Skip to content
Log In

ANSSI-BP-028 (intermediary)

Rules and Groups employed by this XCCDF Profile

  • Disable Core Dumps for SUID programs

    To set the runtime status of the <code>fs.suid_dumpable</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.suid_dumpable=0</pre> To make sure that the setting is persisten...
    Rule Medium Severity
    Show

  • Enable ExecShield

    ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These features include random placement of the stack and othe...
    Group
    Show

  • Restrict Exposed Kernel Pointer Addresses Access

    To set the runtime status of the <code>kernel.kptr_restrict</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.kptr_restrict=<xccdf-1.2:sub idref="xccdf_org.ssgproject...
    Rule Medium Severity
    Show

  • Enable Randomized Layout of Virtual Address Space

    To set the runtime status of the <code>kernel.randomize_va_space</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.randomize_va_space=2</pre> To make sure that the se...
    Rule Medium Severity
    Show

  • Memory Poisoning

    Memory Poisoning consists of writing a special value to uninitialized or freed memory. Poisoning can be used as a mechanism to prevent leak of information and detection of corrupted memory.
    Group
    Show

  • Enable page allocator poisoning

    To enable poisoning of free pages, add the argument <code>page_poison=1</code> to the default GRUB 2 command line for the Linux operating system. To ensure that <code>page_poison=1</code> is added ...
    Rule Medium Severity
    Show

  • Enable SLUB/SLAB allocator poisoning

    To enable poisoning of SLUB/SLAB objects, add the argument <code>slub_debug=<xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_slub_debug_options" use="legacy"></xccdf-1.2:sub> ...
    Rule Medium Severity
    Show

  • SELinux

    SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can a...
    Group
    Show

  • Ensure SELinux State is Enforcing

    The SELinux state should be set to <code><xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_selinux_state" use="legacy"></xccdf-1.2:sub></code> at system boot time. In the file <code>/et...
    Rule High Severity
    Show

  • SELinux - Booleans

    Enable or Disable runtime customization of SELinux system policies without having to reload or recompile the SELinux policy.
    Group
    Show

  • Configure the polyinstantiation_enabled SELinux Boolean

    By default, the SELinux boolean <code>polyinstantiation_enabled</code> is disabled. This setting should be configured to <xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_polyinstantiati...
    Rule Medium Severity
    Show

  • Services

    The best protection against vulnerable software is running less software. This section describes how to review the software which Red Hat Enterprise Linux 8 installs on a system and disable softwar...
    Group
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server. <br> <br> This guide recommends confi...
    Group
    Show

  • Disable DHCP Server

    The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled...
    Group
    Show

  • Uninstall DHCP Server Package

    If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The <code>dhcp-server</code> package can be removed with the following command: <pre> $ sudo yum erase dhc...
    Rule Medium Severity
    Show

  • LDAP

    LDAP is a popular directory service, that is, a standardized way of looking up information from a central database. Red Hat Enterprise Linux 8 includes software that enables a system to act as both...
    Group
    Show

  • Configure OpenLDAP Clients

    This section provides information on which security settings are important to configure in OpenLDAP clients by manually editing the appropriate configuration files. Red Hat Enterprise Linux 8 prov...
    Group
    Show

  • Configure LDAP Client to Use TLS For All Transactions

    This check verifies cryptography has been implemented to protect the integrity of remote LDAP authentication sessions. <br> <br> To determine if LDAP is being used for authenticatio...
    Rule Medium Severity
    Show

  • Configure Certificate Directives for LDAP Use of TLS

    Ensure a copy of a trusted CA certificate has been placed in the file <code>/etc/pki/tls/CA/cacert.pem</code>. Configure LDAP to enforce TLS use and to trust certificates signed by that CA. First, ...
    Rule Medium Severity
    Show

  • Mail Server Software

    Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not r...
    Group
    Show

  • Uninstall Sendmail Package

    Sendmail is not the default mail transfer agent and is not installed by default. The <code>sendmail</code> package can be removed with the following command: <pre> $ sudo yum erase sendmail</pre> ...
    Rule Medium Severity
    Show

  • Configure SMTP For Mail Clients

    This section discusses settings for Postfix in a submission-only e-mail configuration.
    Group
    Show

  • Configure System to Forward All Mail For The Root Account

    Make sure that mails delivered to root user are forwarded to a monitored email address. Make sure that the address <xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_postfix_root_mail_ali...
    Rule Medium Severity
    Show

  • Disable Postfix Network Listening

    Edit the file <code>/etc/postfix/main.cf</code> to ensure that only the following <code>inet_interfaces</code> line appears: <pre>inet_interfaces = <xccdf-1.2:sub idref="xccdf_org.ssgproject.conten...
    Rule Medium Severity
    Show

  • Network Time Protocol

    The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can...
    Group
    Show

  • Obsolete Services

    This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best a...
    Group
    Show

  • Xinetd

    The <code>xinetd</code> service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been large...
    Group
    Show

  • Uninstall xinetd Package

    The xinetd package can be removed with the following command: 
    $ sudo yum erase xinetd
    Rule Low Severity
    Show

  • NIS

    The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS...
    Group
    Show

  • Remove NIS Client

    The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system configuration files. The NIS client (<code>ypbind</cod...
    Rule Unknown Severity
    Show

  • Uninstall ypserv Package

    The ypserv package can be removed with the following command: 
    $ sudo yum erase ypserv
    Rule High Severity
    Show

  • Rlogin, Rsh, and Rexec

    The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.
    Group
    Show

  • Uninstall rsh-server Package

    The rsh-server package can be removed with the following command: 
    $ sudo yum erase rsh-server
    Rule High Severity
    Show

  • Uninstall rsh Package

    The rsh package contains the client commands for the rsh services
    Rule Unknown Severity
    Show

  • Chat/Messaging Services

    The talk software makes it possible for users to send and receive messages across systems through a terminal session.
    Group
    Show

  • Uninstall talk-server Package

    The talk-server package can be removed with the following command: 
     $ sudo yum erase talk-server
    Rule Medium Severity
    Show

  • Uninstall talk Package

    The <code>talk</code> package contains the client program for the Internet talk protocol, which allows the user to chat with other users on different systems. Talk is a communication program which ...
    Rule Medium Severity
    Show

  • Telnet

    The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use tel...
    Group
    Show

  • Uninstall telnet-server Package

    The telnet-server package can be removed with the following command: 
    $ sudo yum erase telnet-server
    Rule High Severity
    Show

  • Remove telnet Clients

    The telnet client allows users to start connections to other systems via the telnet protocol.
    Rule Low Severity
    Show

  • TFTP Server

    TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking oper...
    Group
    Show

  • Uninstall tftp-server Package

    The tftp-server package can be removed with the following command: 
     $ sudo yum erase tftp-server
    Rule High Severity
    Show

  • Remove tftp Daemon

    Trivial File Transfer Protocol (TFTP) is a simple file transfer protocol, typically used to automatically transfer configuration or boot files between systems. TFTP does not support authentication ...
    Rule Low Severity
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, throu...
    Group
    Show

  • Verify Group Who Owns SSH Server config file

    To properly set the group owner of /etc/ssh/sshd_config, run the command: 
    $ sudo chgrp root /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Group Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be group-owned by ssh_keys group.
    Rule Medium Severity
    Show

  • Verify Group Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be group-owned by root group.
    Rule Medium Severity
    Show

  • Verify Owner on SSH Server config file

    To properly set the owner of /etc/ssh/sshd_config, run the command: 
    $ sudo chown root /etc/ssh/sshd_config
    Rule Medium Severity
    Show

  • Verify Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be owned by root user.
    Rule Medium Severity
    Show

  • Verify Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be owned by root user.
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules