Skip to content
ATO Pathways
  Log In

VPP - Protection Profile for Virtualization v. 1.0 for Red Hat Virtualization Host (RHVH)

Rules and Groups employed by this XCCDF Profile

  • UEFI GRUB2 bootloader configuration

    UEFI GRUB2 bootloader configuration
    Group
    Show

  • Set the UEFI Boot Loader Password

    The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings. <br><br> Since plaintext passw...
    Rule High Severity
    Show

  • Network Configuration and Firewalls

    Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses th...
    Group
    Show

  • Wireless Networking

    Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless net...
    Group
    Show

  • Disable Wireless Through Software Configuration

    If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following ...
    Group
    Show

  • Disable Bluetooth Service

    The <code>bluetooth</code> service can be disabled with the following command: <pre>$ sudo systemctl mask --now bluetooth.service</pre> <pre>$ sud...
    Rule Medium Severity
    Show

  • Disable Bluetooth Kernel Module

    The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate <code>/etc/mo...
    Rule Medium Severity
    Show

  • File Permissions and Masks

    Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...
    Group
    Show

  • Restrict Dynamic Mounting and Unmounting of Filesystems

    Linux includes a number of facilities for the automated addition and removal of filesystems on a running system. These facilities may be necessary...
    Group
    Show

  • Disable Modprobe Loading of USB Storage Driver

    To prevent USB storage devices from being used, configure the kernel module loading system to prevent automatic loading of the USB storage driver. ...
    Rule Medium Severity
    Show

  • Restrict Programs from Dangerous Execution Patterns

    The recommendations in this section are designed to ensure that the system's features to protect against potentially dangerous program execution ar...
    Group
    Show

  • Enable ExecShield

    ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These featu...
    Group
    Show

  • Enable ExecShield via sysctl

    By default on Red Hat Virtualization 4 64-bit systems, ExecShield is enabled and can only be disabled if the hardware does not support ExecShield o...
    Rule Medium Severity
    Show

  • Restrict Exposed Kernel Pointer Addresses Access

    To set the runtime status of the <code>kernel.kptr_restrict</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.kptr_r...
    Rule Medium Severity
    Show

  • Enable Randomized Layout of Virtual Address Space

    To set the runtime status of the <code>kernel.randomize_va_space</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w kernel.r...
    Rule Medium Severity
    Show

  • SELinux

    SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that p...
    Group
    Show

  • Ensure SELinux Not Disabled in /etc/default/grub

    SELinux can be disabled at boot time by an argument in <code>/etc/default/grub</code>. Remove any instances of <code>selinux=0</code> from the kern...
    Rule Medium Severity
    Show

  • Ensure No Daemons are Unconfined by SELinux

    Daemons for which the SELinux policy does not contain rules will inherit the context of the parent process. Because daemons are launched during sta...
    Rule Medium Severity
    Show

  • Configure SELinux Policy

    The SELinux <code>targeted</code> policy is appropriate for general-purpose desktops and servers, as well as systems in many other roles. To config...
    Rule Medium Severity
    Show

  • Ensure SELinux State is Enforcing

    The SELinux state should be set to <code><xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_selinux_state" use="legacy"></xccdf-1.2:sub><...
    Rule High Severity
    Show

  • SELinux - Booleans

    Enable or Disable runtime customization of SELinux system policies without having to reload or recompile the SELinux policy.
    Group
    Show

  • Enable the fips_mode SELinux Boolean

    By default, the SELinux boolean <code>fips_mode</code> is enabled. This allows all SELinux domains to execute in <code>fips_mode</code>. If this se...
    Rule Medium Severity
    Show

  • Services

    The best protection against vulnerable software is running less software. This section describes how to review the software which Red Hat Virtualiz...
    Group
    Show

  • SSH Server

    The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between tw...
    Group
    Show

  • Verify Permissions on SSH Server Private *_key Key Files

    SSH server private keys - files that match the <code>/etc/ssh/*_key</code> glob, have to have restricted permissions. If those files are owned by t...
    Rule Medium Severity
    Show

  • Verify Permissions on SSH Server Public *.pub Key Files

    To properly set the permissions of /etc/ssh/*.pub, run the command: 
    $ sudo chmod 0644 /etc/ssh/*.pub
    Rule Medium Severity
    Show

  • Configure OpenSSH Server if Necessary

    If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file <code>/etc/ssh/sshd_confi...
    Group
    Show

  • Set SSH Client Alive Count Max to zero

    The SSH server sends at most <code>ClientAliveCountMax</code> messages during a SSH session and waits for a response from the SSH client. The optio...
    Rule Medium Severity
    Show

  • Set SSH Client Alive Interval

    SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automat...
    Rule Medium Severity
    Show

  • Disable Host-Based Authentication

    SSH's cryptographic host-based authentication is more secure than <code>.rhosts</code> authentication. However, it is not recommended that hosts un...
    Rule Medium Severity
    Show

  • Disable Compression Or Set Compression to delayed

    Compression is useful for slow network connections over long distances but can cause performance issues on local LANs. If use of compression is req...
    Rule Medium Severity
    Show

  • Disable SSH Access via Empty Passwords

    Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used ...
    Rule High Severity
    Show

  • Disable GSSAPI Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like GSSAPI. <br> The default SSH configuration disallows ...
    Rule Medium Severity
    Show

  • Disable Kerberos Authentication

    Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like Kerberos. <br> The default SSH configuration disallow...
    Rule Medium Severity
    Show

  • Disable SSH Root Login

    The root user should never be allowed to login to a system directly over a network. To disable root login via SSH, add or correct the following lin...
    Rule Medium Severity
    Show

  • Do Not Allow SSH Environment Options

    Ensure that users are not able to override environment variables of the SSH daemon. <br> The default SSH configuration disables environment process...
    Rule Medium Severity
    Show

  • Enable Use of Strict Mode Checking

    SSHs <code>StrictModes</code> option checks file and ownership permissions in the user's home directory <code>.ssh</code> folder before accepting l...
    Rule Medium Severity
    Show

  • Enable SSH Warning Banner

    To enable the warning banner and ensure it is consistent across the system, add or correct the following line in <code>/etc/ssh/sshd_config</code...
    Rule Medium Severity
    Show

  • Enable SSH Print Last Log

    Ensure that SSH will display the date and time of the last successful account logon. <br> The default SSH configuration enables print of the date a...
    Rule Medium Severity
    Show

  • Set LogLevel to INFO

    The INFO parameter specifices that record login and logout activity will be logged. <br> The default SSH configuration sets the log level to INFO. ...
    Rule Low Severity
    Show

  • Enable Use of Privilege Separation

    When enabled, SSH will create an unprivileged child process that has the privilege of the authenticated user. To enable privilege separation in SSH...
    Rule Medium Severity
    Show

  • System Security Services Daemon

    The System Security Services Daemon (SSSD) is a system daemon that provides access to different identity and authentication providers such as Red H...
    Group
    Show

  • Enable Smartcards in SSSD

    SSSD should be configured to authenticate access to the system using smart cards. To enable smart cards in SSSD, set <code>pam_cert_auth</code> to ...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules