Unclassified Information in Non-federal Information Systems and Organizations (NIST 800-171)
Rules and Groups employed by this XCCDF Profile
-
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default
To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Kernel Parameters Which Affect Networking
The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...Group -
Network Related Kernel Runtime Parameters for Hosts and Routers
Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...Group -
Disable Accepting ICMP Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...Rule Medium Severity -
Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net...Rule Unknown Severity -
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...Rule Medium Severity -
Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Unknown Severity -
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...Rule Medium Severity -
Configure Kernel Parameter for Accepting Secure Redirects By Default
To set the runtime status of the <code>net.ipv4.conf.default.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.icmp_echo_ignore_broadcasts</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.icmp_ignore_bogus_error_responses</code> kernel parameter, run the following command: <pre>$ sudo s...Rule Unknown Severity -
Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces
To set the runtime status of the <code>net.ipv4.tcp_syncookies</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.t...Rule Medium Severity -
Network Parameters for Hosts Only
If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network ...Group -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w n...Rule Medium Severity -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.ip_forward</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.ip_fo...Rule Medium Severity -
Uncommon Network Protocols
The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code ...Group -
Disable ATM Support
The Asynchronous Transfer Mode (ATM) is a protocol operating on network, data link, and physical layers, based on virtual circuits and virtual path...Rule Medium Severity -
Disable CAN Support
The Controller Area Network (CAN) is a serial communications protocol which was initially developed for automotive and is now also used in marine, ...Rule Medium Severity -
Disable IEEE 1394 (FireWire) Support
The IEEE 1394 (FireWire) is a serial bus standard for high-speed real-time communication. To configure the system to prevent the <code>firewire-co...Rule Low Severity -
Disable SCTP Support
The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with...Rule Medium Severity -
Disable TIPC Support
The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the sys...Rule Low Severity -
Wireless Networking
Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless net...Group -
Disable Wireless Through Software Configuration
If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following ...Group -
Disable Bluetooth Kernel Module
The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate <code>/etc/mo...Rule Medium Severity -
File Permissions and Masks
Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...Group -
Verify Permissions on Important Files and Directories
Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses impo...Group -
Enable Kernel Parameter to Enforce DAC on Hardlinks
To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protecte...Rule Medium Severity -
Enable Kernel Parameter to Enforce DAC on Symlinks
To set the runtime status of the <code>fs.protected_symlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected...Rule Medium Severity -
Restrict Dynamic Mounting and Unmounting of Filesystems
Linux includes a number of facilities for the automated addition and removal of filesystems on a running system. These facilities may be necessary...Group -
Disable Mounting of cramfs
To configure the system to prevent the <code>cramfs</code> kernel module from being loaded, add the following line to the file <code>/etc/modprobe...Rule Low Severity -
Restrict Partition Mount Options
System partitions can be mounted with certain options that limit what files on those partitions can do. These options are set in the <code>/etc/fst...Group -
Add nodev Option to /boot
The <code>nodev</code> mount option can be used to prevent device files from being created in <code>/boot</code>. Legitimate character and block de...Rule Medium Severity -
Add nosuid Option to /boot
The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/boot</code>. The SUID and SGID permissions shoul...Rule Medium Severity -
Add nodev Option to /dev/shm
The <code>nodev</code> mount option can be used to prevent creation of device files in <code>/dev/shm</code>. Legitimate character and block device...Rule Medium Severity -
Add noexec Option to /dev/shm
The <code>noexec</code> mount option can be used to prevent binaries from being executed out of <code>/dev/shm</code>. It can be dangerous to allow...Rule Medium Severity -
Add nosuid Option to /dev/shm
The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/dev/shm</code>. The SUID and SGID permissions s...Rule Medium Severity -
Add nodev Option to /home
The <code>nodev</code> mount option can be used to prevent device files from being created in <code>/home</code>. Legitimate character and block de...Rule Unknown Severity -
Add nosuid Option to /home
The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/home</code>. The SUID and SGID permissions shoul...Rule Medium Severity -
Add nodev Option to Non-Root Local Partitions
The <code>nodev</code> mount option prevents files from being interpreted as character or block devices. Legitimate character and block devices sho...Rule Medium Severity -
Add nodev Option to /tmp
The <code>nodev</code> mount option can be used to prevent device files from being created in <code>/tmp</code>. Legitimate character and block dev...Rule Medium Severity -
Add noexec Option to /tmp
The <code>noexec</code> mount option can be used to prevent binaries from being executed out of <code>/tmp</code>. Add the <code>noexec</code> opti...Rule Medium Severity -
Add nosuid Option to /tmp
The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/tmp</code>. The SUID and SGID permissions should...Rule Medium Severity -
Add nodev Option to /var/log/audit
The <code>nodev</code> mount option can be used to prevent device files from being created in <code>/var/log/audit</code>. Legitimate character and...Rule Medium Severity -
Add noexec Option to /var/log/audit
The <code>noexec</code> mount option can be used to prevent binaries from being executed out of <code>/var/log/audit</code>. Add the <code>noexec</...Rule Medium Severity -
Add nosuid Option to /var/log/audit
The <code>nosuid</code> mount option can be used to prevent execution of setuid programs in <code>/var/log/audit</code>. The SUID and SGID permissi...Rule Medium Severity
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.