Skip to content

ANSSI-BP-028 (enhanced)

Rules and Groups employed by this XCCDF Profile

  • Configure ARP filtering for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.arp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.arp_filter=<xccdf-1.2:sub idref="xccd...
    Rule Medium Severity
  • Configure Response Mode of ARP Requests for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.arp_ignore</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.arp_ignore=<xccdf-1.2:sub idref="xccd...
    Rule Medium Severity
  • Prevent Routing External Traffic to Local Loopback on All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.route_localnet</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.route_localnet=0</pre> To make su...
    Rule Medium Severity
  • Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1</pre> To make sure that th...
    Rule Medium Severity
  • Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0</pre> To mak...
    Rule Medium Severity
  • Configure Sending and Accepting Shared Media Redirects for All IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.shared_media=<xccdf-1.2:sub idref="...
    Rule Medium Severity
  • Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0</pre...
    Rule Medium Severity
  • Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=...
    Rule Medium Severity
  • Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1</pre> To make sure...
    Rule Medium Severity
  • Configure Kernel Parameter for Accepting Secure Redirects By Default

    To set the runtime status of the <code>net.ipv4.conf.default.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0</pre...
    Rule Medium Severity
  • Configure Sending and Accepting Shared Media Redirects by Default

    To set the runtime status of the <code>net.ipv4.conf.default.shared_media</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.shared_media=<xccdf-1.2:sub...
    Rule Medium Severity
  • Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.icmp_ignore_bogus_error_responses</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_response...
    Rule Unknown Severity
  • Set Kernel Parameter to Increase Local Port Range

    To set the runtime status of the <code>net.ipv4.ip_local_port_range</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.ip_local_port_range=32768 65535</pre> To make ...
    Rule Medium Severity
  • Enable Kernel Parameter to Use TCP RFC 1337 on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.tcp_rfc1337</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.tcp_rfc1337=1</pre> To make sure that the setting is p...
    Rule Medium Severity
  • Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces

    To set the runtime status of the <code>net.ipv4.tcp_syncookies</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.tcp_syncookies=1</pre> To make sure that the settin...
    Rule Medium Severity
  • Network Parameters for Hosts Only

    If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.
    Group
  • Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0</pre> To make su...
    Rule Medium Severity
  • Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default

    To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0</pre> To...
    Rule Medium Severity
  • Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces

    To set the runtime status of the <code>net.ipv4.ip_forward</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.ip_forward=0</pre> To make sure that the setting is per...
    Rule Medium Severity
  • nftables

    <code>If firewalld or iptables are being used in your environment, please follow the guidance in their respective section and pass-over the guidance in this section.</code><br><br> nftables is a su...
    Group
  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access. <br> <br> Severa...
    Group
  • Verify Permissions on Important Files and Directories

    Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verifie...
    Group
  • Ensure All World-Writable Directories Are Owned by root User

    All directories in local partitions which are world-writable should be owned by root. If any world-writable directories are not owned by root, this should be investigated. Following this, the files...
    Rule Medium Severity
  • Verify that All World-Writable Directories Have Sticky Bits Set

    When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may ...
    Rule Medium Severity
  • Verify that system commands directories have root as a group owner

    System commands are stored in the following directories: by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin </pre> All these directories should have <code>root</code...
    Rule Medium Severity
  • Verify that system commands directories have root ownership

    System commands are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin </pre> All these directories should be owned by the <code>...
    Rule Medium Severity
  • Verify Permissions on System.map Files

    The System.map files are symbol map files generated during the compilation of the Linux kernel. They contain the mapping between kernel symbols and their corresponding memory addresses. In general,...
    Rule Low Severity
  • Ensure All SGID Executables Are Authorized

    The SGID (set group id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthorized SGID files is determine if any were not install...
    Rule Medium Severity
  • Ensure All SUID Executables Are Authorized

    The SUID (set user id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthorized SUID files is determine if any were not installe...
    Rule Medium Severity
  • Ensure No World-Writable Files Exist

    It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific applications before making changes. Also, monitor f...
    Rule Medium Severity
  • Ensure All Files Are Owned by a Group

    If any file is not group-owned by a group present in /etc/group, the cause of the lack of group-ownership must be investigated. Following this, those files should be deleted or assigned to an appro...
    Rule Medium Severity
  • Ensure All Files Are Owned by a User

    If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate user. Locate the m...
    Rule Medium Severity
  • Enable Kernel Parameter to Enforce DAC on Hardlinks

    To set the runtime status of the <code>fs.protected_hardlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected_hardlinks=1</pre> To make sure that the setting ...
    Rule Medium Severity
  • Enable Kernel Parameter to Enforce DAC on Symlinks

    To set the runtime status of the <code>fs.protected_symlinks</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w fs.protected_symlinks=1</pre> To make sure that the setting is...
    Rule Medium Severity
  • Verify Permissions on Files with Local Account Information and Credentials

    The default restrictive permissions for files which act as important security databases such as <code>passwd</code>, <code>shadow</code>, <code>group</code>, and <code>gshadow</code> files must be ...
    Group
  • Verify Group Who Owns group File

    To properly set the group owner of /etc/group, run the command:
    $ sudo chgrp root /etc/group
    Rule Medium Severity
  • Verify Group Who Owns gshadow File

    To properly set the group owner of /etc/gshadow, run the command:
    $ sudo chgrp root /etc/gshadow
    Rule Medium Severity
  • Verify Group Who Owns passwd File

    To properly set the group owner of /etc/passwd, run the command:
    $ sudo chgrp root /etc/passwd
    Rule Medium Severity
  • Verify Group Who Owns shadow File

    To properly set the group owner of /etc/shadow, run the command:
    $ sudo chgrp shadow /etc/shadow
    Rule Medium Severity
  • Verify User Who Owns group File

    To properly set the owner of /etc/group, run the command:
    $ sudo chown root /etc/group 
    Rule Medium Severity
  • Verify User Who Owns gshadow File

    To properly set the owner of /etc/gshadow, run the command:
    $ sudo chown root /etc/gshadow 
    Rule Medium Severity
  • Verify User Who Owns passwd File

    To properly set the owner of /etc/passwd, run the command:
    $ sudo chown root /etc/passwd 
    Rule Medium Severity
  • Verify User Who Owns shadow File

    To properly set the owner of /etc/shadow, run the command:
    $ sudo chown root /etc/shadow 
    Rule Medium Severity
  • Verify Permissions on group File

    To properly set the permissions of /etc/group, run the command:
    $ sudo chmod 0644 /etc/group
    Rule Medium Severity
  • Verify Permissions on gshadow File

    To properly set the permissions of /etc/gshadow, run the command:
    $ sudo chmod 0000 /etc/gshadow
    Rule Medium Severity
  • Verify Permissions on passwd File

    To properly set the permissions of /etc/passwd, run the command:
    $ sudo chmod 0644 /etc/passwd
    Rule Medium Severity
  • Verify Permissions on shadow File

    To properly set the permissions of /etc/shadow, run the command:
    $ sudo chmod 0640 /etc/shadow
    Rule Medium Severity
  • Verify File Permissions Within Some Important Directories

    Some directories contain files whose confidentiality or integrity is notably important and may also be susceptible to misconfiguration over time, particularly if unpackaged software is installed. A...
    Group
  • Verify that system commands files are group owned by root or a system account

    System commands files are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin </pre> All files in these directories should be owned by ...
    Rule Medium Severity
  • Verify that System Executables Have Root Ownership

    System executables are stored in the following directories by default: <pre>/bin /sbin /usr/bin /usr/libexec /usr/local/bin /usr/local/sbin /usr/sbin</pre> All files in these directories should be ...
    Rule Medium Severity

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules