Skip to content
Log In

PCI-DSS v4.0 Control Baseline for Red Hat Enterprise Linux 7

Rules and Groups employed by this XCCDF Profile

  • Verify Group Who Owns cron.hourly

    To properly set the group owner of /etc/cron.hourly, run the command: 
    $ sudo chgrp root /etc/cron.hourly
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.monthly

    To properly set the group owner of /etc/cron.monthly, run the command: 
    $ sudo chgrp root /etc/cron.monthly
    Rule Medium Severity
    Show

  • Verify Group Who Owns cron.weekly

    To properly set the group owner of /etc/cron.weekly, run the command: 
    $ sudo chgrp root /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Group Who Owns Crontab

    To properly set the group owner of /etc/crontab, run the command: 
    $ sudo chgrp root /etc/crontab
    Rule Medium Severity
    Show

  • Verify Owner on cron.d

    To properly set the owner of /etc/cron.d, run the command: 
    $ sudo chown root /etc/cron.d
    Rule Medium Severity
    Show

  • Verify Owner on cron.daily

    To properly set the owner of /etc/cron.daily, run the command: 
    $ sudo chown root /etc/cron.daily
    Rule Medium Severity
    Show

  • Verify Owner on cron.hourly

    To properly set the owner of /etc/cron.hourly, run the command: 
    $ sudo chown root /etc/cron.hourly
    Rule Medium Severity
    Show

  • Verify Owner on cron.monthly

    To properly set the owner of /etc/cron.monthly, run the command: 
    $ sudo chown root /etc/cron.monthly
    Rule Medium Severity
    Show

  • Verify Owner on cron.weekly

    To properly set the owner of /etc/cron.weekly, run the command: 
    $ sudo chown root /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Owner on crontab

    To properly set the owner of /etc/crontab, run the command: 
    $ sudo chown root /etc/crontab
    Rule Medium Severity
    Show

  • Verify Permissions on cron.d

    To properly set the permissions of /etc/cron.d, run the command: 
    $ sudo chmod 0700 /etc/cron.d
    Rule Medium Severity
    Show

  • Verify Permissions on cron.daily

    To properly set the permissions of /etc/cron.daily, run the command: 
    $ sudo chmod 0700 /etc/cron.daily
    Rule Medium Severity
    Show

  • Verify Permissions on cron.hourly

    To properly set the permissions of /etc/cron.hourly, run the command: 
    $ sudo chmod 0700 /etc/cron.hourly
    Rule Medium Severity
    Show

  • Verify Permissions on cron.monthly

    To properly set the permissions of /etc/cron.monthly, run the command: 
    $ sudo chmod 0700 /etc/cron.monthly
    Rule Medium Severity
    Show

  • Verify Permissions on cron.weekly

    To properly set the permissions of /etc/cron.weekly, run the command: 
    $ sudo chmod 0700 /etc/cron.weekly
    Rule Medium Severity
    Show

  • Verify Permissions on crontab

    To properly set the permissions of /etc/crontab, run the command: 
    $ sudo chmod 0600 /etc/crontab
    Rule Medium Severity
    Show

  • Restrict at and cron to Authorized Users if Necessary

    The <code>/etc/cron.allow</code> and <code>/etc/at.allow</code> files contain lists of users who are allowed to use <code>cron</code> and at to delay execution of processes. If these files exist an...
    Group
    Show

  • Ensure that /etc/at.deny does not exist

    The file /etc/at.deny should not exist. Use /etc/at.allow instead.
    Rule Medium Severity
    Show

  • Ensure that /etc/cron.deny does not exist

    The file /etc/cron.deny should not exist. Use /etc/cron.allow instead.
    Rule Medium Severity
    Show

  • Verify Group Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be group-owned by <code>root</code>. To properly set the group owner of <code>/etc/cron.allow</code>, run the command: <pre>$ sudo chgrp root /etc/c...
    Rule Medium Severity
    Show

  • Verify User Who Owns /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must be owned by <code>root</code>. To properly set the owner of <code>/etc/cron.allow</code>, run the command: <pre>$ sudo chown root /etc/cron.allow </...
    Rule Medium Severity
    Show

  • Verify Permissions on /etc/cron.allow file

    If <code>/etc/cron.allow</code> exists, it must have permissions <code>0600</code> or more restrictive. To properly set the permissions of <code>/etc/cron.allow</code>, run the command: <pre>$ su...
    Rule Medium Severity
    Show

  • DHCP

    The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server. <br><br> This guide recommends configuring networ...
    Group
    Show

  • Disable DHCP Server

    The DHCP server <code>dhcpd</code> is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled...
    Group
    Show

  • Uninstall DHCP Server Package

    If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The dhcp package can be removed with the following command: 
    $ sudo yum erase dhcp
    Rule Medium Severity
    Show

  • FTP Server

    FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured an...
    Group
    Show

  • Mail Server Software

    Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not r...
    Group
    Show

  • Configure SMTP For Mail Clients

    This section discusses settings for Postfix in a submission-only e-mail configuration.
    Group
    Show

  • Disable Postfix Network Listening

    Edit the file <code>/etc/postfix/main.cf</code> to ensure that only the following <code>inet_interfaces</code> line appears: <pre>inet_interfaces = <xccdf-1.2:sub idref="xccdf_org.ssgproject.conten...
    Rule Medium Severity
    Show

  • NFS and RPC

    The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circumstances under which it is possible to disable NF...
    Group
    Show

  • Disable All NFS Services if Possible

    If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable subsystems required by NFS.
    Group
    Show

  • Disable Services Used Only by NFS

    If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd. <br><br> All of these daemons run with elevated privileges, and many listen for network connections. If they ar...
    Group
    Show

  • Disable rpcbind Service

    The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they e...
    Rule Low Severity
    Show

  • Network Time Protocol

    The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can...
    Group
    Show

  • The Chrony package is installed

    System time should be synchronized between all systems in an environment. This is typically done by establishing an authoritative time server or set of servers and having all systems synchronize th...
    Rule Medium Severity
    Show

  • Enable the NTP Daemon

    Run the following command to determine the current status of the <code>chronyd</code> service: <pre>$ sudo systemctl is-active chronyd</pre> If the service is running, it should return the follow...
    Rule Medium Severity
    Show

  • Enable the NTP Daemon

    The ntpd service can be enabled with the following command: 
    $ sudo systemctl enable ntpd.service
    Rule Medium Severity
    Show

  • Ensure that chronyd is running under chrony user account

    chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More informati...
    Rule Medium Severity
    Show

  • A remote time server for Chrony is configured

    <code>Chrony</code> is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. M...
    Rule Medium Severity
    Show

  • Specify Additional Remote NTP Servers

    Additional NTP servers can be specified for time synchronization in the file <code>/etc/ntp.conf</code>. To do so, add additional lines of the following form, substituting the IP address or hostna...
    Rule Unknown Severity
    Show

  • Specify a Remote NTP Server

    To specify a remote NTP server for time synchronization, edit the file <code>/etc/ntp.conf</code>. Add or correct the following lines, substituting the IP or hostname of a remote NTP server for <em...
    Rule Medium Severity
    Show

  • Obsolete Services

    This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best a...
    Group
    Show

  • Ensure rsyncd service is disabled

    The rsyncd service can be disabled with the following command: 
    $ sudo systemctl mask --now rsyncd.service
    Rule Medium Severity
    Show

  • Xinetd

    The <code>xinetd</code> service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been large...
    Group
    Show

  • Uninstall xinetd Package

    The xinetd package can be removed with the following command: 
    $ sudo yum erase xinetd
    Rule Low Severity
    Show

  • NIS

    The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS...
    Group
    Show

  • Remove NIS Client

    The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system configuration files. The NIS client (<code>ypbind</cod...
    Rule Unknown Severity
    Show

  • Uninstall ypserv Package

    The ypserv package can be removed with the following command: 
    $ sudo yum erase ypserv
    Rule High Severity
    Show

  • Rlogin, Rsh, and Rexec

    The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.
    Group
    Show

  • Uninstall rsh-server Package

    The rsh-server package can be removed with the following command: 
    $ sudo yum erase rsh-server
    Rule High Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules