Linux can allow user programs to install a per-process x86 Local Descriptor Table (LDT) using the modify_ldt(2) system call. This is required to ru...Rule Medium Severity -
Enable poison of pages after freeing
Fill the pages with poison patterns after free_pages() and verify the patterns before alloc_pages. This does have a potential performance impact if...Rule Medium Severity -
Perform full reference count validation
Enabling this switches the refcounting infrastructure from a fast unchecked atomic_t implementation to a fully state checked implementation, which ...Rule Medium Severity -
Detect stack corruption on calls to schedule()
This option checks for a stack overrun on calls to schedule(). If the stack end location is found to be overwritten always panic as the content of ...Rule Medium Severity -
Harden slab freelist metadata
This feature protects integrity of the allocator's metadata. This configuration is available from kernel 4.14. The configuration that was used to ...Rule Medium Severity -
Randomize slab freelist
Randomizes the freelist order used on creating new pages. This configuration is available from kernel 5.9, but may be available if backported by di...Rule Medium Severity -
Disallow merge of slab caches
For reduced kernel memory fragmentation, slab caches can be merged when they share the same size and other characteristics. This carries a risk of ...Rule Medium Severity -
Stack Protector buffer overlow detection
This feature puts, at the beginning of functions, a canary value on the stack just before the return address, and validates the value just before a...Rule Medium Severity -
Strong Stack Protector
This features adds canary logic protection to more kinds of vulnerable functions than CONFIG_STACKPROTECTOR, but not to all functions so that perfo...Rule Medium Severity -
Make the kernel text and rodata read-only
When set, kernel text and rodata memory will be made read-only, and non-text memory will be made non-executable. This configuration is available fr...Rule Medium Severity -
Make the module text and rodata read-only
When set, module text and rodata memory will be made read-only, and non-text memory will be made non-executable. This configuration is available fr...Rule Medium Severity -
User a virtually-mapped stack
Enable this to use virtually-mapped kernel stacks with guard pages. This configuration is available from kernel 4.9. The configuration that was us...Rule Medium Severity -
Generate some entropy during boot and runtime
Instrument some kernel code to extract some entropy from both original and artificially created program state. This will help especially embedded s...Rule Medium Severity -
Randomize layout of sensitive kernel structures
Randomize at compile-time the layouts of structures that are entirely function pointers (and have not been manually annotated with __no_randomize_l...Rule Medium Severity -
Poison kernel stack before returning from syscalls
This option makes the kernel erase the kernel stack before returning from system calls. This has the effect of leaving the stack initialized to the...Rule Medium Severity -
Force initialization of variables containing userspace addresses
While the kernel is built with warnings enabled for any missed stack variable initializations, this warning is silenced for anything passed by refe...Rule Medium Severity -
zero-init everything passed by reference
Zero-initialize any stack variables that may be passed by reference and had not already been explicitly initialized. This configuration is availabl...Rule Medium Severity -
Ensure rsyslog-gnutls is installed
TLS protocol support for rsyslog is installed. The <code>rsyslog-gnutls</code> package can be installed with the following command: <pre> $ apt-ge...Rule Medium Severity -
Enable logrotate Timer
Thelogrotatetimer can be enabled with the following command:$ sudo systemctl enable logrotate.timer
Rule Medium Severity -
Configure TLS for rsyslog remote logging
Configure <code>rsyslog</code> to use Transport Layer Security (TLS) support for logging to remote server for the Forwarding Output Module in <code...Rule Medium Severity -
Configure CA certificate for rsyslog remote logging
Configure CA certificate for <code>rsyslog</code> logging to remote server using Transport Layer Security (TLS) using correct path for the <code>De...Rule Medium Severity -
Verify Group Who Owns /etc/ipsec.d Directory
To properly set the group owner of/etc/ipsec.d, run the command:$ sudo chgrp root /etc/ipsec.d
Rule Medium Severity -
Verify User Who Owns /etc/ipsec.d Directory
To properly set the owner of/etc/ipsec.d, run the command:$ sudo chown root /etc/ipsec.d
Rule Medium Severity -
Verify Permissions On /etc/ipsec.d Directory
To properly set the permissions of/etc/ipsec.d, run the command:$ sudo chmod 0700 /etc/ipsec.d
Rule Medium Severity -
Verify Group Who Owns /etc/ipsec.conf File
To properly set the group owner of/etc/ipsec.conf, run the command:$ sudo chgrp root /etc/ipsec.conf
Rule Medium Severity -
Verify Group Who Owns /etc/ipsec.secrets File
To properly set the group owner of/etc/ipsec.secrets, run the command:$ sudo chgrp root /etc/ipsec.secrets
Rule Medium Severity -
Verify User Who Owns /etc/ipsec.conf File
To properly set the owner of/etc/ipsec.conf, run the command:$ sudo chown root /etc/ipsec.conf
Rule Medium Severity -
Verify User Who Owns /etc/ipsec.secrets File
To properly set the owner of/etc/ipsec.secrets, run the command:$ sudo chown root /etc/ipsec.secrets
Rule Medium Severity -
Verify Permissions On /etc/ipsec.conf File
To properly set the permissions of/etc/ipsec.conf, run the command:$ sudo chmod 0644 /etc/ipsec.conf
Rule Medium Severity -
Verify Permissions On /etc/ipsec.secrets File
To properly set the permissions of/etc/ipsec.secrets, run the command:$ sudo chmod 0644 /etc/ipsec.secrets
Rule Medium Severity -
Verify Group Who Owns /etc/iptables Directory
To properly set the group owner of/etc/iptables, run the command:$ sudo chgrp root /etc/iptables
Rule Medium Severity -
Verify User Who Owns /etc/iptables Directory
To properly set the owner of/etc/iptables, run the command:$ sudo chown root /etc/iptables
Rule Medium Severity -
Verify Permissions On /etc/iptables Directory
To properly set the permissions of/etc/iptables, run the command:$ sudo chmod 0600 /etc/iptables
Rule Medium Severity -
Configure Accepting Default Router in Router Advertisements on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_ra_defrtr</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Unknown Severity -
Configure Accepting Prefix Information in Router Advertisements on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_ra_pinfo</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ...Rule Unknown Severity -
Configure Accepting Router Preference in Router Advertisements on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_ra_rtr_pref</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Unknown Severity -
Disable Accepting ICMP Redirects for All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...Rule Medium Severity -
Configure Auto Configuration on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.autoconf</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv...Rule Unknown Severity -
Configure Maximum Number of Autoconfigured Addresses on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.max_addresses</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...Rule Unknown Severity -
Configure Denying Router Solicitations on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.router_solicitations</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Unknown Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.