DISA STIG for Red Hat Enterprise Linux 8
Rules and Groups employed by this XCCDF Profile
-
Ensure remote access methods are monitored in Rsyslog
Logging of remote access methods must be implemented to help identify cyber attacks and ensure ongoing compliance with remote access policies are b...Rule Medium Severity -
Rsyslog Logs Sent To Remote Host
If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised...Group -
Ensure Logs Sent To Remote Host
To configure rsyslog to send logs to a remote log server, open <code>/etc/rsyslog.conf</code> and read and understand the last section of the file,...Rule Medium Severity -
Network Configuration and Firewalls
Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses th...Group -
Configure Multiple DNS Servers in /etc/resolv.conf
Determine whether the system is using local or DNS name resolution with the following command: <pre>$ sudo grep hosts /etc/nsswitch.conf hosts: fi...Rule Medium Severity -
Ensure System is Not Acting as a Network Sniffer
The system should not be acting as a network sniffer, which can capture all traffic on the network to which it is connected. Run the following to d...Rule Medium Severity -
firewalld
The dynamic firewall daemon <code>firewalld</code> provides a dynamically managed firewall with support for network “zones” to assign a level of tr...Group -
Configure Firewalld to Use the Nftables Backend
Firewalld can be configured with many backends, such as nftables.Rule Medium Severity -
Inspect and Activate Default firewalld Rules
Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffi...Group -
Install firewalld Package
Thefirewalldpackage can be installed with the following command:$ sudo yum install firewalld
Rule Medium Severity -
Verify firewalld Enabled
Thefirewalldservice can be enabled with the following command:$ sudo systemctl enable firewalld.service
Rule Medium Severity -
Strengthen the Default Ruleset
The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in configuration files under t...Group -
Configure the Firewalld Ports
Configure the <code>firewalld</code> ports to allow approved services to have access to the system. To configure <code>firewalld</code> to open por...Rule Medium Severity -
Firewalld Must Employ a Deny-all, Allow-by-exception Policy for Allowing Connections to Other Systems
Red Hat Enterprise Linux 8 incorporates the "firewalld" daemon, which allows for many different configurations. One of these configurations is zone...Rule Medium Severity -
Set Default firewalld Zone for Incoming Packets
To set the default zone to <code>drop</code> for the built-in default zone which processes incoming IPv4 and IPv6 packets, modify the following lin...Rule Medium Severity -
IPv6
The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the numb...Group -
Configure IPv6 Settings if Necessary
A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from ...Group -
Configure Accepting Router Advertisements on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...Rule Medium Severity -
Disable Accepting ICMP Redirects for All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...Rule Medium Severity -
Disable Kernel Parameter for IPv6 Forwarding
To set the runtime status of the <code>net.ipv6.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...Rule Medium Severity -
Disable Accepting Router Advertisements on all IPv6 Interfaces by Default
To set the runtime status of the <code>net.ipv6.conf.default.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...Rule Medium Severity -
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default
To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Kernel Parameters Which Affect Networking
The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...Group -
Network Related Kernel Runtime Parameters for Hosts and Routers
Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...Group -
Disable Accepting ICMP Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...Rule Medium Severity -
Disable Kernel Parameter for IPv4 Forwarding on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...Rule Medium Severity -
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...Rule Medium Severity -
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.icmp_echo_ignore_broadcasts</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Network Parameters for Hosts Only
If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network ...Group -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w n...Rule Medium Severity -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Uncommon Network Protocols
The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code ...Group -
Disable ATM Support
The Asynchronous Transfer Mode (ATM) is a protocol operating on network, data link, and physical layers, based on virtual circuits and virtual path...Rule Medium Severity -
Disable CAN Support
The Controller Area Network (CAN) is a serial communications protocol which was initially developed for automotive and is now also used in marine, ...Rule Medium Severity -
Disable IEEE 1394 (FireWire) Support
The IEEE 1394 (FireWire) is a serial bus standard for high-speed real-time communication. To configure the system to prevent the <code>firewire-co...Rule Low Severity -
Disable SCTP Support
The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with...Rule Medium Severity -
Disable TIPC Support
The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the sys...Rule Low Severity -
Wireless Networking
Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless net...Group -
Disable Wireless Through Software Configuration
If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following ...Group -
Disable Bluetooth Kernel Module
The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate <code>/etc/mo...Rule Medium Severity -
Deactivate Wireless Network Interfaces
Deactivating wireless network interfaces should prevent normal usage of the wireless capability. <br><br> Configure the system to disable all wire...Rule Medium Severity -
File Permissions and Masks
Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...Group -
Verify Permissions on Important Files and Directories
Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses impo...Group -
Ensure All World-Writable Directories Are Owned by root User
All directories in local partitions which are world-writable should be owned by root. If any world-writable directories are not owned by root, this...Rule Medium Severity -
Verify that All World-Writable Directories Have Sticky Bits Set
When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky b...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.