ANSSI-BP-028 (high)
Rules and Groups employed by this XCCDF Profile
-
Ensure rsyslog is Installed
Rsyslog is installed by default. The <code>rsyslog</code> package can be installed with the following command: <pre> $ apt-get install rsyslog</pre...Rule Medium Severity -
Enable rsyslog Service
The <code>rsyslog</code> service provides syslog-style logging by default on Debian 12. The <code>rsyslog</code> service can be enabled with the f...Rule Medium Severity -
Ensure Proper Configuration of Log Files
The file <code>/etc/rsyslog.conf</code> controls where log message are written. These are controlled by lines called <i>rules</i>, which consist of...Group -
Ensure Log Files Are Owned By Appropriate Group
The group-owner of all log files written by <code>rsyslog</code> should be <code>adm</code>. These log files are determined by the second part of e...Rule Medium Severity -
Ensure Log Files Are Owned By Appropriate User
The owner of all log files written by <code>rsyslog</code> should be <code>adm</code>. These log files are determined by the second part of each ...Rule Medium Severity -
Ensure System Log Files Have Correct Permissions
The file permissions for all log files written by <code>rsyslog</code> should be set to 640, or more restrictive. These log files are determined by...Rule Medium Severity -
Ensure All Logs are Rotated by logrotate
Edit the file <code>/etc/logrotate.d/syslog</code>. Find the first line, which should look like this (wrapped for clarity): <pre>/var/log/message...Group -
Ensure logrotate is Installed
logrotate is installed by default. The <code>logrotate</code> package can be installed with the following command: <pre> $ apt-get install logrotat...Rule Medium Severity -
Ensure Logrotate Runs Periodically
The <code>logrotate</code> utility allows for the automatic rotation of log files. The frequency of rotation is specified in <code>/etc/logrotate....Rule Medium Severity -
Rsyslog Logs Sent To Remote Host
If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised...Group -
Ensure Logs Sent To Remote Host
To configure rsyslog to send logs to a remote log server, open <code>/etc/rsyslog.conf</code> and read and understand the last section of the file,...Rule Medium Severity -
Network Configuration and Firewalls
Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses th...Group -
IPSec Support
Support for Internet Protocol Security (IPsec) is provided with Libreswan.Group -
iptables and ip6tables
A host-based firewall called <code>netfilter</code> is included as part of the Linux kernel distributed with the system. It is activated by default...Group -
IPv6
The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the numb...Group -
Configure IPv6 Settings if Necessary
A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from ...Group -
Kernel Parameters Which Affect Networking
The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...Group -
Network Related Kernel Runtime Parameters for Hosts and Routers
Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...Group -
Disable Accepting Packets Routed Between Local Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_local</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net...Rule Medium Severity -
Configure ARP filtering for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.arp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...Rule Medium Severity -
Configure Response Mode of ARP Requests for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.arp_ignore</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...Rule Medium Severity -
Prevent Routing External Traffic to Local Loopback on All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.route_localnet</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w n...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net...Rule Medium Severity -
Configure Sending and Accepting Shared Media Redirects by Default
To set the runtime status of the <code>net.ipv4.conf.default.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Network Parameters for Hosts Only
If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network ...Group -
nftables
<code>If firewalld or iptables are being used in your environment, please follow the guidance in their respective section and pass-over the guidanc...Group -
File Permissions and Masks
Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...Group -
Verify Permissions on Important Files and Directories
Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses impo...Group -
Verify that All World-Writable Directories Have Sticky Bits Set
When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky b...Rule Medium Severity -
Verify Permissions on System.map Files
The System.map files are symbol map files generated during the compilation of the Linux kernel. They contain the mapping between kernel symbols and...Rule Low Severity -
Ensure No World-Writable Files Exist
It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific a...Rule Medium Severity -
Enable Kernel Parameter to Enforce DAC on Hardlinks
To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protecte...Rule Medium Severity -
Enable Kernel Parameter to Enforce DAC on Symlinks
To set the runtime status of the <code>fs.protected_symlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected...Rule Medium Severity -
Verify Permissions on Files with Local Account Information and Credentials
The default restrictive permissions for files which act as important security databases such as <code>passwd</code>, <code>shadow</code>, <code>gro...Group -
Verify Group Who Owns group File
To properly set the group owner of/etc/group, run the command:$ sudo chgrp root /etc/group
Rule Medium Severity -
Verify Group Who Owns gshadow File
To properly set the group owner of/etc/gshadow, run the command:$ sudo chgrp shadow /etc/gshadow
Rule Medium Severity -
Verify Group Who Owns passwd File
To properly set the group owner of/etc/passwd, run the command:$ sudo chgrp root /etc/passwd
Rule Medium Severity -
Verify Group Who Owns shadow File
To properly set the group owner of/etc/shadow, run the command:$ sudo chgrp shadow /etc/shadow
Rule Medium Severity -
Verify User Who Owns group File
To properly set the owner of/etc/group, run the command:$ sudo chown root /etc/group
Rule Medium Severity -
Verify User Who Owns gshadow File
To properly set the owner of/etc/gshadow, run the command:$ sudo chown root /etc/gshadow
Rule Medium Severity -
Verify User Who Owns passwd File
To properly set the owner of/etc/passwd, run the command:$ sudo chown root /etc/passwd
Rule Medium Severity -
Verify User Who Owns shadow File
To properly set the owner of/etc/shadow, run the command:$ sudo chown root /etc/shadow
Rule Medium Severity -
Verify Permissions on group File
To properly set the permissions of/etc/group, run the command:$ sudo chmod 0644 /etc/group
Rule Medium Severity -
Verify Permissions on gshadow File
To properly set the permissions of/etc/gshadow, run the command:$ sudo chmod 0640 /etc/gshadow
Rule Medium Severity -
Verify Permissions on passwd File
To properly set the permissions of/etc/passwd, run the command:$ sudo chmod 0644 /etc/passwd
Rule Medium Severity -
Verify Permissions on shadow File
To properly set the permissions of/etc/shadow, run the command:$ sudo chmod 0640 /etc/shadow
Rule Medium Severity -
Verify File Permissions Within Some Important Directories
Some directories contain files whose confidentiality or integrity is notably important and may also be susceptible to misconfiguration over time, p...Group -
Verify that System Executables Have Root Ownership
System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/libexec /usr/local/bin /usr/local/sbin /usr/sb...Rule Medium Severity -
Verify that System Executables Have Restrictive Permissions
System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/libexec /usr/local/bin /usr/local/sbin /usr/sb...Rule Medium Severity -
Restrict Partition Mount Options
System partitions can be mounted with certain options that limit what files on those partitions can do. These options are set in the <code>/etc/fst...Group
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.