Skip to content
ATO Pathways
  Log In

CIS Ubuntu 20.04 Level 2 Workstation Benchmark

Rules and Groups employed by this XCCDF Profile

  • Ensure Base Chains Exist for Nftables

    Tables in nftables hold chains. Each table only has one address family and only applies to packets of this family. Tables can have one of six famil...
    Rule Medium Severity
    Show

  • Set nftables Configuration for Loopback Traffic

    Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.
    Rule Medium Severity
    Show

  • Ensure a Table Exists for Nftables

    Tables in nftables hold chains. Each table only has one address family and only applies to packets of this family. Tables can have one of six famil...
    Rule Medium Severity
    Show

  • Uncomplicated Firewall (ufw)

    The Linux kernel in Ubuntu provides a packet filtering system called netfilter, and the traditional interface for manipulating netfilter are the ip...
    Group
    Show

  • Install ufw Package

    The ufw package can be installed with the following command: 
    $ apt-get install ufw
    Rule Medium Severity
    Show

  • Remove ufw Package

    The ufw package can be removed with the following command: 
    $ apt-get remove ufw
    Rule Medium Severity
    Show

  • Verify ufw Enabled

    The ufw service can be enabled with the following command: 
    $ sudo systemctl enable ufw.service
    Rule Medium Severity
    Show

  • Ensure ufw Default Deny Firewall Policy

    A default deny policy on connections ensures that any unconfigured network usage will be rejected. Note: Any port or protocol without a explicit a...
    Rule Medium Severity
    Show

  • Set UFW Loopback Traffic

    Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.
    Rule Medium Severity
    Show

  • Uncommon Network Protocols

    The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code ...
    Group
    Show

  • Disable DCCP Support

    The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. T...
    Rule Medium Severity
    Show

  • Disable RDS Support

    The Reliable Datagram Sockets (RDS) protocol is a transport layer protocol designed to provide reliable high-bandwidth, low-latency communications ...
    Rule Low Severity
    Show

  • Disable SCTP Support

    The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with...
    Rule Medium Severity
    Show

  • Disable TIPC Support

    The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the sys...
    Rule Low Severity
    Show

  • Wireless Networking

    Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless net...
    Group
    Show

  • Disable Wireless Through Software Configuration

    If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following ...
    Group
    Show

  • Deactivate Wireless Network Interfaces

    Deactivating wireless network interfaces should prevent normal usage of the wireless capability. <br><br> Configure the system to disable all wire...
    Rule Medium Severity
    Show

  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...
    Group
    Show

  • Verify Permissions on Important Files and Directories

    Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses impo...
    Group
    Show

  • Verify that All World-Writable Directories Have Sticky Bits Set

    When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky b...
    Rule Medium Severity
    Show

  • Ensure No World-Writable Files Exist

    It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific a...
    Rule Medium Severity
    Show

  • Ensure All Files Are Owned by a Group

    If any file is not group-owned by a group present in /etc/group, the cause of the lack of group-ownership must be investigated. Following this, tho...
    Rule Medium Severity
    Show

  • Ensure All Files Are Owned by a User

    If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted...
    Rule Medium Severity
    Show

  • Verify permissions of log files

    Any operating system providing too much information in error messages risks compromising the data and security of the structure, and content of err...
    Rule Medium Severity
    Show

  • Verify Permissions on Files with Local Account Information and Credentials

    The default restrictive permissions for files which act as important security databases such as <code>passwd</code>, <code>shadow</code>, <code>gro...
    Group
    Show

  • Verify Group Who Owns Backup group File

    To properly set the group owner of /etc/group-, run the command: 
    $ sudo chgrp root /etc/group-
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup gshadow File

    To properly set the group owner of /etc/gshadow-, run the command: 
    $ sudo chgrp shadow /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup passwd File

    To properly set the group owner of /etc/passwd-, run the command: 
    $ sudo chgrp root /etc/passwd-
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup shadow File

    To properly set the group owner of /etc/shadow-, run the command: 
    $ sudo chgrp shadow /etc/shadow-
    Rule Medium Severity
    Show

  • Verify Group Who Owns group File

    To properly set the group owner of /etc/group, run the command: 
    $ sudo chgrp root /etc/group
    Rule Medium Severity
    Show

  • Verify Group Who Owns gshadow File

    To properly set the group owner of /etc/gshadow, run the command: 
    $ sudo chgrp shadow /etc/gshadow
    Rule Medium Severity
    Show

  • Verify Group Who Owns passwd File

    To properly set the group owner of /etc/passwd, run the command: 
    $ sudo chgrp root /etc/passwd
    Rule Medium Severity
    Show

  • Verify Group Who Owns shadow File

    To properly set the group owner of /etc/shadow, run the command: 
    $ sudo chgrp shadow /etc/shadow
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup group File

    To properly set the owner of /etc/group-, run the command: 
    $ sudo chown root /etc/group-
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup gshadow File

    To properly set the owner of /etc/gshadow-, run the command: 
    $ sudo chown root /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify User Who Owns Backup passwd File

    To properly set the owner of /etc/passwd-, run the command: 
    $ sudo chown root /etc/passwd-
    Rule Medium Severity
    Show

  • Verify Group Who Owns Backup shadow File

    To properly set the owner of /etc/shadow-, run the command: 
    $ sudo chown root /etc/shadow-
    Rule Medium Severity
    Show

  • Verify User Who Owns group File

    To properly set the owner of /etc/group, run the command: 
    $ sudo chown root /etc/group
    Rule Medium Severity
    Show

  • Verify User Who Owns gshadow File

    To properly set the owner of /etc/gshadow, run the command: 
    $ sudo chown root /etc/gshadow
    Rule Medium Severity
    Show

  • Verify User Who Owns passwd File

    To properly set the owner of /etc/passwd, run the command: 
    $ sudo chown root /etc/passwd
    Rule Medium Severity
    Show

  • Verify User Who Owns shadow File

    To properly set the owner of /etc/shadow, run the command: 
    $ sudo chown root /etc/shadow
    Rule Medium Severity
    Show

  • Verify Permissions on Backup group File

    To properly set the permissions of /etc/group-, run the command: 
    $ sudo chmod 0644 /etc/group-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup gshadow File

    To properly set the permissions of /etc/gshadow-, run the command: 
    $ sudo chmod 0640 /etc/gshadow-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup passwd File

    To properly set the permissions of /etc/passwd-, run the command: 
    $ sudo chmod 0644 /etc/passwd-
    Rule Medium Severity
    Show

  • Verify Permissions on Backup shadow File

    To properly set the permissions of /etc/shadow-, run the command: 
    $ sudo chmod 0640 /etc/shadow-
    Rule Medium Severity
    Show

  • Verify Permissions on group File

    To properly set the permissions of /etc/group, run the command: 
    $ sudo chmod 0644 /etc/group
    Rule Medium Severity
    Show

  • Verify Permissions on gshadow File

    To properly set the permissions of /etc/gshadow, run the command: 
    $ sudo chmod 0640 /etc/gshadow
    Rule Medium Severity
    Show

  • Verify Permissions on passwd File

    To properly set the permissions of /etc/passwd, run the command: 
    $ sudo chmod 0644 /etc/passwd
    Rule Medium Severity
    Show

  • Verify Permissions on shadow File

    To properly set the permissions of /etc/shadow, run the command: 
    $ sudo chmod 0640 /etc/shadow
    Rule Medium Severity
    Show

  • Restrict Dynamic Mounting and Unmounting of Filesystems

    Linux includes a number of facilities for the automated addition and removal of filesystems on a running system. These facilities may be necessary...
    Group
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules