Skip to content
Log In

DRAFT - DISA STIG for Red Hat Virtualization Host (RHVH)

Rules and Groups employed by this XCCDF Profile

  • Warning Banners for System Accesses

    Each system should expose as little information about itself as possible. <br> <br> System banners, which are typically displayed just before a login prompt, give out information about the s...
    Group
    Show

  • Modify the System Login Banner

    To configure the system login banner edit <code>/etc/issue</code>. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is ei...
    Rule Medium Severity
    Show

  • Protect Accounts by Configuring PAM

    PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it sh...
    Group
    Show

  • Ensure PAM Displays Last Logon/Access Notification

    To configure the system to notify users of last logon/access using <code>pam_lastlog</code>, add or correct the <code>pam_lastlog</code> settings in <code>/etc/pam.d/postlogin</code> to include <co...
    Rule Low Severity
    Show

  • Set Lockouts for Failed Password Attempts

    The <code>pam_faillock</code> PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in <code>/usr/share/doc/pam-VERSIO...
    Group
    Show

  • Limit Password Reuse

    Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.
    Rule Medium Severity
    Show

  • Lock Accounts After Failed Password Attempts

    This rule configures the system to lock out accounts after a number of incorrect login attempts using <code>pam_faillock.so</code>. pam_faillock.so module requires multiple entries in pam files. Th...
    Rule Medium Severity
    Show

  • Configure the root Account for Failed Password Attempts

    This rule configures the system to lock out the <code>root</code> account after a number of incorrect login attempts using <code>pam_faillock.so</code>. pam_faillock.so module requires multiple en...
    Rule Medium Severity
    Show

  • Set Interval For Counting Failed Password Attempts

    Utilizing <code>pam_faillock.so</code>, the <code>fail_interval</code> directive configures the system to lock out an account after a number of incorrect login attempts within a specified time peri...
    Rule Medium Severity
    Show

  • Set Lockout Time for Failed Password Attempts

    This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using <code>pam_faillock.so</code>. Ensure that the file <code>/etc/s...
    Rule Medium Severity
    Show

  • Set Password Quality Requirements

    The default <code>pam_pwquality</code> PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of...
    Group
    Show

  • Set Password Quality Requirements with pam_pwquality

    The <code>pam_pwquality</code> PAM module can be configured to meet requirements for a variety of policies. <br> <br> For example, to configure <code>pam_pwquality</code> to require at lea...
    Group
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Digit Characters

    The pam_pwquality module's <code>dcredit</code> parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many ...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Different Characters

    The pam_pwquality module's <code>difok</code> parameter sets the number of characters in a password that must not be present in and old password during a password change. <br> <br> Modify...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters

    The pam_pwquality module's <code>lcredit</code> parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Maximum Consecutive Repeating Characters from Same Character Class

    The pam_pwquality module's <code>maxclassrepeat</code> parameter controls requirements for consecutive repeating characters from the same character class. When set to a positive number, it will rej...
    Rule Medium Severity
    Show

  • Set Password Maximum Consecutive Repeating Characters

    The pam_pwquality module's <code>maxrepeat</code> parameter controls requirements for consecutive repeating characters. When set to a positive number, it will reject passwords which contain more th...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Different Categories

    The pam_pwquality module's <code>minclass</code> parameter controls requirements for usage of different character classes, or types, of character that must exist in a password before it is consider...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Length

    The pam_pwquality module's <code>minlen</code> parameter controls requirements for minimum characters required in a password. Add <code>minlen=<xccdf-1.2:sub idref="xccdf_org.ssgproject.content_val...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Special Characters

    The pam_pwquality module's <code>ocredit=</code> parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be requ...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Session

    To configure the number of retry prompts that are permitted per-session: Edit the <code>pam_pwquality.so</code> statement in <code>/etc/pam.d/system-auth</code> to show <code>retry=<xccdf-1.2:s...
    Rule Medium Severity
    Show

  • Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters

    The pam_pwquality module's <code>ucredit=</code> parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contai...
    Rule Medium Severity
    Show

  • Set Password Hashing Algorithm

    The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.
    Group
    Show

  • Set Password Hashing Algorithm in /etc/libuser.conf

    In <code>/etc/libuser.conf</code>, add or correct the following line in its <code>[defaults]</code> section to ensure the system will use the <xccdf-1.2:sub idref="xccdf_org.ssgproject.content_valu...
    Rule Medium Severity
    Show

  • Set Password Hashing Algorithm in /etc/login.defs

    In <code>/etc/login.defs</code>, add or update the following line to ensure the system will use <xccdf-1.2:sub idref="xccdf_org.ssgproject.content_value_var_password_hashing_algorithm" use="legacy"...
    Rule Medium Severity
    Show

  • Set PAM''s Password Hashing Algorithm - password-auth

    The PAM system service can be configured to only store encrypted representations of passwords. In <code>/etc/pam.d/password-auth</code>, the <code>password</code> section of the file controls which...
    Rule Medium Severity
    Show

  • Set PAM''s Password Hashing Algorithm

    The PAM system service can be configured to only store encrypted representations of passwords. In "/etc/pam.d/system-auth", the <code>password</code> section of the file controls which PAM modules ...
    Rule Medium Severity
    Show

  • Protect Physical Console Access

    It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some...
    Group
    Show

  • Disable debug-shell SystemD Service

    SystemD's <code>debug-shell</code> service is intended to diagnose SystemD related boot issues with various <code>systemctl</code> commands. Once enabled and following a system reboot, the root she...
    Rule Medium Severity
    Show

  • Disable Ctrl-Alt-Del Burst Action

    By default, <code>SystemD</code> will reboot the system if the <code>Ctrl-Alt-Del</code> key sequence is pressed Ctrl-Alt-Delete more than 7 times in 2 seconds. <br> <br> To configure the s...
    Rule High Severity
    Show

  • Disable Ctrl-Alt-Del Reboot Activation

    By default, <code>SystemD</code> will reboot the system if the <code>Ctrl-Alt-Del</code> key sequence is pressed. <br> <br> To configure the system to ignore the <code>Ctrl-Alt-Del</code> k...
    Rule High Severity
    Show

  • Verify that Interactive Boot is Disabled

    Red Hat Virtualization 4 systems support an "interactive boot" option that can be used to prevent services from being started. On a Red Hat Virtualization 4 system, interactive boot can be enabled ...
    Rule Medium Severity
    Show

  • Require Authentication for Single User Mode

    Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup. <br> <br> By default, single-user mode is ...
    Rule Medium Severity
    Show

  • Configure Screen Locking

    When a user must temporarily leave an account logged-in, screen locking should be employed to prevent passersby from abusing the account. User education and training is particularly important for s...
    Group
    Show

  • Configure Console Screen Locking

    A console screen locking mechanism is a temporary action taken when a user stops work and moves away from the immediate physical vicinity of the information system but does not logout because of th...
    Group
    Show

  • Install the tmux Package

    To enable console screen locking, install the <code>tmux</code> package. The <code>tmux</code> package can be installed with the following command: <pre> $ sudo yum install tmux</pre> A session loc...
    Rule Medium Severity
    Show

  • Hardware Tokens for Authentication

    The use of hardware tokens such as smart cards for system login provides stronger, two-factor authentication than using a username and password. In Red Hat Enterprise Linux servers and workstation...
    Group
    Show

  • Install the opensc Package For Multifactor Authentication

    The opensc package can be installed with the following command: 
    $ sudo yum install opensc
    Rule Medium Severity
    Show

  • Install the pcsc-lite package

    The pcsc-lite package can be installed with the following command: 
    $ sudo yum install pcsc-lite
    Rule Medium Severity
    Show

  • Enable the pcscd Service

    The pcscd service can be enabled with the following command: 
    $ sudo systemctl enable pcscd.service
    Rule Medium Severity
    Show

  • Configure opensc Smart Card Drivers

    The OpenSC smart card tool can auto-detect smart card drivers; however, setting the smart card drivers in use by your organization helps to prevent users from using unauthorized smart cards. The de...
    Rule Medium Severity
    Show

  • Force opensc To Use Defined Smart Card Driver

    The OpenSC smart card middleware can auto-detect smart card drivers; however by forcing the smart card driver in use by your organization, opensc will no longer autodetect or use other drivers unle...
    Rule Medium Severity
    Show

  • Protect Accounts by Restricting Password-Based Login

    Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the <code>/etc/passwd</code> and <code>/etc/...
    Group
    Show

  • Set Account Expiration Parameters

    Accounts can be configured to be automatically disabled after a certain time period, meaning that they will require administrator interaction to become usable again. Expiration of accounts after in...
    Group
    Show

  • Set Account Expiration Following Inactivity

    To specify the number of days after a password expires (which signifies inactivity) until an account is permanently disabled, add or correct the following line in <code>/etc/default/useradd</code>:...
    Rule Medium Severity
    Show

  • Assign Expiration Date to Temporary Accounts

    Temporary accounts are established as part of normal account activation procedures when there is a need for short-term accounts. In the event temporary accounts are required, configure the system t...
    Rule Medium Severity
    Show

  • Set Password Expiration Parameters

    The file <code>/etc/login.defs</code> controls several password-related settings. Programs such as <code>passwd</code>, <code>su</code>, and <code>login</code> consult <code>/etc/login.defs</code> ...
    Group
    Show

  • Set Password Maximum Age

    To specify password maximum age for new accounts, edit the file <code>/etc/login.defs</code> and add or correct the following line: <pre>PASS_MAX_DAYS <xccdf-1.2:sub idref="xccdf_org.ssgproject.con...
    Rule Medium Severity
    Show

  • Set Password Minimum Age

    To specify password minimum age for new accounts, edit the file <code>/etc/login.defs</code> and add or correct the following line: <pre>PASS_MIN_DAYS <xccdf-1.2:sub idref="xccdf_org.ssgproject.con...
    Rule Medium Severity
    Show

  • Set Password Minimum Length in login.defs

    To specify password length requirements for new accounts, edit the file <code>/etc/login.defs</code> and add or correct the following line: <pre>PASS_MIN_LEN <xccdf-1.2:sub idref="xccdf_org.ssgproj...
    Rule Medium Severity
    Show

Node 2

siemur/test-space

The content of the drawer really is up to you. It could have form fields, definition lists, text lists, labels, charts, progress bars, etc. Spacing recommendation is 24px margins. You can put tabs in here, and can also make the drawer scrollable.

Capacity
Modules