DRAFT - DISA STIG for Red Hat Virtualization Host (RHVH)
Rules and Groups employed by this XCCDF Profile
-
firewalld
The dynamic firewall daemon <code>firewalld</code> provides a dynamically managed firewall with support for network “zones” to assign a level of tr...Group -
Inspect and Activate Default firewalld Rules
Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffi...Group -
Verify firewalld Enabled
Thefirewalldservice can be enabled with the following command:$ sudo systemctl enable firewalld.service
Rule Medium Severity -
Strengthen the Default Ruleset
The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in configuration files under t...Group -
Configure the Firewalld Ports
Configure the <code>firewalld</code> ports to allow approved services to have access to the system. To configure <code>firewalld</code> to open por...Rule Medium Severity -
Set Default firewalld Zone for Incoming Packets
To set the default zone to <code>drop</code> for the built-in default zone which processes incoming IPv4 and IPv6 packets, modify the following lin...Rule Medium Severity -
IPSec Support
Support for Internet Protocol Security (IPsec) is provided with Libreswan.Group -
Verify Any Configured IPSec Tunnel Connections
Libreswan provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. As such, IPsec can be ...Rule Medium Severity -
IPv6
The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the numb...Group -
Disable Support for IPv6 Unless Needed
Despite configuration that suggests support for IPv6 has been disabled, link-local IPv6 address auto-configuration occurs even when only an IPv4 ad...Group -
Disable Support for RPC IPv6
RPC services for NFSv4 try to load transport modules for <code>udp6</code> and <code>tcp6</code> by default, even if IPv6 has been disabled in <cod...Rule Unknown Severity -
Disable IPv6 Addressing on All IPv6 Interfaces
To disable support for (<code>ipv6</code>) addressing on all interface add the following line to <code>/etc/sysctl.d/ipv6.conf</code> (or another f...Rule Medium Severity -
Configure IPv6 Settings if Necessary
A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from ...Group -
Use Privacy Extensions for Address
To introduce randomness into the automatic generation of IPv6 addresses, add or correct the following line in <code>/etc/sysconfig/network-scripts/...Rule Unknown Severity -
Configure Accepting Router Advertisements on All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...Rule Medium Severity -
Disable Accepting ICMP Redirects for All IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...Rule Medium Severity -
Disable Kernel Parameter for IPv6 Forwarding
To set the runtime status of the <code>net.ipv6.conf.all.forwarding</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.i...Rule Medium Severity -
Disable Accepting Router Advertisements on all IPv6 Interfaces by Default
To set the runtime status of the <code>net.ipv6.conf.default.accept_ra</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...Rule Medium Severity -
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces
To set the runtime status of the <code>net.ipv6.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default
To set the runtime status of the <code>net.ipv6.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Kernel Parameters Which Affect Networking
The <code>sysctl</code> utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking...Group -
Network Related Kernel Runtime Parameters for Hosts and Routers
Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against cert...Group -
Disable Accepting ICMP Redirects for All IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sysctl...Rule Medium Severity -
Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net...Rule Unknown Severity -
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ip...Rule Medium Severity -
Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Medium Severity -
Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.default.accept_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.accept_source_route</code> kernel parameter, run the following command: <pre>$ sudo sy...Rule Medium Severity -
Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.log_martians</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w...Rule Unknown Severity -
Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.rp_filter</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w ne...Rule Medium Severity -
Configure Kernel Parameter for Accepting Secure Redirects By Default
To set the runtime status of the <code>net.ipv4.conf.default.secure_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysct...Rule Medium Severity -
Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.icmp_echo_ignore_broadcasts</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.icmp_ignore_bogus_error_responses</code> kernel parameter, run the following command: <pre>$ sudo s...Rule Unknown Severity -
Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces
To set the runtime status of the <code>net.ipv4.tcp_syncookies</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.t...Rule Medium Severity -
Network Parameters for Hosts Only
If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network ...Group -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.conf.all.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w n...Rule Medium Severity -
Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default
To set the runtime status of the <code>net.ipv4.conf.default.send_redirects</code> kernel parameter, run the following command: <pre>$ sudo sysctl ...Rule Medium Severity -
Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces
To set the runtime status of the <code>net.ipv4.ip_forward</code> kernel parameter, run the following command: <pre>$ sudo sysctl -w net.ipv4.ip_fo...Rule Medium Severity -
Uncommon Network Protocols
The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code ...Group -
Disable DCCP Support
The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. T...Rule Medium Severity -
Disable SCTP Support
The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with...Rule Medium Severity -
Wireless Networking
Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless net...Group -
Disable Wireless Through Software Configuration
If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following ...Group -
Disable Bluetooth Service
The <code>bluetooth</code> service can be disabled with the following command: <pre>$ sudo systemctl mask --now bluetooth.service</pre> <pre>$ sud...Rule Medium Severity -
Disable Bluetooth Kernel Module
The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate <code>/etc/mo...Rule Medium Severity -
Deactivate Wireless Network Interfaces
Deactivating wireless network interfaces should prevent normal usage of the wireless capability. <br><br> Configure the system to disable all wire...Rule Medium Severity -
File Permissions and Masks
Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which t...Group -
Verify Permissions on Important Files and Directories
Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses impo...Group
Node 2
The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.