Skip to content

ANSSI-BP-028 (high)

Rules and Groups employed by this XCCDF Profile

  • NIS

    The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS...
    Group
  • Remove NIS Client

    The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system configuration files. The NIS client (<code>ypbind</cod...
    Rule Unknown Severity
  • Uninstall ypserv Package

    The ypserv package can be removed with the following command:
    $ sudo yum erase ypserv
    Rule High Severity
  • Rlogin, Rsh, and Rexec

    The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.
    Group
  • Uninstall rsh-server Package

    The rsh-server package can be removed with the following command:
    $ sudo yum erase rsh-server
    Rule High Severity
  • Uninstall rsh Package

    The rsh package contains the client commands for the rsh services
    Rule Unknown Severity
  • Chat/Messaging Services

    The talk software makes it possible for users to send and receive messages across systems through a terminal session.
    Group
  • Uninstall talk-server Package

    The talk-server package can be removed with the following command:
     $ sudo yum erase talk-server
    Rule Medium Severity
  • Uninstall talk Package

    The <code>talk</code> package contains the client program for the Internet talk protocol, which allows the user to chat with other users on different systems. Talk is a communication program which ...
    Rule Medium Severity
  • Telnet

    The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use tel...
    Group
  • Uninstall telnet-server Package

    The telnet-server package can be removed with the following command:
    $ sudo yum erase telnet-server
    Rule High Severity
  • Remove telnet Clients

    The telnet client allows users to start connections to other systems via the telnet protocol.
    Rule Low Severity
  • TFTP Server

    TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking oper...
    Group
  • Uninstall tftp-server Package

    The tftp-server package can be removed with the following command:
     $ sudo yum erase tftp-server
    Rule High Severity
  • Remove tftp Daemon

    Trivial File Transfer Protocol (TFTP) is a simple file transfer protocol, typically used to automatically transfer configuration or boot files between systems. TFTP does not support authentication ...
    Rule Low Severity
  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, throu...
    Group
  • Verify Group Who Owns SSH Server config file

    To properly set the group owner of /etc/ssh/sshd_config, run the command:
    $ sudo chgrp root /etc/ssh/sshd_config
    Rule Medium Severity
  • Verify Group Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be group-owned by ssh_keys group.
    Rule Medium Severity
  • Verify Group Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be group-owned by root group.
    Rule Medium Severity
  • Verify Owner on SSH Server config file

    To properly set the owner of /etc/ssh/sshd_config, run the command:
    $ sudo chown root /etc/ssh/sshd_config 
    Rule Medium Severity
  • Verify Ownership on SSH Server Private *_key Key Files

    SSH server private keys, files that match the /etc/ssh/*_key glob, must be owned by root user.
    Rule Medium Severity
  • Verify Ownership on SSH Server Public *.pub Key Files

    SSH server public keys, files that match the /etc/ssh/*.pub glob, must be owned by root user.
    Rule Medium Severity
  • Verify Permissions on SSH Server config file

    To properly set the permissions of /etc/ssh/sshd_config, run the command:
    $ sudo chmod 0600 /etc/ssh/sshd_config
    Rule Medium Severity
  • Verify Permissions on SSH Server Private *_key Key Files

    SSH server private keys - files that match the <code>/etc/ssh/*_key</code> glob, have to have restricted permissions. If those files are owned by the <code>root</code> user and the <code>root</code...
    Rule Medium Severity
  • Verify Permissions on SSH Server Public *.pub Key Files

    To properly set the permissions of /etc/ssh/*.pub, run the command:
    $ sudo chmod 0644 /etc/ssh/*.pub
    Rule Medium Severity
  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_config</code>. The following recommendations can be app...
    Group
  • Disable SSH Root Login

    The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following line in <code>/etc/ssh/sshd_config</code>: <pre>Pe...
    Rule Medium Severity
  • System Security Services Daemon

    The System Security Services Daemon (SSSD) is a system daemon that provides access to different identity and authentication providers such as Red Hat's IdM, Microsoft's AD, openLDAP, MIT Kerberos, ...
    Group
  • Install the SSSD Package

    The sssd package should be installed. The sssd package can be installed with the following command:
    $ sudo yum install sssd
    Rule Medium Severity
  • Enable the SSSD Service

    The SSSD service should be enabled. The sssd service can be enabled with the following command:
    $ sudo systemctl enable sssd.service
    Rule Medium Severity
  • Configure PAM in SSSD Services

    SSSD should be configured to run SSSD <code>pam</code> services. To configure SSSD to known SSH hosts, add <code>pam</code> to <code>services</code> under the <code>[sssd]</code> section in <code>/...
    Rule Medium Severity
  • System Security Services Daemon (SSSD) - LDAP

    The System Security Services Daemon (SSSD) is a system daemon that provides access to different identity and authentication providers such as Red Hat's IdM, Microsoft's AD, openLDAP, MIT Kerberos, ...
    Group
  • Configure SSSD LDAP Backend Client to Demand a Valid Certificate from the Server

    Configure SSSD to demand a valid certificate from the server to protect the integrity of LDAP remote access sessions by setting the <pre>ldap_tls_reqcert</pre> option in <pre>/etc/sssd/sssd.conf</p...
    Rule Medium Severity
  • Configure SSSD LDAP Backend to Use TLS For All Transactions

    The LDAP client should be configured to implement TLS for the integrity of all remote LDAP authentication sessions. If the <code>id_provider</code> is set to <code>ldap</code> or <code>ipa</code> i...
    Rule High Severity
  • Verify Group Who Owns /etc/shells File

    To properly set the group owner of /etc/shells, run the command:
    $ sudo chgrp root /etc/shells
    Rule Medium Severity
  • Verify Who Owns /etc/shells File

    To properly set the owner of /etc/shells, run the command:
    $ sudo chown root /etc/shells 
    Rule Medium Severity
  • Verify Permissions on /etc/shells File

    To properly set the permissions of /etc/shells, run the command:
    $ sudo chmod 0644 /etc/shells
    Rule Medium Severity
  • Ensure tmp.mount Unit Is Enabled

    The <code>/tmp</code> directory is a world-writable directory used for temporary file storage. This directory is managed by <code>systemd-tmpfiles</code>. Ensure that the <code>tmp.mount</code> sys...
    Rule Low Severity
  • Verify Group Who Owns /etc/sudoers.d Directory

    To properly set the group owner of /etc/sudoers.d, run the command:
    $ sudo chgrp root /etc/sudoers.d
    Rule Medium Severity
  • Verify User Who Owns /etc/sudoers.d Directory

    To properly set the owner of /etc/sudoers.d, run the command:
    $ sudo chown root /etc/sudoers.d 
    Rule Medium Severity
  • Verify Permissions On /etc/sudoers.d Directory

    To properly set the permissions of /etc/sudoers.d, run the command:
    $ sudo chmod 0750 /etc/sudoers.d
    Rule Medium Severity
  • Verify Group Who Owns /etc/sudoers File

    To properly set the group owner of /etc/sudoers, run the command:
    $ sudo chgrp root /etc/sudoers
    Rule Medium Severity
  • Verify User Who Owns /etc/sudoers File

    To properly set the owner of /etc/sudoers, run the command:
    $ sudo chown root /etc/sudoers 
    Rule Medium Severity
  • Verify Permissions On /etc/sudoers File

    To properly set the permissions of /etc/sudoers, run the command:
    $ sudo chmod 0440 /etc/sudoers
    Rule Medium Severity
  • Ensure That the sudo Binary Has the Correct Permissions

    To properly set the permissions of /usr/bin/sudo, run the command:
    $ sudo chmod 4111 /usr/bin/sudo
    Rule Medium Severity
  • Set Root Account Password Maximum Age

    Configure the root account to enforce a <xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_accounts_maximum_age_root" use="legacy"></xccdf-1.2:sub>-day maximum password lifetime restricti...
    Rule Medium Severity
  • Verify Group Who Owns /etc/ipsec.d Directory

    To properly set the group owner of /etc/ipsec.d, run the command:
    $ sudo chgrp root /etc/ipsec.d
    Rule Medium Severity
  • Verify User Who Owns /etc/ipsec.d Directory

    To properly set the owner of /etc/ipsec.d, run the command:
    $ sudo chown root /etc/ipsec.d 
    Rule Medium Severity
  • Verify Permissions On /etc/ipsec.d Directory

    To properly set the permissions of /etc/ipsec.d, run the command:
    $ sudo chmod 0700 /etc/ipsec.d
    Rule Medium Severity
  • Verify Group Who Owns /etc/ipsec.conf File

    To properly set the group owner of /etc/ipsec.conf, run the command:
    $ sudo chgrp root /etc/ipsec.conf
    Rule Medium Severity

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules